Low temperature sintering of barium titanate ceramics assisted by addition of lithium fluoride-containing sintering additives

By addition of LiF-containing sintering additives to commercial BaTiO₃ powder, more than 98% of the theoretical density was reached at a sintering temperature of 900 °C both on powder compacts and laminates. Dielectric measurements were performed on ceramic samples in the temperature and frequency ranges from −20 °C to 125 °C and from 10³ to 10⁶ Hz, respectively. High relative permittivity (_r  3160) and low dielectric loss (tan δ  0.014) were measured for tapes of the favoured material. The breakdown strength for tapes with a thickness of about 80 μm is 30 kV/mm. The microprobe analysis showed, that no interfacial reaction between the dielectric layer and the Ag-electrode had occurred.The newly developed barium titanate ceramics completely densifying at 900 °C turned out to be promising for integration of buried capacitors in LTCC multilayers.     

Potency of Different Carbon Sources in Reduction of Microsilica to Synthesize SiC from Mechanically Activated Powder Mixtures

In the present study, the influences of three different types of carbon (carbon black, graphite, and petroleum coke) on SiC synthesis via mechanical activation and sintering were evaluated. In this regard, the phase components, morphology, and the formation mechanism were investigated. SiC nanoparticles were detected to be formed after 4 h of milling and sintering at 1450°C, regardless of the sources of carbon. The carbon types exert their effects on the morphology of the as‐synthesized particles, where carbon black leads to form rod‐like SiC particles and the other two carbon types result in semi‐spherical SiC particles. This is due to the dominant mechanism in the mentioned process. The rod‐like particles obtained from the carbon black‐containing powder were synthesized via the VSL mechanism, whereas the solid‐state reactions occurred to form the SiC particles in the graphite‐ or petroleum coke‐containing samples. In the VSL mechanism, any increase in the milling time leads to facilitate the SiC formation due to entrance of Fe debris, whereas in the other samples (graphite or petroleum coke) the procedure is reversed.     

CFD simulation of the effect of rain on the performance of horizontal wind turbines

Wind turbine power output is influenced by environmental conditions, including rain. Therefore, a better understanding of the effect of rain on the performance of wind turbines is necessary. Our coupled Lagrangian‐Eulerian multiphase computational fluid dynamics model was modified to more accurately simulate the momentum transfer during water film formation on the airfoils of a horizontal‐axis turbine and the performance loss caused by the rainwater film on the National Renewable Energy Laboratory (NREL) turbine performance. To obtain three‐dimensional numerical simulation of the wind turbine in manageable computational time, simplifying assumptions were made and the validity of these assumptions was verified by simulating the flow over the S809 airfoil of the NREL turbine. In a dry environment, simulation of turbine power output agreed well with NREL experimental data. Our multiphase model showed that the rain film accumulation and flow on the surface of the turbine airfoil reduces the power output of the turbine. © 2017 American Institute of Chemical Engineers AIChE J, 63: 5375–5383, 2017     

Synthesis and characterization of a novel silicone containing vinylic macromonomer and its uses in the preparation of poly (silicone‐co‐styrene‐co‐butylacrylate) with montmorillonite nanocomposite emulsion

A new silicone containing macromonomer, 4‐(methacrylamido) phenoxy polymethylhydrosiloxane (4‐MPMHS) with a vinyl group, was successfully synthesized. Then poly (silicone‐co‐styrene‐co‐butylacrylate) with montmorillonite, P (Si‐co‐St‐co‐BA) with MMT nanocomposite emulsion was prepared by in situ intercalative emulsion polymerization of styrene (St), butyl acrylate (BA), and 4‐MPMHS, in the presence of organic modified montmorillonite (OMMT) with different OMMT contents (0, 0.5, 1.0, 1.5, and 2 wt %). Potassium persulphate (KPS) was used as an initiator and sodium lauryl sulfoacetate (SLSA) and nonyl phenol ethylene oxide—40 U (NP‐40) were used as anionic and nonionic emulsifiers, respectively. The resulting macromonomer was characterized by elemental analysis, Fourier transformer infrared (FT‐IR), proton (¹H NMR), and carbon (¹³C NMR) nuclear magnetic resonance spectroscopes. The OMMT was characterized by FT‐IR and X‐ray diffraction (XRD). The nanocomposite emulsions were characterized by using Fourier Transform infrared spectroscopy (FT‐IR), laser light scattering, and surface tension method. Thermal properties of the copolymers were studied using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) and then the effects of OMMT percent on the water absorption ratio and drying speed were examined. Results showed that OMMT could improve the properties of emulsion. In other words, the properties of nanocomposite emulsions were better when compared with those of the silicone‐acrylate emulsion. The property of nanocomposite emulsion containing 1 wt % OMMT was the best one, and the following advantages were obtained: smaller particle size, faster drying speed, smaller surface tension, and improved water resistance by the incorporation of OMMT. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

不同螺栓布置下螺栓连接的滞回性能

从1994年北岭地震中可看到,栓焊节点的抗震性能较差。因此,常用于工业建筑和高层建筑中的抗弯框架多采用端板连接和T型螺栓连接。采用有限元方法,通过改变螺栓的纵横布置对比了14个试件的滞回性能。结果表明:假定两者总的耗能能力相同,则T型螺栓连接的抗弯能力和初始转动刚度均比基于AISC规范设计的端板螺栓连接高。在往复荷载作用下,螺栓布置的改变对T型螺栓连接破坏模式的影响要大于端板连接,端板连接更适用于具有初始几何缺陷的结构。     

A comparative study of landslide susceptibility maps produced using support vector machine with different kernel functions and entropy data mining models in China

Bulletin of Engineering Geology and the Environment - The main objective of the current study is to apply a random forest (RF) data-driven model and prioritization of landslide conditioning factors...     

The structural variability of quarters and residential areas in the historical texture of the city of Yazd based on Islamic rules and jurisprudence: a case study of Golchinan quarter

According to many researchers and scholars, religious beliefs can be considered as the most influential factor in forming Muslim urban spaces and their architectural elements. In fact, historical cities reflect the culture and beliefs of their residences. Among all historical places in Iranian cities, the historical texture of the city of Yazd, especially the quarters since the age of Qajar dynasty, are well preserved. The present study aims at identifying the Islamic principles and values influencing the formation of architectural spaces and the extent of their applications in one of the historical quarters known as Golchinan. The results of the conformation of the theoretical findings with the data acquired from field studies revealed that almost 90% of the urban and architectural spaces (e.g. residential areas, mosques, bazaars, and pathways) in Yazd are directly influenced by Islamic principles. In other words, there is a strong conformity between the accepted Islamic values of the society and what actually was applied to urban constructions during Qajar dynasty.     

A novel algorithm to study the impact of the mismatch on analog building blocks: a case study in basic 35 nm CMOS amplifiers

In this paper, the context of modeling of the impact of mismatch and statistical variations on analogue circuit building blocks is emphasized. The aim is to develop a new algorithm which predicts the statistical behavior of important parameters of an amplifier including output resistance, voltage gain and trans-conductance. The relative error of standard deviation of statistical parameters will remain less than 5% compared with the most accurate Monte-Carlo (MC) simulations using atomistic library model-cards. In comparison with other models which are based on the normal distribution of parameters, the proposed model does not need this limiting presumption. On the other hand, the proposed algorithm is more efficient compared with time consuming MC atomistic simulations.     

Exhaust emission profiling of fatty acid methyl esters and NOx control studies using selective synthetic and natural additives

Clean Technologies and Environmental Policy - The present study was focused on the optimized biodiesel production using Moringa oleifera (M. oleifera) and rice bran oils, characterization, and...