Electronic structure of the buried interface between an organic semiconductor, N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD), and metal surfaces

The electronic structures of buried interfaces between an organic semiconductor, N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD) and metal surfaces of Au, Ag, Al and Ca were examined by the new experimental method that we have developed recently. In this method the energy levels at the organic/metal interface can be examined without changing the film thickness and related physical parameters e.g., the vacuum levels of the sample in contrast to the widely-used thickness-dependent photoemission experiments. The results were discussed in view of large interfacial dipole moment of the TPD and metal (Au and Ag) contacts.     

Alloying effects on the hydride formation of Zr(Mn1−xCox)2

To study the alloying effects on ZrMn₂-H system, thermodynamic properties of Zr(Mn_1−xCo_x)₂ hydride were measured by volumetric method. ZrMn₂ gave a single plateau region in the pressure-composition isotherm. On the other hand, double plateaus were clearly observed in Zr(Mn_0.7Co_0.3)₂ and Zr(Mn_0.6Co_0.4)₂-H systems. The appearance of the double plateau characteristics would be explained in view of the hydrogen binding in the tetrahedral occupation sites in Zr(Mn_1−xCo_x)₂. Since the hydrogen binding in the tetrahedral 2ZrMnCo site would be less stable than that in the 2Zr2Mn site, the equilibrium pressure increases with increasing cobalt content. The appearance of the first plateau was ascribed the increase in the bonding of Mn-H in 2Zr2Mn site adjoining the 2ZrMnCo site.     

Effect of the radio-frequency power on the dielectric properties of hydrogen-containing boron carbon nitride films deposited by plasma-assisted chemical vapor deposition using tris(dimethylamino)boron gas

We investigated the properties of boron carbon nitride film containing hydrogen (BCNH film) deposited using tris(dimethylamino)boron as the source gas. The dielectric constant (k) of BCNH film decreases with decreasing radio-frequency plasma power used for deposition, and can be as low as 1.8 at 10 W. Thermal desorption spectroscopy analysis shows that the film contains a large amount of hydrogen. Fourier transform infrared spectroscopy shows an absorption band at 2960 cm−1, attributed to the asymmetrical stretching mode of C-H in the methyl group. It is thought that increasing the number of C-H bonds, which have a low polarizability, can achieve a lower k value.     

Multi-wavelength intermittent photoluminescence of single CdSe quantum dots

A single chromophore detection using video-microscopy is one of the latest methodologies to reveal unique characteristics, which could not be obtained from ensemble measurements. Among many kinds of subjects, dynamic optical properties observed in colloidal semiconductor nanoparticles are attractive and important not only for the basis of photo-physics but also for application studies, e.g. biological labeling, electronic devices. In this study, fluorescence video-microscopy was performed on cadmium selenide (CdSe) quantum dots (QDs) spin-coated on a glass substrate. From single CdSe QDs detection, emissions at wavelengths separated over 60 nm were observed for the first time. This spectral feature was attributed to the existence of double-emissive relaxation processes in CdSe QDs. Photoluminescence intermittency was also observed both from relaxation processes. Fluorescence video-microscopy, which was advanced in biology, can be applicable for the real-time monitoring of dynamic properties in semiconductor photo-physics.     

Determining factors for anodic polarization curves of typical structural materials of boiling water reactors in high temperature – high purity water

In order to examine the anodic polarization characteristics of typical structural materials of boiling water reactors (BWRs), the anodic polarization curves of type 316L stainless steel (316L SS) and Alloy 182 were measured in deaerated high purity water at 553 K using the previously reported measurement method which was confirmed suitable for high temperature – high purity water. In order to specify which constituent element determines the dissolution characteristics of these materials, the anodic polarization curves of pure iron, pure nickel, and pure chromium were also surveyed. The anodic polarization curve of 316L SS was determined to have active, passive, and transpassive states which were the same as type 304 SS (304 SS) showed. But, Alloy 182 had different polarization characteristics especially near the corrosion potential as it had no active state. From comparison results of the polarization characteristics of these materials and their constituent elements, the corrosion characteristics of these materials were concluded to be mainly determined by the corrosion characteristics of chromium.     

Room-temperature growth of AlN/TiN epitaxial multi-layer by laser molecular beam epitaxy

We have fabricated epitaxial AlN thin films at room temperature on sapphire (0001) substrates with a TiN (111) epitaxial buffer layer by pulsed laser deposition in ultra-high vacuum (laser molecular beam epitaxy method). The TiN buffer layers were also fabricated at room temperature. Four-circle X-ray diffraction analysis and reflection high-energy electron diffraction results indicate the heteroepitaxial structure of AlN (0001)/TiN (111)/sapphire (0001) with the epitaxial relationship of AlN [10-10]||TiN [11-2]||sapphire [11-20]. The surface of the room-temperature grown AlN film was found to be atomically flat, reflecting the nano-stepped surface of ultrasmooth sapphire substrates. Then, we could achieve the room-temperature epitaxial growth of [AlN/TiN] multi-layer. The temperature dependence of resistivity of the AlN/TiN multi-layer film was also measured.     

Effects of ubiquitin C-terminal hydrolase L1 deficiency on mouse ova

Maternal proteins are rapidly degraded by the ubiquitin-proteasome system during oocyte maturation in mice. Ubiquitin C-terminal hydrolase L1 (UCHL1) is highly and specifically expressed in mouse ova and is involved in the polyspermy block. However, the role of UCHL1 in the underlying mechanism of polyspermy block is poorly understood. To address this issue, we performed a comprehensive proteomic analysis to identify maternal proteins that were relevant to the role of UCHL1 in mouse ova using UCHL1-deficient gad. Furthermore, we assessed morphological features in gad mouse ova using transmission electron microscopy. NACHT, LRR, and PYD domain-containing (NALP) family proteins and endoplasmic reticulum (ER) chaperones were identified by proteomic analysis. We also found that the 'maternal antigen that embryos require' (NLRP5 (MATER)) protein level increased significantly in gad mouse ova compared with that in wild-type mice. In an ultrastructural study, gad mouse ova contained less ER in the cortex than in wild-type mice. These results provide new insights into the role of UCHL1 in the mechanism of polyspermy block in mouse ova.     

Effect of overexpression of LAS17 on stress tolerance and the stability of extrachromosomal DNA in Saccharomyces cerevisiae

The effects of the overexpression of LAS17/BEE1, which encodes a yeast protein exhibiting sequence homology to the Wiscott-Aldrich syndrome protein, on the cell growth of Saccharomyces cerevisiae were examined. Sake yeast strain UT-1 grows at a faster rate as a result of the overexpression of LAS17 than control cultures under various stresses such as high temperature, high ethanol concentration, and oxidative stress, and the tolerance to these stresses was increased compared with the control. Moreover, a high cell survival rate was attained with overexpression of LAS17, when cells in the stationary phase of the growth cycle were subjected to heat killing (48 degrees C) or ethanol killing (20% v/v). In addition, the rate of induction of rho- was markedly reduced by overexpression of LAS17 when serine, tyrosine, and aspartic acid were used as N sources and the yeast was cultured at 35 degrees C, while rho- strains in control cultures were induced at a high frequency. After the incubation of cells harboring a multicopy vector in YPD or synthetic complete medium, almost all of the cells inherited the vector at about 15 copies per cell as a result of the overexpression of LAS17, whereas the cells harboring the control vector accounted for only 15% of the total number of cells. These results suggest that Las17p might be a multifunctional protein involved in cell growth regulation, extrachromosomal DNA transportation and stress responses.     

Patterning cultured cells by visible light illumination with photosensitizers

We showed that PC12 cells and 3T3 cells cultured in dishes were killed by illumination with visible white light from a halogen lamp at 7 x 10(4) lx for 5 min in the presence of either 10 microM hematoporphyrin or 2 microM methylene blue as a photosensitizer. This simple technique, based on the photodynamic reaction via generation of reactive oxygen species can be applicable for patterning cultured cells.