Positive chronotropic actions of parathyroid hormone and parathyroid hormone-related peptide are associated with increases in the current, I(f), and the slope of the pacemaker potential

BACKGROUND: The classic calciotropic hormone parathyroid hormone (PTH) and its paracrine factor parathyroid hormone-related protein (PTHrP) both increase heart rate. METHODS AND RESULTS: We used standard electrophysiological techniques to study the effects of PTH and PTHrP on isolated rabbit sinus node, isolated canine Purkinje fibers, and disaggregated rabbit sinus node myocytes. Sinus node maximum diastolic potential, activation voltage, and amplitude were unchanged by PTH or PTHrP (P>.05). However, the slope of phase 4 and the automatic rate were increased at PTH and PTHrP > or = 10 nmol/L (P<.05). Comparable results were seen in canine Purkinje fibers. We then used the perforated-patch technique to study the I(f) pacemaker current in sinus node. PTH 12.5 nmol/L and PTHrP 12.5 to 18 nmol/L increased I(f) at -65 mV by 68+/-41% (n=5) and 69+/-50% (n=5), respectively. Actions of both agents were reversible. The increase in I(f) appeared to result from a change in maximal conductance and not a shift in the voltage dependence of activation. CONCLUSIONS: These observations provide, for the first time, direct electrophysiological support for the chronotropic actions of PTH and PTHrP. They suggest that classic hormones and paracrine factors can have multiple functions and that in the case of PTH and PTHrP, a newly recognized action is to alter automaticity directly.     

Purification and characterisation of cathepsin L from the skeletal muscle of blue scad (Decapterus maruadsi) and comparison of its role with myofibril-bound serine proteinase in the degradation of myofibrillar proteins

The modori phenomenon during surimi production is caused by endogenous proteinases, especially cathepsin L and myofibril-bound serine proteinase (MBSP). Cathepsin L from the skeletal muscle of blue scad (Decapterus maruadsi) was purified to homogeneity by ammonium sulphate fractionation and a series of column chromatographies and revealed a single band with molecular mass of 30 kDa on SDS–PAGE. Peptide mass fingerprinting (PMF) obtained three fragments with 48 amino acid residues, which were highly identical to cathepsin L from other fish species. Its optimal pH and temperature were 5.5 and 55 °C, respectively. Meanwhile, MBSP was purified from the skeletal muscle of blue scad, and the roles of cathepsin L and MBSP in the degradation of myofibrillar proteins were compared. The results indicated that MBSP is more effective than cathepsin L in promoting the degradation of myofibrillar proteins, especially myosin heavy chain (MHC), suggesting that MBSP plays a more significant role.     

A study of reactor neutrino monitoring at the experimental fast reactor JOYO

We carried out a study of neutrino detection at the experimental fast reactor JOYO using a 0.76 tons gadolinium loaded liquid scintillator detector. The detector was set up on the ground level at 24.3 m from the JOYO reactor core of 140 MW thermal power. The measured neutrino event rate from reactor on-off comparison was 1.11±1.24(stat.)±0.46(syst.) events/day. Although the statistical significance of the measurement was not enough, backgrounds in such a compact detector at the ground level were studied in detail and MC simulations were found to describe the data well. A study for improvement of the detector for future such experiments is also shown.     

Traversable Region Estimation for Mobile Robots in an Outdoor Image

This paper describes a novel method to estimate appropriate traversable regions from an outdoor scene image. The traversable regions output by the proposed method reflect the common sense of people. For example, a candidate traversable region is “a paved road somewhat distant from the side ditch.” The input to the traversable region estimation is one color image. First, category is assigned to each pixel in the image. The categorization result is then input to the region estimator. Finally, the traversable region are estimated on the input image. An important aspect of this method is the application of two score functions in region estimation process. One score function places high value on categories selected as traversable paths by subjects. The other function places high value on categories that are not selected as traversable regions but are adjacent to categories with traversable paths. A combination of these two functions produces feasible estimation results. The effectiveness of the combined score functions was evaluated by experiments and a questionnaire.     

Analysis of spatial smoothing effect of short‐term fluctuation of global solar radiation based on data including quantization error

Photovoltaic (PV) systems are attracting attention as one of the promising countermeasures against global warming and the environmental issues. However, the generation output from PV systems is generally unstable and unpredictable. Therefore, large penetration of PV systems may cause some serious impacts on power system operation, such as load frequency control, voltage regulation, etc. Estimation of the influences of PV system installation is becoming important, but it requires simultaneous multipoint solar radiation measurements. The Japan Meteorological Business Support Center has provided 1‐minute meteorological data observed in Japan, but its solar radiation data includes quantization errors. This paper proposes a regeneration method for solar radiation data including quantization errors. It also analyzes the spatial smoothing effect of global solar radiation fluctuations. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(3): 55–63, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21274     

Grain Boundary Segregation Behavior of Boron in Low-Alloy Steel

The boron concentration profiles around prior austenite grain boundaries in Fe-0.05C-0.5Mo-0.001B (mass pct) are examined using aberration-corrected STEM-EELS. In order to obtain the precise distribution of boron around the boundaries, tilt series measurements with thin specimens (<30 nm) are performed and the EEL spectra are analyzed by principal component analysis (PCA) and multivariate curve resolution (MCR). The boron concentration profile changes with the cooling rate from the solid solution temperature. The concentration at grain boundaries is maximized at a medium rate (30 °C/s), where the concentration reaches 8 at. pct, and it decreases at a larger (250 °C/s) or smaller (5 °C/s) rate. On the other hand, the boron distribution becomes wider as the cooling rate becomes smaller. The current results suggest that the boron segregation in the alloy is formed by the “non-equilibrium segregation mechanism.”     

Optimal operation of cogeneration system coordinated by aggregator for providing the demand and supply regulation capacity

Recent growth of renewable energy generations with natural variability, such as photovoltaic generation and wind turbine generation, would make the demand and supply control in a whole power system more difficult, and therefore, alternatives for demand and supply regulation resources would be required. The authors focus on cogeneration system (CGS) as one of regulation resources. In order to procure adequate volume of regulation capability, an aggregator coordinates a number of CGSs efficiently and flexibly considering the wide variety of electricity/thermal demands of CGS owners. This paper proposes a novel optimal operation strategy of CGS coordinated by the aggregator considering the energy balance and operation cost of individual CGS owner. This paper also demonstrates the availability of CGSs for regulation capability by numerical case studies in which the actual consumption profile is employed.     

Operation Assist by Vibration Suppression Control Using Impulse‐Shaped Signals for Power Assist Conveyance System

This paper presents an assist control method for a flexible parts conveyance task using a power assist conveyance system. The assist control method should be designed so as not only to suppress vibration but also to reduce the degradation of operating feel. For this purpose, multiple impulse‐shaped signals are used as feedforward signals in order to reduce the vibration of flexible parts during conveyance. In addition, the adjustment time is introduced to adjust the input timing of the impulse‐shaped signal and to suppress vibration. In order to improve the degradation of operating feel, the smaller amplitudes of the three impulse‐shaped signals are used and input repeatedly. The effectiveness of the proposed system was verified experimentally. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(2): 31–39, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22476