High-performance C60 and picene thin film field-effect transistors with conducting polymer electrodes in bottom contact structure

C₆₀ and picene thin film field-effect transistors (FETs) in bottom contact structure have been fabricated with poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) electrodes for a realization of mechanical flexible organic FETs. The C₆₀ thin film FETs showed n-channel enhancement-type characteristics with the field-effect mobility μ value of 0.41 cm² V^?1 s^?1, while the picene thin film FET showed p-channel enhancement-type characteristics with the μ of 0.61 cm² V^?1 s^?1. The μ values recorded for C₆₀ and picene thin film FETs are comparable to those for C₆₀ and picene thin film FETs with Au electrodes.     

Multiple-wavelength up-conversion laser in Tm/sup 3+/-doped ZBLAN glass fiber

In this letter, we report on a multiple-wavelength up-conversion laser in Tm/sup 3+/-doped ZrF/sub 4/--BaF/sub 2/--LaF/sub 3/--AlF/sub 3/--NaF glass fiber pumped by an 1120-nm fiber laser. Single-wavelength, two-wavelength, and three-wavelength up-conversion lasers can be obtained by adjusting the distance between the coupler mirror and the fiber end, which is attributed to the frequency-filter effect in the etalon composed of the coupler mirror and the fiber end. The effects of the pump power on the performance of dual-wavelength laser were also discussed.     

Well‐Defined Functional Linear Aliphatic Diblock Copolyethers: A Versatile Linear Aliphatic Polyether Platform for Selective Functionalizations and Various Nanostructures

Low‐temperature anionic ring‐opening homopolymerizations and copolymerizations of two glycidol derivatives (allyl glycidyl ether (AGE) and ethoxyethyl glycidyl ether (EEGE)) are studied using a metal‐free catalyst system, 3‐phenyl‐1‐propanol (PPA) (an initiator) and 1‐tert‐butyl‐4,4,4‐tris(dimethylamino)‐2,2‐bis[tris‐(dimethylamino)phosphoranylidenamino]‐2Λ⁵,4Λ⁵‐catenadi(phosphazene) (t‐Bu‐P₄) (a promoter) in order to obtain well‐defined functional linear polyethers and diblock copolymers. With the aid of the catalyst system, AGE is found to successfully undergo anionic ring‐opening polymerization (ROP) even at room temperature (low reaction temperature) without any side reactions, producing well‐defined linear AGE‐homopolymer in a unimodal narrow molecular weight distribution. Under the same conditions, EEGE also undergoes polymerization, producing a linear EEGE‐homopolymer in a unimodal narrow molecular‐weight distribution. In this case, however, a side reaction (i.e., chain‐transfer reaction) is found to occur at low levels during the early stages of polymerization. The chemical properties of the monomers in the context of the homopolymerization reactions are considered in the design of a protocol used to synthesize well‐defined linear diblock copolyethers with a variety of compositions. The approach, anionic polymerization via the sequential step feed of AGE and EEGE as the first and second monomers, is found to be free from side reactions at room temperature. Each block of the obtained linear diblock copolymers undergoes selective deprotection to permit further chemical modification for selective functionalization. In addition, thermal properties and structures of the polymers and their post‐modification products are examined. Overall, this study demonstrates that a low‐temperature metal‐free anionic ROP using the PPA/t‐Bu‐P₄ catalyst system is suitable for the production of well‐defined linear AGE‐homopolymers and their diblock copolymers with the EEGE monomer, which are versatile and selectively functionalizable linear aliphatic polyether platforms for a variety of post‐modifications, nanostructures, and their applications.     

Novel structure of GaAs-based interdigital-gated HEMT plasma devices for solid-state THz wave amplifier

Theoretical analysis of potential distribution in the interdigital-gated high electron mobility transistor (HEMT) plasma wave device was carried out. The dc I–V characteristics of capacitively coupled interdigital structure showed that uniformity of electric field under the interdigital gates was improved compared to the dc-connected interdigital gate structure. Admittance measurements of capacitively coupled interdigital gate structure in the microwave region of 10–40 GHz showed the conductance modulation by drain–source voltage. These results indicate the existence of plasma wave interactions.     

Characterization of interfacial reaction and chemical bonding features of LaOx/HfO2 stack structure formed on thermally-grown SiO2/Si(1 0 0)

A stack structure consisting of ～1.5 nm-thick LaO_x and ～4.0 nm-thick HfO₂ was formed on thermally grown SiO₂ on Si(1 0 0) by MOCVD using dipivaloymethanato precursors, and the influence of N₂ annealing on interfacial reaction for this stack structure was examined by using X-ray photoelectron spectroscopy and Fourier transform infrared attenuated total reflection. We found that compositional mixing between LaO_x and HfO₂ becomes significant from 600 °C upwards and that interfacial reaction between HfLa_yO_z and SiO₂ proceeds consistently at 1000 °C in N₂ ambience.     

A 1.25-inch 60-frames/s 8.3-M-pixel digital-output CMOS image sensor

The ultrahigh-definition television (UDTV) camera system requires an image sensor having four times higher resolution and two times higher frame rate than the conventional HDTV systems. Also, an image sensor with a small optical format and low power consumption is required for practical UDTV camera systems. To respond to these requirements, we have developed an 8.3-M-pixel digital-output CMOS active pixel sensor (APS) for the UDTV application. It features an optical format of 1.25inch, low power consumption of less than 600 mW at dark, while reproducing a low-noise, 60-frames/s progressive scan image. The image sensor is equipped with 1920 on-chip 10-bit analog-to-digital converters and outputs digital data stream through 16 parallel output ports. Design considerations to reproduce a low-noise, high-resolution image at high frame rate of 60 fps are described. Implementation and experimental results of the 8.3-M-pixel CMOS APS are presented.     

Origin of Hole-Trapping States in Solution-Processed Copper(I) Thiocyanate and Defect-Healing by I2 Doping

Solution-processed copper(I) thiocyanate (CuSCN) typically exhibits low crystallinity with short-range order; the defects result in a high density of trap states that limit the device's performance. Despite the extensive electronic applications of CuSCN, its defect properties are not understood in detail. Through X-ray absorption spectroscopy, pristine CuSCN prepared from the standard diethyl sulfide-based recipe is found to contain under-coordinated Cu atoms, pointing to the presence of SCN⁻ vacancies. A defect passivation strategy is introduced by adding solid I₂ to the processing solution. At small concentrations, the iodine is found to exist as I⁻ which can substitute for the missing SCN⁻ ligand, effectively healing the defective sites and restoring the coordination around Cu. Computational study results also verify this point. Applying I₂-doped CuSCN as a p-channel in thin-film transistors shows that the hole mobility increases by more than five times at the optimal doping concentration of 0.5 mol.%. Importantly, the on/off current ratio and the subthreshold characteristics also improve as the I₂ doping method leads to the defect-healing effect while avoiding the creation of detrimental impurity states. An analysis of the capacitance-voltage characteristics corroborates that the trap state density is reduced upon I₂ addition.     

Development of an active targeting liposome encapsulated with high-density colloidal gold for transmission electron microscopy

Active targeting of the liposome is an attractive strategy for drug delivery and in vivo bio-imaging. We previously reported the specific accumulation of Sialyl Lewis X (SLX) liposome to inflamed tissue in arthritic model mice or tumor-bearing mice. SLX-liposome encapsulation with fluorescent substances allows for the visualization of these liposomes by the time-dependent transvascular accumulation of fluorescent signals in the histological sections. In the present study, we developed a new SLX-liposome encapsulated with colloidal gold for transmission electron microscopic observation. We herein describe the characterization of the colloidal gold-loaded SLX-liposomes and demonstrate its specific targeting to the endothelial cells of tumor blood vessels in tumor-bearing mice.     

Colored Fluorescent Silk Made by Transgenic Silkworms

Silk is a protein fiber used to weave fabrics and as a biomaterial in medical applications. Recently, genetically modified silks have been produced from transgenic silkworms. In the present study, transgenic silkworms for the mass production of three colors of fluorescent silks, (green, red, and orange) are generated using a vector originating from the fibroin H chain gene and a classical breeding method. The suitability of the recombinant silks for making fabrics is investigated by harvesting large amounts of the cocoons, obtained from rearing over 20 thousand silkworms. The application of low temperature and a weakly alkaline solution for cooking and reeling enables the production of silk fiber without loss of color. The maximum strain tolerated and Young's modulus of the fluorescent silks are similar to those of ordinary silk, although the maximum stress value of the recombinant silk is slightly lower than that of the control. Fabrics with fluorescent color are demonstrated using the recombinant silk, with the color persisting for over two years. The results indicate that large amounts of genetically modified silk can be made by transgenic silkworms, and the silk is applicable as functional silk fiber for making fabrics and for use in medical applications.     

Earth‐Abundant and Durable Nanoporous Catalyst for Exhaust‐Gas Conversion

Precious metals (Pt and Pd) and rare earth elements (Ce in the form of CeO₂) are typical materials for heterogeneous exhaust‐gas catalysts in automotive systems. However, their limited resources and high market‐driven prices are principal issues in realizing the path toward a more sustainable society. In this regard, herein, a nanoporous NiCuMnO catalyst, which is both abundant and durable, is synthesized by one‐step free dealloying. The catalyst thus developed exhibits catalytic activity and durability for NO reduction and CO oxidation. Microstructure characterization indicates a distinct structural feature: catalytically active Cu/CuO regions are tangled with a stable nanoporous NiMnO network after activation. The results obtained by in situ transmission electron microscopy during NO reduction clearly capture the unique reaction‐induced self‐transformation of the nanostructure. This finding can possibly pave the way for the design of new catalysts for the conversion of exhaust gas based on the element strategy.