Formation of Zirconia Solid Solutions Containing Alumina Prepared by New Preparation Method

In the system ZrO₂–Al₂O₃, a new method for preparing ZrO₂ solid solutions from ZrCl₄ and AlCl₃ using hydrazine monohydrate is investigated. c -ZrO₂ solid solutions containing up to ∼40 mol% Al₂O₃ crystallize at low temperatures from amorphous materials. The formation mechanism is discussed from IR spectral data. The values of the lattice parameter α increase linearly from 0.5072 to 0.5105 nm with increasing Al₂O₃ content. At higher temperatures, transformation of the solid solutions proceeds as follows: c ( SS ) → t ( ss ) → t ( ss ) +α-Al₂O₃→ m +α-Al₂O₃. m -ZrO₂–α-Al₂O₃ composite ceramics are fabricated by hot isostatic pressing for 2 h at 1250°C and 196 MPa. Microstructures and mechanical properties are examined, in connection with increasing Al₂O₃ content.     

Characterization of Hydroxyapatite Film on Titanium Substrate by Sputtering Technique

Radiofrequeut magnetron sputtering technique was used to produce calcium phosphate coated on the titurdum substrates, and the sputtered coating films were crystallized in an autoclave at 110℃ using a low temperature hydrothermal technique. The crystallization of as-sputtered coating film on the titanium substrates were amorphous calcium phosphate film. However, after the hydrothermal technique, calcium phosphate crystals grew and these were cohumnar crystal. The Ca/P ratio of sputtered coating films in 1.6 to 2.0.     

Masking model for accurate colorimetric characterization of LCD

Abstract— A color management system (CMS) such as ICC profile or sRGB space have been proposed for color transformation and reproduction of cross media. In such a CMS, accurate colorimetric characterization of a display device plays a critical role in achieving device‐independent color reproduction. In the case of a CRT, colorimetric characterization based on a GOG model is accurate enough for this purpose. However, there is no effective counterpart in liquid‐crystal displays (LCDs) since the characterization of an LCD has many difficulties, such as channel interaction and non‐constancy of channel chromaticity. In this paper, a new method of display characterization is proposed which is applicable to the assessment of color reproduction of LCDs. The proposed method characterizes an electro‐optical transfer function considering both channel interaction and non‐constancy of channel chromaticity. Experimental results show that the proposed method is very effective in the colorimetry of LCDs.     

Noninvasive blood glucose assay using a newly developed near-infrared system

This paper reports in vivo near-infrared (NIR) noninvasive blood glucose assay using dermis tissue spectra. We assume that the glucose content in dermis tissue traces the variations in blood glucose. For dermis spectra measurements, epidermis, especially stratum corneum, acts as an interference in skin tissue. Thus, we have developed a method for the selective measurement of dermis tissue spectra, enabling us to obtain better quality spectra for an accurate blood glucose assay. The selective measurement of the dermis spectra realized by using a newly developed fiber-optic probe that consists of source and detector optical fibers separated by 0.65 mm on a skin surface. The light path in the skin tissue for this geometry has been simulated by a Monte Carlo method. The simulation results show that detected light mainly interrogates dermis tissue. As the absorbance signal of glucose in human tissue is extremely small, the quality of the measured spectra is critical for the reliable assay. The present method for blood glucose assay has been applied to one Type 1 diabetic. The correlation coefficient between the blood glucose content predicted by NIR spectra and those measured by finger-prick was 0.928 and the standard error of prediction was 32.2 mg/dL. These results demonstrate the potential of our methodology for noninvasive NIR blood glucose assay.     

Combinatorial pulsed laser deposition and thermoelectricity of (La1−xCax)VO3 composition-spread films

La_1−xCa_xVO₃ composition-spread film library was fabricated by combinatorial pulsed laser deposition and their thermoelectric properties were evaluated paralelly by the multi-channel probes of Seebeck coefficient and electric conductivity. Concurrent X-ray analysis verified the formation of solid soluted films in the full composition range (0x1) as judged from the linear variation of the lattice constants. The Seebeck coefficients of La_1−xCa_xVO₃ changed from a large negative value to almost zero with the increase of x, due presumably to the variation of valence in vanadium ions.The power factor in this library was as high as 0.6 μW/cm K², which was obtained at x=0, i.e. pure LaVO₃ grown at 800 °C.     

38. R&D on hydrogen production by high-temperature electrolysis of steam

One of the objectives of the high-temperature engineering test reactor (HTTR) is to demonstrate the effectiveness of high-temperature nuclear heat utilization, which aims to extend the application of nuclear heat to non-electric fields, especially to hydrogen production. As part of the development of the hydrogen production processes, laboratory-scale experiments of a high-temperature electrolysis of steam (HTES) had been carried out with a practical electrolysis tube with 12 solid-oxide cells connected in series. Using this electrolysis tube, hydrogen was produced at the maximum density of 44 N cm³/cm² h at a electrolysis temperature of 950 °C. Thereafter, to improve hydrogen production performance, a self-supporting planar electrolysis cell with a practical size (80 mm × 80 mm of electrolysis area) was fabricated. In the preliminary electrolysis experiment carried out at 850 °C, the planar cell produced hydrogen at the maximum density of 38 N cm³/cm² h, and the energy efficiency was almost as high as that obtained with the electrolysis tube at 950 °C. However, both electrolysis tubes and planar cells did not keep their integrity in one thermal cycle. Durability of the solid-oxide cell against the thermal cycle is one of the key issues of HTES.     

TRADE‐OFF BETWEEN APPROXIMATION ACCURACY AND COMPLEXITY FOR TS FUZZY MODELS

This paper proposes a transformation method that serves the trade‐off between the modelling complexity and accuracy of multi‐variable Takagi‐Sugeno fuzzy inference operator‐based modelling (TS fuzzy modelling). The relation between the number of fuzzy rules and the modelling accuracy is defined in the paper. The proposed transformation method is capable of finding the minimal number of fuzzy rules for a given accuracy of a given TS fuzzy model. A case study, focusing on a benchmark problem of fault diagnosis, developed in the framework of EC‐founded Research Training Network DAMADICS, of an actuator in a sugar factory, is presented to provide feasibility of the proposed method.     

Effect of chitosan-gluconic acid conjugate/poly(vinyl alcohol) cryogels as wound dressing on partial-thickness wounds in diabetic rats

We previously developed chitosan cryogels from chitosan-gluconic acid conjugate without using toxic additives for wound care. In this study, we improved physiological characteristics of the previous cryogels by incorporating poly(vinyl alcohol) that also form cryogels. Mechanical strength of the cryogels was more than two times higher than that of the previous cryogels. Furthermore, the incorporation of poly(vinyl alcohol) enhanced water retention and resistance to degradation of the gels by lysozyme. The cryogels retained the favorable biological properties of the previous cryogels that they accelerate infiltration of inflammatory cells into wound sites. Time period for repairing 50 % of initial area of partial-thickness skin wound treated with the cryogels (4.0 ± 1.1 days) was shorter than those with gauze (6.5 ± 0.3 days) or a commercial hydrogel dressing (5.7 ± 0.3 days). Finally, we confirmed that incorporation of basic fibroblast growth factor into the cryogels was effective to further accelerate wound healing (2.7 ± 1.0 days). These results demonstrate that the cryogels in this study are promising for wound care.     

Three-dimensional rainbow schlieren measurements in underexpanded sonic jets from axisymmetric convergent nozzles

The rainbow schlieren deflectometry has been combined with the computed tomography to obtain three-dimensional density fields of shock containing free jets and we call the method the schlieren CT. Experiments on the schlieren CT have been performed at a nozzle pressure ratio of 4.0 by using an axisymmetric convergent nozzle with an inner diameter of 10 mm at the exit where the nozzle was operated at an underexpanded condition. Multidirectional rainbow schlieren pictures of an underexpanded sonic jet can be acquired by rotating the nozzle about its longitudinal axis in equal angular intervals and the three-dimensional density fields are reconstructed by the schlieren CT. The validity of the schlieren CT is verified by a comparison with the density fields reconstructed by the Abel inversion method. As a result, it is found that excellent quantitative agreement is reached between the three-dimensional jet density fields reconstructed from both methods.     

Degradation behavior of moduli in extruded pure magnesium during low- to giga-scale cyclic tension fatigue

The mechanical properties of extruded pure magnesium during cyclic tension fatigue in the low- to giga-scale regime at room temperature have been investigated using ultrasonic reflection methods with longitudinal and shear waves. The acoustic velocities and calculated Young’s and shear moduli decreased by a large percentage with an increase in the number of cycles in all cycle modes due to growth of grain boundary voids. The eventual degradation of the properties was largest during giga-cycle fatigue, in which the moduli decreased by ～9%. The elastic behavior depended on the drive stress and the number of cycles rather than on fatigue time. Longitudinal and shear wave propagation characteristics and investigations of a grain boundary before and after fatigue using electron backscatter diffraction based on field-emission scanning electron microscopy and focused ion beam transmission electron microscopy revealed that the largest boundary void gap width was less than several nanometers (almost closed). The Poisson’s ratio and bulk modulus were affected notably by the void gap, in which the threshold corresponds to the longitudinal wave amplitude. Other damage phase data were determined using scanning electron microscopy, Vickers hardness, and surface roughness tests under progressive fatigue; these results also indicated slight grain boundary degradation.