38—A FINITE-DEFORMATION THEORY OF THE 2/2-TWILL WEAVE UNDER BIAXIAL EXTENSION

A mechanical model of the 2/2-twill weave is presented in order to investigate the tensile properties of this weave under biaxial extension. The theory predicts that the compressional deformations of the warp and the weft at their cross-over point produce a superior effect on the tensile properties of the weave, especially in the relatively small-extension state. Experimental investigation to examine the accuracy of this theory is also reported, and good agreement between the theory and the experimental result is demonstrated.     

Layered mixed-anion compounds: Epitaxial growth,active function exploration,and device application

Optoelectronic properties and device applications of layered mixed-anion compounds such as oxychalcogenide LaCuOCh (Ch = chalcogen) and oxypnictide LaT_MOPn (T_M = 3d transition metal, Pn = pnicogen) are reviewed. Several distinctive functions have been found in these materials based on our original material exploration concept. Fabrication of high-quality epitaxial films of LaCuOCh leads to clarifying the excellent electrical and optical properties such as high hole mobility of 8 cm²/(V s) and heavy hole doping at >10²¹ cm^?3 in LaCuOSe, and sharp and tunable-wavelength photoluminescence in the solid–solution systems in LaCuOCh. In addition, a room temperature operation of a light-emitting diode is demonstrated using LaCuOSe as a light-emitting layer. These results suggest that the layered oxychalcogenides have potential for light-emitting layers as well as transparent hole-injection layers in organic/inorganic light-emitting diodes. Furthermore, by extending the material system from the copper-based oxychalcogenides to isostructural compounds, transition metal-based oxypnictides LaT_MOP (T_M = Fe, Ni), we have found novel superconductors, LaFeOP and LaNiOP.     

Experimental study on latent heat storage characteristics of W/O emulsion -Supercooling rate of dispersed water drops by direct contact heat exchange-

Recently, much attention has been paid to investigate the latent heat storage system. Using of ice heat storage system brings an equalization of electric power demand, because it will solved the electric -power-demand-concentration on day-time of summer by the air conditioning. The flowable latent heat storage material, Oil/Water type emulsion, microencapsulated latent heat material-water mixture or ice slurry, etc., is enable to transport the latent heat in a pipe. The flowable latent heat storage material can realize the pipe size reduction and system efficiency improvement. Supercooling phenomenon of the dispersed latent heat storage material in continuous phase brings the obstruction of latent heat storage. The latent heat storage rates of dispersed water drops in W/O (Water/Oil) emulsion are investigated experimentally in this study. The water drops in emulsion has the diameter within 3 ～ 25μm, the averaged water drop diameter is 7.3μm and the standard deviation is 2.9μm. The direct contact heat exchange method is chosen as the phase change rate evaluation of water drops in W/O emulsion. The supercooled temperature and the cooling rate are set as parameters of this study. The evaluation is performed by comparison between the results of this study and the past research. The obtained experimental result is shown that the 35K or more degree from melting point brings 100% latent heat storage rate of W/O emulsion. It was clarified that the supercooling rate of dispersed water particles in emulsion shows the larger value than that of the bulk water.     

The Thermal Conductivity and Thermal Diffusivity of Liquid n-Alkanes: C n H2n+2 (n=5 to 10) and Toluene

Experimental values of the thermal conductivity and the thermal diffusivity of six pure liquid n-alkanes (C _n H_2n+2; n=5 to 10) and toluene are presented in the temperature range of –20 to 70°C under atmospheric or saturation pressure. Measurements were made with the transient hot-wire method, and in the analysis, the temperatures T and T (associated with both and ) were used. In the present work, the values of thermal diffusivity were corrected by the factors k _f (=1.0076 to 0.9892) for data sets obtained with different configurations of the experiment, in which the factors were determined by reference to the thermal diffusivity of n-heptane [= _s/(c _p )_s] at 298.15 K calculated from the volumic heat capacity (c _p )_s as a reference material for heat capacity and the experimentally obtained thermal conductivity _s. The uncertainty of the data is estimated to be 0.48% for the thermal conductivity (absolutely measured) and about 1.8% for the thermal diffusivity (with a coverage factor of k _p =2; p=95%).     

Evaluation of crystallinity in TiO2 films with mixed structures grown on MgO (001) substrates by argon-ion beam sputtering based on infrared reflection-absorption spectra

TiO2 films with thicknesses (d) above 15 nm were grown on optically polished surfaces of MgO (001) substrates held at 400 degrees C by sputtering a Ti target with an argon-ion beam when the partial pressure of O2 was kept at 1.1 x 10(-2) Pa. X-ray diffraction patterns show that TiO2 films with d < 56 nm are composed of an a-axis anatase-type structure, whereas those with d > 56 nm are composed of a mixture of phases with the c-axis parallel to the film surface. The thickness dependence of the infrared reflection-absorption spectra shows that TiO2 films with d < 56 nm are composed of both anatase and amorphous phases, whereas those with d > 56 nm are composed of anatase, rutile, and amorphous phases. The crystallinity in TiO2 films is also evaluated from the infrared reflection-absorption spectra by comparison of the observed and the calculated results determined from the dielectric function of anisotropic TiO2 bulk single crystal.     

Fabrication of optics by use of plasma chemical vaporization machining with a pipe electrode

We figure optical surfaces by plasma chemical vaporization machining (CVM) with a pipe electrode, in which an rf plasma generated at the electrode tip under approximately atmospheric pressure moves over the surfaces. We propose a shaping method in which the movement of plasma on the surfaces can be determined. Flat and aspheric surfaces are successfully figured with the desired peak-to-valley shape accuracy of 0.1 microm. The root-mean-square roughness of the resultant surfaces is at the subnanometer level. These results confirm that the plasma CVM and the shaping method have the capability to fabricate optics with high accuracy.     

In vitro construction and screening of a Burkholderia cepacia lipase library using single-molecule PCR and cell-free protein synthesis

A mutant library of Burkholderia cepacia lipase KWI-56 was constructed on microplates by a cell-free process and tested with a chromogenic assay. This high-throughput construction system can be used to screen mutant proteins based on their catalytic activity.     

Analytical tool development for coarse break-up of a molten jet in a deep water pool

A computer code JASMINE-pre was developed for the prediction of premixing conditions of fuel–coolant interactions and debris bed formation behavior relevant to severe accidents of light water reactors. In JASMINE-pre code, a melt model which consists of three components of sub-models for melt jet, melt particles and melt pool, is coupled with a two-phase flow model derived from ACE-3D code developed at JAERI. The melt jet and melt pool models are one-dimensional representations of a molten core stream falling into a water pool and a continuous melt body agglomerated on the bottom, respectively. The melt particles generated by the melt jet break-up are modeled based on a Lagrangian grouped particle concept. Additionally, a simplified model pmjet was developed which considers only steady state break-up of the melt jet, cooling and settlement of particles in a stationary water pool. The FARO corium quenching experiments with a saturation temperature water pool and a subcooled water pool were simulated with JASMINE-pre and pmjet. JASMINE-pre reproduced the pressurization and fragmentation behavior observed in the experiments with a reasonable accuracy. Also, the influences of model parameters on the pressurization and fragmentation were examined. The calculation results showed a quasi-steady state phase of melt jet break-up during which the amount of molten mass contained in the premixture was kept almost constant, and the steady state molten premixed masses evaluated by JASMINE-pre and pmjet agreed well.     

基于Isabelle的证明信息系统设计

Isabelle定理证明器中的证明步骤和证明状态是非常具有参考价值的证明信息。然而目前没有工具可以有效管理这些信息。本文给出一个基于Isabelle的信息系统设计方案。利用该系统的实现,用户可以提取、保存和搜索这两种证明信息。     

Photo-Induced Effect of the Electron-Spin Resonance on the Charge-Ordered State in Pr0.65Ca0.35MnO3

Electron-spin resonance (ESR) for the charge-ordered state in well-characterized Pr_0.65Ca_0.35MnO₃ exhibited significant change of both the absorption profile and the effective spin susceptibility upon injection of laser light with photon energy of 1.17 eV provided by Nd-YAG laser. The increase of the effective spin susceptibility was clearly found out thanks to the injection of photons in the temperature range 90 K–80 K, which is below the transition temperature from the antiferromagnetic charge ordered state to the canted antiferromagnetic spin alternation state, T _CAF125 K. The temperature dependence of the change of the ESR profile excludes the possibility of heating by laser light. The present result suggests that a kind of photo-induced insulator–metal transition may occur due to propagation of the delocalized carriers via probable double exchange interaction in the charge-ordering collapsed state created by the injection of photons.