Two Triterpene Synthases from Imperata cylindrica Catalyzing the Formation of a Pair of Diastereoisomers through Boat or Chair Cyclization

Imperata cylindrica is known to produce a pair of triterpenes, isoarborinol and fernenol, that exhibit identical planar structures but possess opposite stereochemistry at six of the nine chiral centers. These differences arise from a boat or a chair cyclization of the B-ring of the substrate. Herein, we report the characterization of three OSC genes from I. cylindrica. IcOSC1 and IcOSC5 were identified as isoarborinol and fernenol synthases, respectively, while IcOSC3 was characterized as a multifunctional enzyme that produces glutinol and friedelin as its major products. Mutational studies of isoarborinol and fernenol synthases revealed that the residues surrounding the DCTAE motif partially affected the conformation of the B-ring during cyclization. Additionally, the IcOSC1-W255H mutant produced the rare triterpene boehmerol. The introduced histidine residue presumably abstracted a proton from the intermediary carbocation at C18 during the 1,2-rearrangement. Expression analysis indicated that all OSC genes were highly expressed in stems.     

Effect of weld line direction and paint orientation on corrosion and paint deterioration characteristics of welded part of steel

One thousand two hundred cycles of accelerated exposure experiment with combined salt water spray simulating atmospheric corrosion was performed for investigating the effect of weld line direction and paint orientation on the corrosion and paint deterioration characteristics of welded part of the steel. The corrosion depth of the weld toe of transverse weld line became 1.35 times as large as that of the base metal part because of the remained salt water on the weld toe. The coating thickness at the weld toe became thin by vertically painting on the transverse weld line. When the scribe line was installed at the thin painted weld toe under the transverse weld line, the paint blister area became 15% larger than that of the base metal part. The paint coating thickness at the weld toe in different weld line directions and paint orientations should be confirmed and ensured from the viewpoints of manufacturing and maintaining steel structures.     

Synthesis and hydrophilic property of polypropylene-graft-poly(polyethylene glycol-methacrylate) (PP-g-P(PEGMA))

Polypropylene-graft-poly(polyethylene glycol-methacrylate) (PP-g-P(PEGMA)), which is a hydrophobic-hydrophilic graft copolymer, was synthesized by a combination of an atom transfer radical polymerization (ATRP) of PEGMA with brominated polypropylene (PP-Br), which was synthesized from PP-OH prepared by metallocene-catalyzed copolymerization. Its structure was confirmed by ¹H NMR and GPC analyses. Transmission electron microscope (TEM) micrographs of PP-g-P(PEGMA) revealed the nanometer level microphase-separation morphology between the PP segment and the P(PEGMA) segment. The obtained PP-g-P(PEGMA) showed water-absorbing property as well as thermostability.     

Numerical prediction of fraction of eutectic phase in Sn−Ag−Cu soldring using the phase-field method

A combination of macroscale solidification simulation and phase-field calculation is employed to predict the volume fraction of the eutectic phase in Sn-4.0 mass% Ag-XCu solder alloys (X=0.5–1.1 mass%). The solidification simulation incorporates the cooling rate in the phase-field simulation. We assume the residual liquid solidifies as eutectic phase when the driving force for the nucleation of Cu₆Sn₅ amounts to a critical value, which is determined based on the experimental data. Though the calculation results depend on the experimental data, the obtained fractions are about 40% for 0.5 mass% Cu and more than 90% for 1.1 mass% Cu alloy, which shows good agreement with the experimental data.     

Microfabrication of DC microarcjets with UV lasers

Microfabrication of a microarcjet with Fifth-harmonic generation Nd:YAG pulses (wavelength 213 nm) and its plasma acceleration characteristics was investigated. The microarcjet with a rectangular exit of 0.44 mm in height was machined in a 1.2 mm thick quartz plate. For electrodes, Au films of 100 nm in thickness were coated on a divergent part of the nozzle for anode and an inner wall surface for cathode. In operational tests, a stable discharge was observed for mass flow of 1.0 mg/s, discharge current of 6 mA, discharge voltage of 600 V, or 3.6 W input power. With the 3.6 W input power, plasma speed of 1441 m/s and an energy efficiency of 7% were obtained.     

Improvement of stability for organic solar cells by using molybdenum trioxide buffer layer

We demonstrated that the stability of organic solar cells (OSCs) under light irradiation is markedly enhanced by inserting a molybdenum trioxide (MoO₃) buffer layer between an anode layer of indium tin oxide (ITO) and a p-type layer of 5,10,15,20-tetraphenylporphyrin (H₂TPP) or N,N'-di(1-naphthyl)-N,N'-diphenylbenzidine (α-NPD). The use of the MoO₃ layer also enhanced open-circuit voltages and power conversion efficiencies of the OSCs due to an increase in built-in potential. From results of stability test of hole-only α-NPD devices, we concluded that the OSC degradation occurs near the ITO/p-type layer interface and that the use of the MoO₃ layer can prevent the degradation at this interface.     

Transport of single cells using an actin bundle-myosin bionanomotor transport system

The potential of using actin bundles for the transport of liposomes and single cells across myosin-coated surfaces is investigated. Compared to that observed with filamentous actin, the liposome transport using actin bundles was more linear in nature and able to occur over longer distances. Bundles, but not filamentous actin, were capable of moving single cells. Cargo unloading from bundles was achieved by incubation with Triton X-100. These data suggest that actin bundling may improve the ability of the myosin motor system for nanotransport applications.     

Evaluation of Desulphurization Flux in CaO‐Al2O3‐BaO‐CeO2‐MgO System

The flux of the CaO‐Al₂0₃‐BaO‐CeO₂‐MgO system as a desulphurization flux containing no fluorine for the secondary metallurgy process was evaluated in this study. The flux composition was designed using the eutectic compositions of the binary systems. The melting and desulphurization abilities of the fluxes were evaluated by measuring their liquidus temperatures and the distribution ratios of sulphur between the fluxes and the carbon‐saturated iron or stainless steel. The lowest liquidus temperature of 1325°C was obtained by adding 5.7 mass% MgO to the 80mass%A‐20mass%B flux. (A: 12CaO‐7Al₂O₃, B: BaCeO₃+12mass%Al₂O₃). The distribution ratios of sulphur and sulphide capacities of the fluxes in this study were higher than those of the commercial product of calcium aluminate flux. This means that the CaO‐Al₂O₃‐BaO‐CeO₂‐MgO fluxes developed in this study have higher desulphurization and melting abilities compared with the commercial product of calcium aluminate flux.     

Application of polymerizable surfactant in the preparation of polystyrene/nano-Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> composite

Monooctadecyl maleate, as a polymerizable surfactant, was synthesized by the mono-esterification of maleic anhydride and octadecanol, and was utilized to surface-modify nano-Fe₃O₄ particles. A polymerizable magnetic fluid was obtained by directly dispersing modified nano-Fe₃O₄ particles into styrene monomer, and the polystyrene/nano-Fe₃O₄ composite was prepared through free radical polymerization of polymerizable magnetic fluid. The structure and dispersion status in different dispersion phases of modified nano-Fe₃O₄ particles were studied by Fourier transform infrared (FTIR) spectrometry, X-ray diffraction (XRD) and transmission electron microscopy (TEM), respectively. The experimental results show that the nano-Fe₃O₄ particles modified by monooctadecyl maleate with the size of about 7–10 nm can be uniformly dispersed into styrene and fixed in the composite during the procedure of polymerization. Thermogravimetric analysis (TGA) and vibrating sample magnetometry (VSM) indicate that the thermal stability of polystyrene/nano-Fe₃O₄ composite is improved compared to that of pure polystyrene, and the composite is a sort of superparamagnetic materials.