Development of silicon wafer packaging technology for deep UV LED

This paper reports a deep‐ultraviolet LED (deep‐UV‐LED) package based on silicon MEMS process technology (Si‐PKG). The package consists of a cavity formed by silicon crystalline anisotropic etching, through‐silicon vias (TSVs) filled with electroplated Cu, bonding metals made of electroplated Ni/AuSn and a quartz lid for hermetic sealing. A deep‐UV LED die is directly mounted in the Si‐PKG by AuSn eutectic bonding without a submount. It has advantages in terms of size, heat dissipation, light utilization efficiency, productivity and cost over conventional AlN ceramic packages. We confirmed a light output of 30 mW and effective reflection on Si (111) cavity slopes in the Si‐PKG. Based on simulation, further improvement of the optical output is expected by optimizing DUV‐LED die mount condition.     

Lessons from Earthquakes in Recent Times and their Effects on the Development of Geotechnology

This paper first reviews the earthquakes that occurred since 1995 and then outlines the significant lessons learnt from disasters. The discussion then goes into the induced development of engineering practices that were triggered by those disasters. It is clear that major development occurred in design philosophies, soil improvement, and facilities for research. The last section of this paper addresses the compound effects of earthquakes and rainfall that may make the extent of the disasters worse.     

Uncooled InAs0.09Sb0.91 photoconductors with cutoff wave- length extended to 11.5 μm

Uncooled InAsSb photoconductors were fabricated. The photoconductors were based on InAs0.05Sb0.95 and InAs0.09Sb0.91 thick epilayers grown on InAs substrates by melt epitaxy (ME). Ge immersion lenses were set on the photoconductors. The cutoff wavelength of InAs0.09Sb0.91 detectors is obviously extended to 11.5 mm, and that of InAs0.05Sb0.95 detectors is 8.3 mm. At room temperature, the peak detectivity of Dλp at wavelength of 6.8 mm and modulation frequency of 1 200 Hz is 1.08×109 cm.Hz1/2.W-1 for InAs0.09Sb0.91 photoconductors, the detectivity D at wavelength of 9 mm is 7.56×108 cm.Hz1/2.W-1, and that at 11 mm is 3.92×108 cm.Hz1/2.W-1. The detectivity of InAs0.09Sb0.91 detectors at the wavelengths longer than 9 mm is about one order of magnitude higher than that of InAs0.05Sb0.95 detectors, which rises from the increase of arsenic (As) composition in InAs0.09Sb0.91 materials.     

Combinatorial Measurement of CDKN1A/p21 and KIF20A Expression for Discrimination of DNA Damage-Induced Clastogenicity

In vitro mammalian cytogenetic tests detect chromosomal aberrations and are used for testing the genotoxicity of compounds. This study aimed to identify a supportive genomic biomarker could minimize the risk of misjudgments and aid appropriate decision making in genotoxicity testing. Human lymphoblastoid TK6 cells were treated with each of six DNA damage-inducing genotoxins (clastogens) or two genotoxins that do not cause DNA damage. Cells were exposed to each compound for 4 h, and gene expression was comprehensively examined using Affymetrix U133A microarrays. Toxicogenomic analysis revealed characteristic alterations in the expression of genes included in cyclin-dependent kinase inhibitor 1A (CDKN1A/p21)-centered network. The majority of genes included in this network were upregulated on treatment with DNA damage-inducing clastogens. The network, however, also included kinesin family member 20A (KIF20A) downregulated by treatment with all the DNA damage-inducing clastogens. Downregulation of KIF20A expression was successfully confirmed using additional DNA damage-inducing clastogens. Our analysis also demonstrated that nucleic acid constituents falsely downregulated the expression of KIF20A, possibly via p16 activation, independently of the CDKN1A signaling pathway. Our results indicate the potential of KIF20A as a supportive biomarker for clastogenicity judgment and possible mechanisms involved in KIF20A downregulation in DNA damage and non-DNA damage signaling networks.     

Chemical reaction kinetics dataset of Cs-I-B-Mo-O-H system for evaluation of fission product chemistry under LWR severe accident conditions

In order to improve LWR source term under severe accident conditions, the first version of a fission product chemistry database named ‘ECUME’ was developed. The ECUME is intended to include several datasets of major chemical reactions and their effective kinetic constants for representative severe accident sequences. It is expected that the ECUME can serve as a fundamental basis from which fission product chemical models can be elaborated for use in the severe accident analysis codes. The implemented chemical reactions in the first version were those for representative gas species in Cs-I-B-Mo-O-H system from 300 to 3000 K. The chemical reaction kinetic constants were evaluated from either literature data or calculated values using ab-initio calculations. The sample chemical reaction calculation using the presently constructed dataset showed meaningful kinetics effects at 1000 K. Comparison of the chemical equilibrium compositions by using the dataset with those by chemical equilibrium calculations has shown rather good consistency for the representative Cs-I-B-Mo-O-H species. From these results, it was concluded that the present dataset should be useful to evaluate fission product chemistry in Cs-I-B-Mo-O-H system under LWR severe accident conditions, where kinetics effects should be considered.     

Comparative immunohistological study on using capsaicin,piperine, and okadaic acid for the transepithelial passage of the inactivated viral and bacterial vaccines in fish

The practical difficulty of parenteral application of fish vaccines against devastating fish diseases diverted the interest toward oral vaccination. Search for effective methods to enhance the oral uptake of viral and bacterial vaccines is continuing. The current research focus on a new role of mucosal fish vaccine adjuvants inducing the antigen uptake by enhancing vascularity or increasing intestinal permeability. Some inflammatory substances cause reversible pathology to the intestinal epithelium, which could be employed for the transepithelial passage of vaccine particles. The natural inflammatory substances used were capsaicin, piperine, and okadaic acid as 1 mg, 2 mg, and 1 μg/fish, respectively. Two inactivated vaccines were used as antigens to test the effect of these inflammatory substances in two different fish hosts. Tested vaccines were inactivated redspotted grouper nervous necrosis virus vaccine in sevenband grouper (Epinephelus septemfasciatus) and inactivated Edwardsiella tarda vaccine in red sea bream (Pagrus major) fish models. The inflammatory substances and each vaccine were anally intubated to fish. Capsaicin proved to be effectively aiding the transepithelial passage of vaccine particles more than piperine, while okadaic acid had no detectable effect.     

Effects of Thermal History and Microstructure on Segregation of Phosphorus and Alloying Elements in the Heat-Affected Zone of a Low Alloy Steel

The grain boundary segregation of phosphorus and alloying elements in the heat-affected zone (HAZ) of a low alloy steel was studied quantitatively with atom probe tomography. Non-equilibrium segregation mainly occurred during welding and subsequent fast cooling, leading to remarkable segregation of P, C, Mn, and Mo. The segregation of these four types of solutes showed similar microstructure-dependence at this stage, in which the segregation levels are higher in coarse-grained HAZ and intercritically reheated coarse-grained HAZ than in fine-grained HAZ. After simulated aging, P and Mn showed further enrichment at grain boundaries through equilibrium segregation, while desegregation was observed for C and Mo. In addition, it seems that precipitation of Mo at dislocations was greatly promoted during aging, which probably also contributed to the increase of P and Mn at grain boundaries.