Contents of barbaloin-related compounds in aloe drinks and their change during storage

The contents of barbaloin (BA), isoBA, aloin-dimers A, B, C, D and aloe-emodin (AE) in aloe drinks were investigated. BA and isoBA were detected in 30 of the 31 samples at the levels of 120-570 micrograms/mL and 120-580 micrograms/mL, respectively. Aloin-dimers A, B, C and D were detected in 8 of the 31 samples at the levels of 12-38 micrograms/mL, 13-39 micrograms/mL, 11-36 micrograms/mL and 16-69 micrograms/mL, respectively. AE was detected in all of the 31 samples at the levels of 0.03-1.3 micrograms/mL. When aloe drinks were stored for 4 weeks at 5 degrees C after opening the bottle, decrease of BA and isoBA, and increase of AE and aloin-dimers A, B, C and D were observed in most cases. However, in a few aloe drinks, all of BA, isoBA, aloin-dimers A, B, C, D and AE decreased. In these drinks, the existence of aloin-trimer was elucidated by LC/MS analyses. These data suggested that BA in aloe drinks is converted to the dimer and then to the trimer during storage.     

日本彩色聚乙烯涂覆钢管的开发

试验了彩色聚乙烯涂覆钢管的耐腐蚀性和耐气候性，由于聚乙烯涂层隔绝水的作用，聚乙烯涂覆钢管具有优良的耐腐蚀性能，电阻绝缘值和优良的机械性能。建立了一个新的方式去研究分析聚乙烯抗老化剂消耗和在聚乙烯中的扩散。用有效测定的方法定量地预测彩色聚乙烯涂覆层的寿命，应用这些分析结果，不仅可使新的有色聚乙烯涂覆钢管在恶劣腐蚀环境介质情况下具有高的耐腐蚀性，而且有长的耐气候性。     

Static Coarse Grain Task Scheduling with Cache Optimization Using OpenMP

Effective use of cache memory is getting more important with increasing gap between the processor speed and memory access speed. Also, use of multigrain parallelism is getting more important to improve effective performance beyond the limitation of loop iteration level parallelism. Considering these factors, this paper proposes a coarse grain task static scheduling scheme considering cache optimization. The proposed scheme schedules coarse grain tasks to threads so that shared data among coarse grain tasks can be passed via cache after task and data decomposition considering cache size at compile time. It is implemented on OSCAR Fortran multigrain parallelizing compiler and evaluated on Sun Ultra80 four-processor SMP workstation using Swim and Tomcatv from the SPEC fp 95. As the results, the proposed scheme gives us 4.56 times speedup for Swim and 2.37 times on 4 processors for Tomcatv respectively against the Sun Forte HPC Ver. 6 update 1 loop parallelizing compiler.     

Porcine hemoglobin promotes lipid excretion to feces more strongly than globin protein in rats

In an effort to clarify whether the lipid-lowering effect of hemoglobin is due to globin protein or heme, this study investigated the effects of dietary porcine hemoglobin (PH) and porcine globin (PG) on lipids contents of serum, liver, and feces in rats. Five-week-old male Wistar rats were divided into 3 dietary groups of 7 rats each, with one group receiving a control diet and the other groups receiving diets containing 1.25% (w/w) PH or 1.18% (w/w) PG for 4 weeks. The PH diet decreased triacylglycerol content in serum and cholesterol in serum and liver, whereas the PG diet reduced triacylglycerol content in serum and cholesterol in liver. Fecal lipid excretion in the PH group was significantly higher than in the PG group. Therefore, PH affected lipid excretion to feces due to globin protein as well as heme.     

Electrospray Deposition of Photoresist: A Low Impact Method for the Fabrication of Multilayered Films

Electrospray deposition has been investigated as a substitute for photoresist spin coating. The morphology of Microposit S1813 photoresist films has been studied as a function of several spray conditions including resist concentration, substrate surface, and flow rate. Film morphology is controlled by three process parameters: the surface energy determines the equilibrium conditions of resist on the substrate; the viscosity and volume flux determine the relaxation time for the depositing resist solution after impact on the substrate. Electrosprayed photoresist films have been used for photolithographic patterning and it has been demonstrated that electrospray deposition is an effective method for deposition of photoresist on top of fragile, thin films, which can be used for multilayered thin film fabrication.

     

A New Neutral-Point-Clamped PWM Inverter

A new neutral-point-clamped pulsewidth modulation (PWM) inverter composed of main switching devices which operate as switches for PWM and auxiliary switching devices to clamp the output terminal potential to the neutral point potential has been developed. This inverter output contains less harmonic content as compared with that of a conventional type. Two inverters are compared analytically and experimentally. In addition, a new PWM technique suitable for an ac drive system is applied to this inverter. The neutral-point-clamped PWM inverter adopting the new PWM technique shows an excellent drive system efficiency, including motor efficiency, and is appropriate for a wide-range variable-speed drive system.     

Polarization-Insensitive Monolithic 40-Gbps SOA–MZI Wavelength Converter With Narrow Active Waveguides

A polarization-insensitive monolithic 40-Gbps semiconductor optical amplifier (SOA)-Mach-Zehnder interferometer wavelength converter has been developed. Based on the photon-electron rate equation, we optimized the dimensions of the waveguide structure to maximize the field confinement in the active layer. An InGaAsP active layer with narrow SOA waveguide effectively enables polarization-insensitive high-speed wavelength conversion. High-precision wafer processing technique enabled the fabrication of submicrometer-wide active waveguides with low current leakage. Input waveguide arrays were fabricated at intervals of 25 mum and mounted in a module with two-lens aspherical lens optics. The 40-Gbps nonreturn-to-zero wavelength conversion experiment demonstrates a clear eye opening over full C-band operation     

Development of silicon wafer packaging technology for deep UV LED

This paper reports a deep‐ultraviolet LED (deep‐UV‐LED) package based on silicon MEMS process technology (Si‐PKG). The package consists of a cavity formed by silicon crystalline anisotropic etching, through‐silicon vias (TSVs) filled with electroplated Cu, bonding metals made of electroplated Ni/AuSn and a quartz lid for hermetic sealing. A deep‐UV LED die is directly mounted in the Si‐PKG by AuSn eutectic bonding without a submount. It has advantages in terms of size, heat dissipation, light utilization efficiency, productivity and cost over conventional AlN ceramic packages. We confirmed a light output of 30 mW and effective reflection on Si (111) cavity slopes in the Si‐PKG. Based on simulation, further improvement of the optical output is expected by optimizing DUV‐LED die mount condition.     

Accurate and efficient RTL power estimation based on power contour model

This paper proposes a new RTL power estimation method based on a power contour model. The model achieves accurate and efficient power estimation. The experimental results show that the maximum error is reduced by 56.19% and the RMS error is also reduced by 3.41% compared to the conventional table‐based RTL power estimation. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 182(3): 48–56, 2013; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22340     

Preparation of SrBi 2 Ta 2 O 9 Thin Films by Liquid-Delivery MOCVD Without Additional Solvents

SrBi 2 Ta 2 O 9 thin films were prepared by ECR plasma enhanced metalorganic chemical vapor deposition (ECR-MOCVD) with a liquid-delivery system using one cocktail source without an additional solvent. The strontium-tantalum double alkoxide, Sr{Ta[OC 2 H 4 H(CH 3 ) 2 ](OC 2 H 5 ) 5 } 2 , was dissolved in stabilized trimethyl bismuth, Bi(CH 3 ) 3 / dioxane. This source system has been used in a conventional bubbling system. Deposition rate and the composition of the films were strictly controlled by the concentration and the composition of the cocktail source. Therefore, high reproducibility was realized by using this system. The constituent phase of the stoichiometric SBT film as-deposited at 500 C on a (111)Pt/TiO 2 /SiO 2 /Si substrate was a fluorite phase and transformed to the single phase of SBT by the post annealing at 800 C. It showed almost the same ferroelectricity as the stoichiometric composition film.