东京电力公司采用特高压输电技术的论证经过

东京电力公司(Tokyo Electric Power Company,TEPCO)在20世纪90年代建成了1000kV南北输电线路和1000kV东西输电线路.文中介绍了日本选择特高压输电技术的经过和TEPCO采用特高压输电的必要性,指出了选择特高压交流最高运行电压时应考虑的因素;还对交流输电方式和直流输电方式进行了比较,分析了直流输电方式存在的问题,说明了TEPCO在特高压输电中采用交流输电方式的原因.对中国发展特高压输电有一定的借鉴意义.     

MOCVD preparation of SBTN thin films from two organometallic sources bottles

Abstract

SrBi₂(Ta_0.7Nb_0.3)₂O₉ (SBTN) films were first prepared on (111)Pt/Ti/SiO₂/Si substrates by MOCVD from only two organometallic source bottles. Bi(CH₃)₃ and the mixture of Sr[Ta(O°C₂H₅)₆]₂ and Sr[Nb(O°C₂H₅)₆]₂ were used as source materials. High compositional reproducibility was obtained; the Nb/(Ta+Nb) ratio was the same as the mixing ratio of the source. Sr/(Ta+Nb) and Bi/(Ta+Nb) ratios can be controlled by the reactor pressure and the input gas flow rate ratio of the source gases. Almost single phase of SBTN was obtained for the film deposited at 500°C and the following heat-treated at 800°C in O₂ atmosphere. Pr and Ec values of 330 nm-thick SBTN film were 8.5 μC/cm² and 91 kV/cm, respectively and were larger than those of SrBi₂Ta₂O₉ film. There was no degradation after 5x10¹⁰ cycles polarization switching.     

Fabrication of heterostructures of halogen-bridged quasi-one-dimensional mixed-valence transition metal complexes

Single-heterostructure crystals of a series of halogen-bridged quasi-one- dimensional mixed-valence transition metal complexes (HMMCs) were fabricated by selective coordination epitaxial growth (SCE growth). The overgrowth crystals of the HMMC were grown on the columnar crystals of the substrate HMMC in solution. The single-heterostructure crystals were epitaxially grown only when the two HMMCs had similar crystal structures. If their crystal structures were different, no heterostructure crystal was grown. This result suggests that the degree of mismatch between the crystal structures of the substrate and the overgrowth is the predominant factor which determines the SCE growth of the HMMCs.     

Damage evolution behavior of CFRP laminates under post-impact fatigue with water absorption environment

In this study, the damage evolution behavior was evaluated considering the effect of the textile structure and water absorption. Damage observation was conducted by the integration of non-destructive and direct observation methods. Candidate textile reinforcements were T300-3k plain woven fabric (PW) and T700S-12k multi-axial knitted fabric (MA). The effect of water absorption on the performances of compression after impact (CAI) and PIF were small in PW CFRP laminates. Conversely, PIF properties of water-absorbed MA CFRP laminates drastically decreased than that of dry ones. CAI strength was not affected by water absorption. PIF performance of dry MA CFRP was fairly higher than that of the others. From the precise observation, some evidences of interfacial deterioration caused by water absorption were confirmed in both PW and MA CFRP laminates.     

A versatile planar QCM-based sensor design for nonlabeling biomolecule detection

Despite high theoretical sensitivity, low-cost manufacture, and compactness potentially amenable to lab-on-a-chip use, practical hurdles have stymied the application of the quartz crystal microbalance (QCM) for aqueous applications such as detection of biomolecular interactions. The chief difficulty lies in achieving a sufficiently stable resonance signal in the presence of even minute fluctuations in hydrostatic pressure. In this work, we present a novel versatile planar sensor chip design (QCM chip) for a microliter-scale on-line biosensor. By sealing the quartz resonator along its edges to a flat, solid support, we provide uniform support for the crystal face not exposed to solvent, greatly decreasing deformation of the crystal resonator under hydrostatic pressure. Furthermore, this cassette design obviates the need for direct handling when exchanging the delicate quartz crystal in the flow cell. A prototype 27-MHz sensor signal exhibited very low noise over a range of flow rates up to 100 microL/min. In contrast, signals obtained from a conventional QCM sensor employing an O-ring-based holder were less stable and deteriorated even further with increasing flow rate. Additional control designs with intermediate amounts of unsupported undersurface yielded intermediate levels of stability, consistent with the interpretation that deformation of the crystal resonator under fluctuating hydraulic pressure is the chief source of noise. As a practical demonstration of the design's high effective sensitivity, we readily detected interaction between myoglobin and surface-bound antibody.     

Uterine Deletion of Bmal1 Impairs Placental Vascularization and Induces Intrauterine Fetal Death in Mice

Recently, it was demonstrated that the expression of BMAL1 was decreased in the endometrium of women suffering from recurrent spontaneous abortion. To investigate the pathological roles of uterine clock genes during pregnancy, we produced conditional deletion of uterine Bmal1 (cKO) mice and found that cKO mice could receive embryo implantation but not sustain pregnancy. Gene ontology analysis of microarray suggested that uterine NK (uNK) cell function was suppressed in cKO mice. Histological examination revealed the poor formation of maternal vascular spaces in the placenta. In contrast to WT mice, uNK cells in the spongiotrophoblast layer, where maternal uNK cells are directly in contact with fetal trophoblast, hardly expressed an immunosuppressive NK marker, CD161, in cKO mice. By progesterone supplementation, pregnancy could be sustained until the end of pregnancy in some cKO mice. Although this treatment did not improve the structural abnormalities of the placenta, it recruited CD161-positive NK cells into the spongiotrophoblast layer in cKO mice. These findings indicate that the uterine clock system may be critical for pregnancy maintenance after embryo implantation.     

A Technique to Eliminate Redundant Inter-Processor Communication on Parallelizing Compiler TINPAR

Optimizing inter-processor (PE) communication is crucial for parallelizing compilers for message-passing parallel machines to achieve high performance. In this paper, we propose a technique to eliminate redundant inter-PE messages. This technique utilizes data-flow analysis to find a definition point that corresponds to a use point where the definition and the use occur in different PEs. If several read accesses occurred in the same PE use the data defined at the same definition point in another PE, redundant inter-PE messages are eliminated as follows: only one inter-PE communication is performed for the earliest read access and the previously received data are used for the following read. In order to guarantee the consistency of the data, a valid flag and a sent flag are provided for each chunk of received data. The control of these flags is equivalent to the coherence control by the self invalidation on a compiler aided cache coherence scheme.     

Assistant force compensation for hand movement of patients by using exogenous signals and/or neurophysiological signals

Because functional diseases of the brain can cause disabilities related to human movement control, a compensation method was developed for improving the performance of hand movements. The compensation for human hand movements can be carried out by adding an assistant force that is generated from artificial equipment attached to a human arm. From the experiment on visual target tracking, it was found that the tracking trajectory was adequately represented by a dynamic model of the motion of an articulated industrial robot arm, and the different abilities for movement control among healthy people and patients were classified by different model parameters as position loop gain, velocity loop gain, and response delay. Dynamic force compensation was approached by considering the different control features of the patients. The effectiveness of the proposed compensation method was verified in a simulation study on an actual industrial robot arm. A human-machine interface, e.g., a brain-computer interface (BCI), for realizing the control of artificial equipment to compensate for human hand movements is also presented and discussed.     

Back‐channel‐etched thin‐film transistor using c‐axis‐aligned crystal In–Ga–Zn oxide

Our crystalline In–Ga–Zn oxide (IGZO) thin film has a c‐axis‐aligned crystal (CAAC) structure and maintains crystallinity even on an amorphous base layer. Although the crystal has c‐axis alignment, its a‐axis and b‐axis have random arrangement; moreover, a clear grain boundary is not observed. We fabricated a back‐channel‐etched thin‐film transistor (TFT) using the CAAC‐IGZO film. Using the CAAC‐IGZO film, more stable TFT characteristics, even with a short channel length, can be obtained, and the instability of the back channel, which is one of the biggest problems of IGZO TFTs, is solved. As a result, we improved the process of manufacturing back‐channel‐etched TFTs.