Ultra-shallow p-junction formation in silicon by excimer laser doping: a heat and mass transfer perspective

Heat and mass transfer at the nanosecond time scale and the nanometer length scale in pulsed laser fabrication of ultra-shallow p⁺-junctions is studied in this work. A new technique is developed to fabricate the ultra-shallow p⁺-junctions with pulsed laser doping of crystalline silicon with a solid spin-on-glass (SOG) dopant, through the nanosecond pulsed laser heating, melting, and boron mass diffusion in the 100 nm thin silicon layer close to the surface. High boron concentration of 10²⁰ atoms cc⁻¹ and the ‘box-like’ junction profile are achieved. The key mechanism determining the ‘box-like’ junction shape is found to be the melt-solid interface limited diffusion. The ultra-shallow p⁺-junctions with the depth from 30 to 400 nm are successfully made by the excimer laser. The optimal laser fluence condition for SOG doping is found about 0.6–0.8 J cm⁻² by studying the ultra-shallow p⁺-junction boron profiles measured by the secondary ion mass spectroscopy (SIMS) vs the laser fluence and the pulse number. The one-dimensional numerical analysis agrees reasonably with the experiment, within the available physical picture. Possible mechanisms such as boron diffusivity dependence on the dopant concentration in the molten silicon are proposed.     

Exceptional convergent evolution in a virus

Replicate lineages of the bacteriophage phiX 174 adapted to growth at high temperature on either of two hosts exhibited high rates of identical, independent substitutions. Typically, a dozen or more substitutions accumulated in the 5.4-kilobase genome during propagation. Across the entire data set of nine lineages, 119 independent substitutions occurred at 68 nucleotide sites. Over half of these substitutions, accounting for one third of the sites, were identical with substitutions in other lineages. Some convergent substitutions were specific to the host used for phage propagation, but others occurred across both hosts. Continued adaptation of an evolved phage at high temperature, but on the other host, led to additional changes that included reversions of previous substitutions. Phylogenetic reconstruction using the complete genome sequence not only failed to recover the correct evolutionary history because of these convergent changes, but the true history was rejected as being a significantly inferior fit to the data. Replicate lineages subjected to similar environmental challenges showed similar rates of substitution and similar rates of fitness improvement across corresponding times of adaptation. Substitution rates and fitness improvements were higher during the initial period of adaptation than during a later period, except when the host was changed.     

A comprehensive approach to the solution of direct-coupledmultislice model of skewed rotor induction motors using time-steppingeddy-current finite element method

Normally a complicated three-dimensional (3-D) approach is needed to study the field pattern of induction machines with skewed rotor bars. In this paper, a time-stepping two-dimensional (2-D) eddy-current finite element method, based on multislice technique, is described to study the steady-state operation and the starting process of skewed rotor induction machines. The fields of the multislices are being solved en bloc simultaneously, and thus, the effects of the eddy current and saturation can be taken into account directly. New forms of the governing equations for the multislice model are derived, which allow the meshes of multislices to be taken as one 2-D mesh so that the algorithm is very similar to that of general 2-D problems. Special techniques required for the mesh generation in the multislice model and the salient structures of the software are also described. The results obtained by using the program being developed have very good correlation with test data     

Extraction of halide quaternary salts in an organic solvent/water system: Hydrodynamics and mass transfer

The hydrodynamic characteristics and mass transfers of halide quaternary salts between two immiscible phases in a stirred membrane permeation cell were investigated. The concentration of quaternary salt, temperature, solvent and the four kinds of halide quaternary salts were evaluated to achieve the extractive optimum condition. The diffusivity, overall mass‐transfer coefficients and individual mass‐transfer coefficients were determined and correlated in terms of the conventional Sh‐Re‐Sc relationship. The transfer time of quaternary salts across the membrane and the thickness of the hydrodynamic diffusion boundary layer were determined as well, so as to characterize the extractive phenomenon of quaternary salts between the two phases that is useful in phase‐transfer catalysis.     

Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

Complement resistance of capsulated strains of Aeromonas salmonicida

1. We investigated the effect of exercise on plasma adrenomedullin, atrial natriuretic peptide (ANP) and brain natriuretic peptide (BNP) concentrations and studied the relationship between these peptides and haemodynamic parameters in nine patients with old myocardial infarction (MI) and in eight normal subjects. 2. The exercise protocol consisted of two fixed work loads (40 and 80 W) for 4 min each and venous blood samples were taken at rest, during each exercise stage and after exercise while monitoring the mean arterial pressure (MAP) and heart rate (HR). In MI, pulmonary arterial pressure (PAP), pulmonary capillary wedge pressure (PCWP), left ventricular end-diastolic pressure (LVEDP) and cardiac output (CO) were measured throughout exercise. 3. Adrenomedullin levels did not significantly increase with exercise. Adrenomedullin levels correlated with PAP and PCWP at rest (P < 0.05). Atrial natriuretic peptide levels correlated with PAP, PCWP and LVEDP throughout exercise (P < 0.05) but, on multiple regression analysis, PCWP correlated only with ANP (P < 0.01). Brain natriuretic peptide levels correlated with LVEDP throughout exercise (P < 0.01) and its increment correlated closely with basal BNP levels at rest (P < 0.01). 4. These results suggest that adrenomedullin does not respond to the acute haemodynamic changes of exercise, whereas ANP responds to it and PCWP is the major stimulus factor. Brain natriuretic peptide responds to exercise in proportion to the basal synthesis of BNP in patients with left ventricular dysfunction and LVEDP may play a role in increasing BNP during exercise.     

When is the shape of a scene unique given its light-field: a fundamental theorem of 3D vision?

The complete set of measurements that could ever be used by a passive 3D vision algorithm is the plenoptic function or light-field. We give a concise characterization of when the light-field of a Lambertian scene uniquely determines its shape and, conversely, when the shape is inherently ambiguous. In particular, we show that stereo computed from the light-field is ambiguous if and only if the scene is radiating light of a constant intensity (and color, etc.) over an extended region.     

Capacity and power control for CDMA microcells

Capacity and power control issues are considered for urban CDMA microcells that operate on channels characterized by log-normal shadowing and Nakagami fading. The effects of fading on the desired and interfering signals, variations in the shadow standard deviation, imperfect power control, and the requiredE _b /N _o for satisfactory link operation are investigated. It is shown that the reverse channel is relatively insensitive, and the forward channel very sensitive, to shadow and fading variations. Power control error is shown to significantly degrade reverse channel capacity. Twobiased forward channel power control strategies are introduced to enhance existing unbiasedbalancing forward channel power control algorithms.This research has been supported by BNR Inc.