La<Subscript>1−x</Subscript>Ag<Subscript>x</Subscript>FeO<Subscript>3</Subscript>/halloysites nanocomposite with enhanced visible light photocatalytic performance

La_1?xAg_xFeO₃/halloysites nanotubes (HNTs) nanocomposite was synthesized by sol–gel method. It was characterized by X-ray diffraction, transmission electron microscope, Fourier transform infrared spectroscopy and UV–visible diffused reflectance spectroscopy measurements. The photo-activity of the La_1?xAg_xFeO₃/HNTs nanocomposite was evaluated via degradation of methylene blue (MB) under visible-light irradiation. The results showed that the HNTs with unique pore structure favored the adsorption of organic molecules. Adequate Ag⁺ doping improved the absorption ability for visible light. The La_0.95Ag_0.05FeO₃/HNTs demonstrated the best photocatalytic performance, which achieved as high as 99 % for MB degradation exposed 2 h irradiation. However,further increasing of Ag⁺ doping gradually reduced the photocatalytic activity. The nanocomposite catalyst showed outstanding recyclability after eight cycles which still remained up to 90 %.     

Methylene blue photocatalytic degradation under visible irradiation of Al doped ZnO powders by hydrothermal synthesis sensitized with octa-iso-pentyloxyphthalocyanine lead

AZO powders were sensitized through chemisorption method by octa-iso-pentyloxy phthalocyanine lead and characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The results showed that after sensitization process AZO photo physical properties improved greatly in visible regions. Photocatalytic degradation of methylene blue was studied under visible irradiation in aqueous solution and the pseudo first order model was used to obtain kinetic information of the photocatalytic degradation. The results indicated that photocatalytic activities of PbPc(iso-PeO)₈-AZO were better than of AZO powders.     

高效能空气净化器评价技术要求国家标准研究

本文论述了编制高效能空气净化器产品评价技术要求国家标准的意义和作用,介绍了标准研制的总体思路和原则,高效能空气净化器的定性和定量评价指标要求,测试、计算和评价方法等,通过国标的研制与实施,将引领并促进高效能空气净化器产品的生产与应用.     

气相色谱仪新旧检定规程的解读

本文主要从规程适用范围、计量器具控制、计量性能要求及检定方法等方面入手,全面的解读了气相色谱仪新旧检定规程的差异,为仪器检定及期间核查提供了参考。     

A Two‐Stage Annealing Strategy for Crystallization Control of CH3NH3PbI3 Films toward Highly Reproducible Perovskite Solar Cells

The solvent‐engineering method is widely used to fabricate top‐performing perovskite solar cells, which, however, usually exhibit inferior reproducibility. Herein, a two‐stage annealing (TSA) strategy is demonstrated for processing of perovskite films, namely, annealing the intermediate phase at 60 °C for the first stage then at 100 °C for the second stage. Compared to conventional direct annealing temperature (DHA) at 100 °C, using this strategy, MAPbI₃ films become more controllable, leading to superior film uniformity and device reproducibility with the champion device efficiency reaching 19.8%. More specifically, the coefficient of variation of efficiency for 49 cells is reduced to 5.9%, compared to 9.8% for that using DHA. The TSA process is carefully studied using Fourier transform infrared spectroscopy, X‐ray diffraction, and UV–vis absorption spectroscopy. It is found that in comparison with DHA the formation of hydrogen bonding and crystallization of perovskite are much slower and can be better controlled when using TSA. The improvements in film uniformity and device reproducibility are attributed to: 1) controllable MAPbI₃ crystal growth stemming from the progressive formation of hydrogen bonding between methylammonium and halide; 2) suppression of intermediate phase film dewetting, which is believed to be due to its decreased mobility at the initial low‐temperature annealing stage.     

Large capacitance and fast polarization response of thin electrolyte dielectrics by spin coating for two-dimensional MoS2 devices

Nano Research - A spin-coating method was applied to obtain thinner and smoother PEO/LiClO4 polymer electrolyte films (EFs) with a lower level of crystallization than those obtained using a...     

Peptidyl Virus-Like Nanovesicles as Reconfigurable “Trojan Horse” for Targeted siRNA Delivery and Synergistic Inhibition of Cancer Cells

The self-assembly of peptidyl virus-like nanovesicles (pVLNs) composed of highly ordered peptide bilayer membranes that encapsulate the small interfering RNA (siRNA) is reported. The targeting and enzyme-responsive sequences on the bilayer's surface allow the pVLNs to enter cancer cells with high efficiency and control the release of genetic drugs in response to the subcellular environment. By transforming its structure in response to the highly expressed enzyme matrix metalloproteinase 7 (MMP-7) in cancer cells, it helps the siRNA escape from the lysosomes, resulting in a final silencing efficiency of 92%. Moreover, the pVLNs can serve as reconfigurable “Trojan horse” by transforming into membranes triggered by the MMP-7 and disrupting the cytoplasmic structure, thereby achieving synergistic anticancer effects and 96% cancer cell mortality with little damage to normal cells. The pVLNs benefit from their biocompatibility, targeting, and enzyme responsiveness, making them a promising platform for gene therapy and anticancer therapy.