Drittes Wissenschaftshistorikertreffen in Brdo

Ohne Zusammenfassung     

BN0.5O0.4C0.1: Carbon- and oxygen-substituted hexagonal BN

Hexagonal boron nitride (hex BN) containing significant amounts of C and O substituting for N (hex BCNO) was synthesized at 75 kbar and 1700°C from mixtures of C, B₂O₃, and amorphous B contained in a hex BN crucible. Hex BCNO is a minor constituent of the product and occurs as small, <30 nm diameter, rounded pseudohexagonal particles adhering to materials with the α-rhombohedral B structure. Electron energy-loss spectroscopy with a transmission electron microscope was used to quantify their elemental ratios. Up to 50% of the N in hex BN is replaced by C and O, e.g., BN_0.49O_0.38C_0.11. The electron energy-loss near-edge fine structure of the core-loss edges was used to elucidate the possible structures of hex BCNO. The core-loss edges of B, C, N, and O exhibit orientation-dependent intensity changes, which indicates that they occupy similar anisotropic bonding sites in graphite-like BCNO layers. For a composition of BN_0.5O_0.4C_0.1, regions with B–N₃, B–N₂O, and B–NO₂ units predominate. In addition, some grains have significant quantities of B–O₃ and B–C₃ units. Boron–boron bonding is either absent or infrequent.     

Modelling the effect of material properties and process parameters on tow impregnation in out-of-autoclave prepregs

Out-of-autoclave prepregs based on woven fabrics initially consist of dry tows and resin-rich areas. The tows allow air evacuation in the initial stages of processing and are subsequently infiltrated by surrounding matrix. The following study analyzes the relationship between material properties, process parameters and tow impregnation for three OOA prepregs. First, a representative model for tow impregnation is developed. Then, the model parameters are determined and the model predictions are correlated to impregnation data measured by X-ray microtomography. Finally, the model is used in a parametric study to investigate the effect of fibre architecture, cure cycle temperature and resin initial degree of cure on tow impregnation rate and to predict the possible occurrence of flow-induced micro-voids.     

Active-amplifier-array diagnostics using high-resolutionelectrooptic field mapping

Several Ka-band spatial-amplifier power combiners and their free-space feeds were characterized using a high-resolution extreme-near-field electrooptic measurement technique. The two-dimensional electric-field amplitude and phase maps obtained from several arrays are presented. The usefulness of the technique for diagnostic purposes during the design and prototyping stages of the active arrays is discussed. In particular, the electrooptic maps were shown to be valuable for making improvements in the bias line design in one case, and for isolating faulty unit cells in another case     

The Electrodeposition of Chromium from Tervalent Chromium Salt Solutions. Part I. Chromium Chloride and Chromium Sulphate Baths

The “imponderables” which affect the framework within which the Plating Shop must be planned are listed. The grouping of vats, cleaners and rinses are discussed and alternative methods of hand operation of plating vats described. The importance of depth of plating vats is stressed and various methods of constructing floors, drainage and vat supports are briefly indicated. Layouts for barrel plating shops both with inclined and horizontal barrels are suggested, and the importance of correct housing for electrical and other ancillary plant is emphasised.     

Evidence by EIS of the interaction between proteins and tin oxide electrode surface

Macromolecules like proteins are able to adhere to tin oxide electrodes at open circuit potential as proved by electrogravimetry experiments. In this work, electrochemical impedance studies were performed at aqueous electrolyte/F- or Sb-doped semiconducting tin oxide interfaces, including natural seawater. By this way, it was possible to characterize the potential dependence of the interfacial capacitance in various physicochemical conditions, without or in the presence of bovine serum albumin (BSA). In the potential range where tin oxide is in the depletion regime (blocking interface), a capacitance excess is evidenced which can be attributed to the formation of surface states which are the signature of chemical bonding. By simulating the so-called surface state capacitance, three states have been pointed out. They are centred at 0.7, 0.9 and 1.1 eV in the tin oxide bandgap. On the basis of experimental arguments, the state at 1.1 eV was ascribed to the OH-terminated tin oxide surface, the two other states were found to be specific of the interaction of organic matter with the oxide surface. In the presence of BSA, the density of surface atoms (about 10¹³ cm⁻²) involved in bonding is of the order of magnitude of the surface concentration of one BSA monolayer. The lasting character of these bonds was also shown. This finding shows the definitive protein immobilisation at the SnO₂ surface.     

Die Welt ist keine Scheibe

The world is not flat: from field ion microscopy to atom probe tomography Atom probe tomography has gained considerable importance in the past couple of years due to the steadily increasing demands on the capabilities of analytical tools for nanotechnology. Presently available preparation and instrumental methods allow the application of atom probe tomography also for technically relevant specimens. This affords a unique analytical approach for a quantitative and highly sensitive characterization of the chemical content of materials; by combining these features with the three dimensional registration of the elemental distributions, atomic spatial resolution can be achieved both laterally and in‐depth. For this reason, atom probe tomography is very well suited for the determination of the composition and morphology of crystalline and amorphous materials and nanostructures, and may have an enormous impact on research and development in various areas of material sciences. The first part of this contribution on modern atom probe tomography illustrates the evolution of the technique from its beginnings in the 1950s to the presently available commercial instruments. In the course of this overview, the basic physical and instrumental concepts will briefly be outlined. The second part will concentrate on the presentation of selected, current applications; these examples will serve also to emphasize some of the limitations of atom probe tomography.     

Undular Tidal Bores: Basic Theory and Free-Surface Characteristics

The present study examines the free-surface properties of undular tidal bores observed for 1相似文献