Simulation of polarization converter formed by poling-inducedpolymer waveguides

A polarization converter using electrooptic (EO) polymer waveguides is proposed and it is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. First, an efficient structure of poling electrodes is proposed for the fabrication of TE-mode poling-induced waveguides in EO polymer. For given electrode structures of both TE-mode and TM-mode waveguides, poling-induced dielectric tensors are calculated by the finite-element method to provide refractive index distribution, data for VBPM simulation. It is shown numerically that the poled TE and TM mode waveguides work efficiently as the corresponding polarization filters. Then, new poling electrodes are suggested to fabricate a waveguide device formed by connecting the TE and TM mode waveguides adiabatically with a slowly varying structure. This waveguide device has the optic axis slowly rotating as one moves along the propagation direction, so that it will act as polarization converter. VBPM simulation shows that the polarization of the guided mode rotates following the optic axis distribution. Polarization conversion is demonstrated successfully with high conversion efficiency and low excess loss     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

An empirical investigation of socio-cultural factors of information sharing in China

Understanding information sharing is an important challenge to modern organizations, and is likely to be increasingly considered when IT investment decisions are made world-wide. Our research study investigated the influence of cultural factors on information sharing in China. It was postulated that social network structures such as guanxi, Confucian dynamism, and collectivism could explain the degree to which information sharing took place between people in China. It was found that guanxi, Confucian dynamism, and collectivism all had a significant influence on information sharing.     

Isolation and characterization of a novel 5-oxoprolinase (without ATP-hydrolyzing) from Alcaligenes faecalis N-38A

A screening test was undertaken to isolate a microorganism that produced 5-oxoprolinase (without ATP-hydrolyzing). The 5-oxoprolinase (without ATP-hydrolyzing) activity (decyclization activity toward L-pyroglutamate) was found in a cell-free extract of Alcaligenes faecalis N-38A, newly isolated from a soil sample. The enzyme was purified as a homogeneous preparation. The molecular weight of the enzyme was estimated to be 47,000. The decyclization activity was specific for L-pyroglutamate, and independent of ATP and metal ions. The reaction was a reversible one, i.e., cyclization reaction of L-glutamate to yield pyroglutamate was identified.     

Clonal composition of malignant fibrous histiocytoma: analysis by PCR-based assay of the human androgen receptor gene (HUMARA)

Poly(A)+ mRNA was isolated from leaves of potato plants (Solanum tuberosum L. cv. Desiree) according to standard protocols. This poly(A)+ mRNA was injected via glass microcapillaries into oocytes that were surgically removed from the African clawed toad Xenopus laevis. As a control, oocytes were either injected with H2O or remained untreated. Three days after injection the oocytes were analyzed by two electrode voltage clamping. Current voltage analysis revealed that a K+ channel from potato was functionally expressed in injected oocytes. The identity of this K+ channel was confirmed by its substrate specificity and a shift in the reversal potential. In particular, when the outside K+ concentration was increased the reversal potential of poly(A)+ injected oocytes shifted to more positive values. Furthermore, K+ outward currents declined when the outside K+ concentration was raised from 0.1 to 100 mM. Inward currents increased with an elevation of the K+ concentration. Several pharmaceuticals were tested for their potential to block this K+ channel. As a result, the channel was completely blocked by BaCl2. A three state reaction kinetic model was used to simulate the currents through the K+ transport protein as function of the extracellular K+ concentration. In particular, the simulation revealed current voltage relations that exactly matched the measured ones. Saturation of current voltage curves emerged from the simulation as a consequence of high extracellular potassium concentration.     

A note on circle packing

The problem of packing circles into a domain of prescribed topology is considered. The circles need not have equal radii. The Collins-Stephenson algorithm computes such a circle packing. This algorithm is parallelized in two different ways and its performance is reported for a triangular, planar domain test case. The implementation uses the highly parallel graphics processing unit (GPU) on commodity hardware. The speedups so achieved are discussed based on a number of experiments.     

Modeling and control of a finger-like mechanism using bending shape memory alloys

Microsystem Technologies - In this research a biologically inspired finger-like mechanism similar to human musculoskeletal system is developed based on Shape Memory Alloys (SMAs). SMA actuators are...     

Measurement of minimum angle of resolution (MAR) in the stereoscopic display using the optotype of stereoscopic stimuli

In stereoscopic images, the crossing point of the viewing directions of the two eyes determines the perceived depth. Assuming that accommodation is affected by the positions of the crossing point, the effect of crossing point on minimum angle of resolution (MAR) was investigated. For 40 participants, MAR was measured by two‐alternative forced choice where Snellen optotype E of up and down directions were used as two kinds of stimuli. As the crossing point of the viewing direction of the left and right eyes moves farther from the sample display, the ability to identify the direction of letter E decreases at the optotype of the same line thickness. The change of MAR shows linear trends with respect to the optical power change that are the reciprocal of the distance from the participant to the crossing points located out of screen and on screen.     

Study of the Interfacial Reaction of Styrene/Maleic Anhydride Copolymerand (Amine)-Terminated Butadiene-Acrylonitrile Copolymer Using FTIR Imaging Techniques

The interfacial reaction between styrene/maleic anhydride copolymer (SMA) and amine-terminated butadiene-acrylonitrile copolymer (ATBA) was observed using Fourier transform infrared (FTIR) imaging spectroscopy. The anhydride and amine reacted to form an imide. Each component was detected using a characteristic wavenumber, which was 1601 cm -1 for SMA, 2237 cm -1 for ATBA, and 1701 cm -1 for the imide. FTIR images were taken as the reaction proceeded at 150, 160, 170, and 180°C. At low temperatures (150 and 160°C), diffusion-controlled kinetics were observed since interdiffusion between the reactants did not appear in the images. On the other hand, both the diffusion front and the reaction front are observed in the images at high reaction temperatures (170 and 180°C), which indicates that the kinetics became reaction-controlled rather than diffusion-controlled. Absorbance profiles were extracted from the images and used for the calculation of the extent of reaction. The data were analyzed using the Frederickson and Milner theory based on the assumption of diffusion-controlled kinetics, and this theory fit the low reaction temperature data.     

Solution copolymerization of methyl methacrylate and alkyl methacrylates in a continuous stirred tank reactor(CSTR)

Continuous solution copolymerization of methyl methacrylate with ethyl methacrylate or n-butyl methacrylate was carried out in a continuous stirred tank reactor. Solvent and initiator used were toluene and benzoyl peroxide, respectively. Reaction volume was 1.2 litters, residence time 3 hours and polymerization temperature 80°C. The copolymerization conversions were analyzed by UV spectrophotometry and confirmed by measuring the solid weights of copolymers obtained after evaporating solvent. The copolymerization of methyl methacrylate and alkyl methacrylates followed the second order kinetics. The simulated conversions and copolymerization rates were compared with the experimental results. The average time to reach dynamic steady-state was three and half times of the residence time.