pH temporal jumps and spatial inhomogeneities in acid-base dyelasers

The possibility of obtaining temporal jumps and inhomogeneous spatial distributions of the concentration of free protons during the laser emission of a dye laser composed by two acid-base species is shown using the numerical resolution of the corresponding set of balance equations. The differences of behavior between the case of equilibrium or nonequilibrium in the excited state are stated. The possible generation of transient photoelectrochemical effects is discussed     

Influence of ethylene‐co‐vinyl acetate copolymers on the flow properties of wax synthetic systems

Wax crystallization can cause serious damage to petroleum flow because as the viscosity increases, there is organic deposition in the pipe lines, which causes oil production reduction. Ethylene–vinyl acetate copolymers (EVA) are used as an alternative to prevent such problems. The influence of EVA copolymers on the properties of wax synthetic systems, composed of a solvent mixture and paraffin and petroleum asphalt residue (PAR), was evaluated in this work. The performance of EVA as a wax inhibitor depends on the molecular weight and vinyl acetate content of the copolymer and on the presence of the asphalt fraction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1337–1348, 2002     

A review of the metallurgy of heat treatment of welded joints

This paper deals with the metallurgical changes which occur during heat treatment of welded joints. Stress relieving heat treatment in the temperature range below A₁, the normalizing heat treatment and the heat treatment in the intercritical range A₁–A₃, are all considered. The thermal regime of welding is described. The practice of intercover of the weldment before applying PWHT to ambient temperature is described. It is stressed that the aim of stress-relieving heat treatment is not only to relax internal stresses but also to improve the microstructure and impact properties of HAZ and weld metal, to improve dimensional stability and increase resistance against stress corrosion. Examples are given of the effect of annealing in the intercritical range A₁–A₃ on the improvement in toughness of electroslag welded joints. Changes in dislocation distribution and density, precipitation processes and grain sizes during PWHT are described.     

Geometric criteria of hydrogen bonds in proteins and identification of `bifurcated' hydrogen bonds

Empirical criteria for identification of hydrogen bonds wereanalyzed to produce a set of geometrically consistent criteria.For a data set of 30 structures, application of a set of purelygeometrical criteria, along with exclusion of abnormal backboneconformations, also excluded a common interaction of Ser/Thrside chains with Asp/Glu side chains ([ST]/[DE] pairs). Theseinteractions were termed `bifurcated hydrogen bonds/', whichimplies delocalization of a positively charged hydrogen of hydroxylbetween the two acceptor atoms of the carboxylic group. These`bifurcated/' interactions are among the most common packingpatterns for [ST]/[DE] pairs of side chains. Therefore, theidentification of hydrogen bonds cannot be based on geometricalcriteria only and requires introduction of some physico-chemicalcriteria.     

Node and element resequencing using the Laplacian of a finite element graph: Part I—General concepts and algorithm

A Finite Element Graph (FEG) is defined here as a nodal graph (G), a dual graph (G*), or a communication graph (G˙) associated with a generic finite element mesh. The Laplacian matrix ( L (G), L (G*) or L (G˙)), used for the study of spectral properties of an FEG, is constructed from usual vertex and edge connectivities of a graph. An automatic algorithm, based on spectral properties of an FEG (G, G* or G˙), is proposed to reorder the nodes and/or elements of the associated finite element mesh. The new algorithm is called Spectral PEG Resequencing (SFR). This algorithm uses global information in the graph, it does not depend on a pseudoperipheral vertex in the resequencing process, and it does not use any kind of level structure of the graph. Moreover, the SFR algorithm is of special advantage in computing environments with vector and parallel processing capabilities. Nodes or elements in the mesh can be reordered depending on the use of an adequate graph representation associated with the mesh. If G is used, then the nodes in the mesh are properly reordered for achieving profile and wavefront reduction of the finite element stiffness matrix. If either G* or G˙ is used, then the elements in the mesh are suitably reordered for a finite element frontai solver, A unified approach involving FEGs and finite element concepts is presented. Conclusions are inferred and possible extensions of this research are pointed out. In Part II of this work,¹ the computational implementation of the SFR algorithm is described and several numerical examples are presented. The examples emphasize important theoretical, numerical and practical aspects of the new resequencing method.     

An Extended Quadratic Frobenius Primality Test with Average- and Worst-Case Error Estimate

We present an Extended Quadratic Frobenius Primality Test (EQFT), which is related to the Miller-Rabin test and to several other known probabilistic tests. EQFT takes time equivalent to about two or three Miller-Rabin tests, but has a much smaller error probability, namely 256/331776^t for t iterations of the test in the worst case. We also give bounds on the average-case behaviour of the test: consider the algorithm that repeatedly chooses random odd k bit numbers, subjects them to t iterations of our test and outputs the first one found that passes all tests. We obtain numeric upper bounds for the error probability of this algorithm as well as a general closed expression bounding the error. For instance, it is at most 2^-155 for k = 500, t = 2. Compared with earlier similar results for the Miller-Rabin test, the results indicate that our test in the average case has the effect of nine Miller-Rabin tests. We also give bounds for the error in case a prime is sought by incremental search from a random starting point.     

Characteristics of a NaOH-Activated Blast Furnace Slag Blended with a Fine Particle Silica Waste

Mortars of blast furnace slag blended with a geothermal silica waste at various replacement levels of 0%, 5%, 10%, 15%, and 20% were cured for up to 90 days. The binder was activated by 6 wt% Na₂O equivalent of sodium hydroxide. Lime was added as an activating agent and also to promote pozzolanic reaction with the silica. It was found that the presence of the silica waste increased the reactivity of the cementitious materials, as measured by means of nonevaporable water. The compressive strength was increased in the presence of the silica, except at the highest replacement level of 20%, the optimum silica replacement was that of 5%–10%. The microstructures of blended slag showed less porosity than those of neat slag mortars. The lime was completely consumed after 90 days of hydration.     

Production of phosphoric acid with low content of impurities

The present work is to study the possibility for controlled distribution of the impurities when they are decomposed by sulphuric acid to wet phosphoric acid and phosphogypsum, as well as generating technological conditions for production of clean wet phosphoric acid and its derivatives - phosphoric fertilizers, food phosphates and other phosphoric products.A coefficient of distribution D_A is introduced as a general criterion for elements dispersion. The study includes relationships between the weight ratio sulphuric acid/natural phosphate and D_A; the period of decomposition and D_A; the particle's size content of the natural phosphate and D_A. The obtained experimental data and relationships about the influence of the above discussed technological parameters on dispersion of more than 23 elements allow for control of that process in wet phosphoric acid and phosphogypsum by selecting specific technological conditions. Thus, depending on the requirements of acid's consumers and procedures for secondary processing of phosphogypsum to end-products, a selective decomposition of the natural phosphates to phosphoric acid and phosphogypsum can be carried out with content of the impurities in those products varying in narrow limits.     

Psychopathology in inpatients dependent on cocaine or alcohol and cocaine.

Assessed the differences between cocaine- and cocaine-plus-alcohol-dependent inpatients along several psychological variables. Of the 144 men that served as Ss, 113 were cocaine dependent and 31 were dependent on both cocaine and alcohol (CD-AD). CD-AD Ss showed significantly more symptoms of depression and anxiety and were more likely to have antisocial and avoidant personality disorders. The CD-AD group scored higher overall on the MMPI clinical scales. Results suggest that patients dependent on both cocaine and alcohol require increased attention to psychopathology during treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)