Arsenic and heavy metals in soils associated with regional geochemical anomalies in South-West England

Regional geochemical maps have shown extensive anomalies of arsenic, copper and other heavy metals in those parts of South-West England associated with mineralised zones around the granite intrusion. Studies in the vicinity of the River Tamar and of the metamorphic aureole around Dartmoor have confirmed significantly higher concentrations of arsenic and heavy metals in soils contaminated by mining, smelting and mineralisation compared with those from nearby control areas. Arsenic and copper show the greatest degree of enhancement ranging up to 900 ppm As and 2000 ppm Cu in both alluvial and upland topsoils within the Tamar area. Preliminary analyses indicate that the trace metal content of pasture herbage-reflects in part the degree of soil contamination. Maximum concentrations of 35 ppm As and 22 ppm Cu in autumn sampled herbage were found at contaminated sites compared with mean values of less than 0.5 ppm As and 8 ppm Cu in control areas. Geochemical reconnaissance surveys based on stream sediment sampling provide a useful indication of areas wherein widescale soil contamination may occur.     

The centralization index: A measure of local spatial segregation

Segregated areas may occur around an attractive park or a waste incinerator, but the magnitude and group membership of the people in closest proximity will likely be difierent. We therefore introduce a local segregation measure that can be applied to any location within a metropolitan area, and that can identify the group that is relatively more concentrated around that reference location. We further introduce an inference approach to identify the statistical significance of a particular segregation value. In an exploratory setting the index can be used to generate a map of hot spots, and seed the question: “why is this group significantly concentrated around that location?”     

Operational management of trunk main discolouration risk

Despite significant on-going investment, water companies continue to receive an unacceptable number of discolouration related customer contacts. In this paper, data from intensive distribution system turbidity monitoring and cluster analysis of discolouration customer contacts indicate that a significant proportion of these contacts are due to material mobilising from the trunk main system, and operational flow increases are shown to have a higher discolouration risk than burst incidents. A trunk main discolouration incident highlighting this risk is discussed, demonstrating the need for pro-active trunk main risk assessments. To identify the source of the material event flow rates were modelled using the PODDS (prediction of discolouration in distribution systems) discolouration model. Best practice pro-active management is demonstrated in a case study where the PODDS model is used to implement managed incremental flow changes on a main with known discolouration risk with no discolouration impact to customers and significant cost savings.     

Development of a thermal scheme for a cogeneration combined-cycle unit with an SVBR-100 reactor

At present, the prospects for development of district heating that can increase the effectiveness of nuclear power stations (NPS), cut down their payback period, and improve protection of the environment against harmful emissions are being examined in the nuclear power industry of Russia. It is noted that the efficiency of nuclear cogeneration power stations (NCPS) is drastically affected by the expenses for heat networks and heat losses during transportation of a heat carrier through them, since NPSs are usually located far away from urban area boundaries as required for radiation safety of the population. The prospects for using cogeneration power units with small or medium power reactors at NPSs, including combined-cycle units and their performance indices, are described. The developed thermal scheme of a cogeneration combined-cycle unit (CCU) with an SBVR-100 nuclear reactor (NCCU) is presented. This NCCU should use a GE 6FA gasturbine unit (GTU) and a steam-turbine unit (STU) with a two-stage district heating plant. Saturated steam from the nuclear reactor is superheated in a heat-recovery steam generator (HRSG) to 560–580°C so that a separator–superheater can be excluded from the thermal cycle of the turbine unit. In addition, supplemental fuel firing in HRSG is examined. NCCU effectiveness indices are given as a function of the ambient air temperature. Results of calculations of the thermal cycle performance under condensing operating conditions indicate that the gross electric efficiency η _{el NCCU} ^gr of = 48% and N _{el NCCU} ^gr = 345 MW can be achieved. This efficiency is at maximum for NCCU with an SVBR-100 reactor. The conclusion is made that the cost of NCCU installed kW should be estimated, and the issue associated with NCCUs siting with reference to urban area boundaries must be solved.     

ESMRMB 2017, 34th Annual Scientific Meeting,Barcelona, ES,October 19–October 21: Abstracts,Thursday

Objective

Current magnetic resonance imaging (MRI) axon diameter measurements rely on the pulsed gradient spin-echo sequence, which is unable to provide diffusion times short enough to measure small axon diameters. This study combines the AxCaliber axon diameter fitting method with data generated from Monte Carlo simulations of oscillating gradient spin-echo sequences (OGSE) to infer micron-sized axon diameters, in order to determine the feasibility of using MRI to infer smaller axon diameters in brain tissue.

Materials and methods

Monte Carlo computer simulation data were synthesized from tissue geometries of cylinders of different diameters using a range of gradient frequencies in the cosine OGSE sequence . Data were fitted to the AxCaliber method modified to allow the new pulse sequence. Intra- and extra-axonal water were studied separately and together.

Results

The simulations revealed the extra-axonal model to be problematic. Rather than change the model, we found that restricting the range of gradient frequencies such that the measured apparent diffusion coefficient was constant over that range resulted in more accurate fitted diameters. Thus a careful selection of frequency ranges is needed for the AxCaliber method to correctly model extra-axonal water, or adaptations to the method are needed. This restriction helped reduce the necessary gradient strengths for measurements that could be performed with parameters feasible for a Bruker BG6 gradient set. For these experiments, the simulations inferred diameters as small as 0.5 μm on square-packed and randomly packed cylinders. The accuracy of the inferred diameters was found to be dependent on the signal-to-noise ratio (SNR), with smaller diameters more affected by noise, although all diameter distributions were distinguishable from one another for all SNRs tested.

Conclusion

The results of this study indicate the feasibility of using MRI with OGSE on preclinical scanners to infer small axon diameters.

     

Ultrafast terahertz responses in monolayer graphene

ABSTRACT

We theoretically investigate the ultrafast terahertz (THz) properties of monolayer graphene. The analytical formulations of the photon carrier, electric polarization and optical current are obtained by solving the Bloch-equations in present of the ultrafast THz Gaussian pulse. Graphene shows a large nonlinear and ultrafast optical response at THz frequencies due to the gapless and relativistic Dirac particles with nearly linear energy dispersion. It is found that the photon carrier density, electric polarization and optical current density increase with increasing the frequency of the THz pulse. These theoretical results are in agreement with recent experimental findings. This study confirms further that graphene exhibits important features and is relevant to the applications in the ultrafast THz fields.     

An Improved On-line Contingency Screening for Power System Transient Stability Assessment

This paper presents a contingency screening method and a framework for its on-line implementation. The proposed method carries out contingency screening and on-line stability assessment with respect to first-swing transient stability. For that purpose, it utilizes the single machine equivalent method and aims at improving the prior developed contingency screening approaches. In order to determine vulnerability of the system with respect to a particular contingency, only one time-domain simulation needs to be performed. An early stop criteria is proposed so that in a majority of the cases the simulation can be terminated after a few hundred milliseconds of simulated system response. The method’s outcome is an assessment of the system’s stability and a classification of each considered contingency. The contingencies are categorized by exploiting parameters of an equivalent one machine infinite bus system. A novel island detection approach, appropriate for an on-line application since it utilizes efficient algorithms from graph theory and enables stability assessment of individual islands, is also introduced. The New England and New York system as well as the large-scale model of the Continental-European interconnected system are used to test the proposed method with respect to assessment accuracy and computation time.     

Energy-efficient algorithms for assessment of the rail-circuit operation

The voltage in a rail circuit is determined for reliable detection of the mobile unit or a train on the section of the railway track. It is proposed to use the structures of the automatic block system based on the time-division channels of status scanning of the rail circuits with subsequent signal processing by two parameters. The first parameter includes the assessment of correspondence of the code signals transmitted to the rail circuit and received from the rail circuit. The second parameter is obtained based on the analysis of the voltage at the rail-circuit output within the current and previous measurements considering the voltagechange rate. This latter parameter makes it possible to distinguish reliably the state when the rail track is occupied by the train from the random changes of the rail-circuit parameters from the influence of the external factors. The proposed algorithms permit one to reduce significantly consumption of electric energy providing operation of rail circuits.     

Knowledge formation and learning in the management of projects: A problem solving perspective

In contrast to traditional projects, which are assumed to be fully specified and then executed with little learning anticipated, complex projects cannot be fully specified at the outset and require continuous learning over their life cycles. Nevertheless, the key role of knowledge formation and learning in managing complex projects is under-developed for expanding project capability boundaries to include knowledge uncertainty and indeterminacy.     

The Effects of Annealing After Equal Channel Angular Extrusion (ECAE) on Mechanical and Magnetic Properties of 49Fe-49Co-2V Alloy

Metallurgical and Materials Transactions A - Equal channel angular extrusion (ECAE) of 49Fe-49Co-2V, also known as Hiperco® 50A or Permendur-2V, greatly improves the strength and ductility of...