Detonation-induced coal gasification

A preliminary experimental and theorotical investigation of the feasibility of detonation-induced pulverized coal gasification is described. The concept envisions a closed annular detonation duct through which a hydrogen/oxygen gasphase detonation propagates continuously. Coal particles injected into the violent and rapidly changing atmosphere produced by the detonation would undergo gasification reactions and be subsequently expelled from the duct. These events would occur in a time period compatible with one revolution of the detonation. A one-dimensional analysis of the response of a single coal particle within the expansion-wave region behind the detonation front is presented. Independent variables include particle diameter, initial H₂/O₂ stoichiometry and expansion wavelength (at the time the particle is overtaken by the detonation front). The most significant result of this analysis is the prediction of relative gas/particle velocities ranging between 125 and 1500m/s, which are sustained throughout particle residence times of 1–15 ms corresponding to 10–1000 μm diameter particles. An experimental facility comprising a 47 m ‘single-shot’ detonation duct that was built for this study is discussed. The duct was 2.54 cm square and was terminated at each end by a 0.36 m diameter × 2.44 m long cylindrical tank which contained helium gas during a test. Sized coal particles were placed at a point within the first 3.7 m length of the duct, and thin brass diaphragms initially separated the duct from the two helium-filled tanks. Detonation was initiated at the duct, end closest to these particles. The diaphragm at that end burst, allowing combustion and gasification products to exhaust into the adjoining tank where they were quenched and decelerated. When the detonation reached the far end of the duct the second diaphragm burst, minimizing wave reflections which would otherwise return to the ‘test section’ end and interfere with the flow field there. After a test the contents of both tanks and the duct were circulated and mixed. A gas sample was then drawn and analysed for yield. Results from preliminary experiments using this facility are presented. Although too few tests were conducted for conclusive observations to be reported, in two experiments yields of CO + CH₄ representing 40 per cent of the total initial carbon content in the coal samples were obtained.     

Making decentralised systems viable: a guide to managing decentralised assets and risks.

Decentralised systems have the potential to provide a viable option for long term sustainable management of household wastewater. Yet, at present, such systems hold an uncertain status and are frequently omitted from consideration. Their potential can only be realised with improved approaches to their management, and improved methods to decision-making in planning of wastewater systems. The aim of this paper is to demonstrate the value of a novel framework to guide the planning of decentralised systems so that asset management and risk management are explicitly considered. The framework was developed through a detailed synthesis of literature and practice in the area of asset management of centralised water and wastewater systems, and risk management in the context of decentralised systems. Key aspects of the framework are attention to socio-economic risks as well as engineering, public health and ecological risks, the central place of communication with multiple stakeholders and establishing a shared asset information system. A case study is used to demonstrate how the framework can guide a different approach and lead to different, more sustainable outcomes, by explicitly considering the needs and perspectives of homeowners, water authorities, relevant government agencies and society as a whole.     

A Mass Transport Model for Drying Wood under Isothermal Conditions

Mass transport in wood during drying can have different mechanisms at different periods of drying. Depending on the current moisture content (MC) and the structure of the wood, the driving forces for the mass transport are essentially different. Above the fiber saturation point (FSP), the lumens are partially saturated and the transport of liquid (free) water occurs as a consequence of capillary action. On the other hand, below the FSP, bound water within the cell walls is conveyed by diffusion, and water vapor in the lumens moves under influence of pressures gradient. Based on these considerations, a unified model is presented that takes into account the transport of the different moisture phases. Simulation of the drying of a Norway spruce sample at 50°C from about 135 to 7% MC is carried out using the finite element method (FEM). Comparison between the simulated average MC and the experimental observations obtained from X-ray computed tomography (CT) shows reasonable agreement. Possible simplifications in the model are briefly discussed as well as some aspects of the numerical implementation. Finally, the influence of absolute permeability on the average MC is studied.     

IGES Model Comparison System: A Tool for Tsting and Validating IGES Processors

The IGES Model Comparison System (IMCOS) is the first test tool to allow an easy and automatic semantic comparison of CAD models represented in IGES format. By systematically analyzing and comparing entity data and structures of generated and exchanged IGES models, it detects loss of information and functionality resulting from model exchange via IGES processors. IMCOS was designed and implemented as a tabledriven IGES processor to allow external control of the comparison process and full coverage of the current version of IGES (Version 3.0) and future versions. This article presents the basic concepts of IMCOS. The great interest in and discussion of IMCOS have shown the importance of such a test tool. IMCOS may be used as one of several test tools within an overall IGES verification program.     

A NOTE: POLYVALENT RADIOVACCINE AGAINST SALMONELLA

Salmonella strains exposed to lethal doses of gamma radiation are detoxified but retain their antigenic properties. Using eight Salmonella strains representative of each of the Salmonella serogroups A to G, a polyvalent radiovaccine has been developed which effectively immunizes mice to several Salmonella serotypes.     

Wheat wet fractionation processes

In this review the wet fractionation of wheat into major components has been described. At first early whole wheat processes - the Halle fermentation and the Alsation method - have been outlined. Then the following new processes have been discussed: Corn wet milling type process, Pillsbury hydro process, Far-Mar-Co-process and Screening process. At last wet fraction processes of flour (Martin, Batter, Alkali, Fesca, Alfa-Laval/Raisio) will be considered.     

Kenntlichmachung der abweichenden Beschaffenheit von Zutaten auf Speisekarten

Ohne Zusammenfassung     

Possibility of sewage and combined sewer overflow reuse with biological aerated filters.

The secondary effluent from municipal plants in Korea generally represents higher BOD with lower SS. Therefore, more soluble forms of organics and NH4-N need to be removed to improve its effluent for reuse. In this study reuse possibility of secondary effluent and CSO (combined sewer overflow) using BAF (biological aerated filter) was evaluated. The tertiary application with 1.2 h EBCT, SS, BOD and COD showed stable concentrations less than 1.3, 1.3 and 6.2 mg/L, respectively. Nitrogen could be nitrified even at 7 degrees suggesting BAF can be used for a water reuse method as well as an effective add-on facility in cold regions. However, BAF was not stable with CSO application at increased flow rates suggesting CSO must be equalised prior to application. Disinfection was necessary even during normal weather conditions.