The Mental Deterioration Battery: normative data, diagnostic reliability and qualitative analyses of cognitive impairment. The Group for the Standardization of the Mental Deterioration Battery

This study aimed at investigating the clinical usefulness of the Mental Deterioration Battery (MDB) in the neuropsychological diagnosis and characterization of the dementia syndrome. In this paper, we report: (a) normative data for various test scores derived from the analysis of performance of 340 normal subjects living in urban areas; (b) an evaluation of the reliability of the single tests and of the battery as a whole in differentiating normal subjects from patients affected by cognitive deterioration derived from the analysis of performance of 130 normal subjects living in rural areas and 134 patients affected by probable Alzheimer's dementia; (c) a cluster analysis of performances of the 340 normal subjects in the standardization group to evaluate possible criteria of homogeneity according to which the various MDB scores tend to aggregate; (d) an analysis of performance profiles of 183 patients with right monohemispheric focal lesions, 159 patients with left unilateral lesions with aphasia and 131 left-lesioned nonaphasic patients to evaluate the specificity of the single tests of the battery in documenting a selective impairment of one of the two cerebral hemispheres. Results confirm the reliability of the MBD in discriminating between normal and demented patients and provide indications for use of the battery in differentiating qualitative patterns of cognitive impairment.     

Anodic stripping voltametric cell for determination of copper and lead in atmospheric dust

Studies of air pollution by metals contained in dust particules usually require mineralization of a dust-collecting filter. This treatment introduces impurities into the sample. To avoid such contamination, an anodic stripping cell was constructed requiring no preliminary treatment of the sample filter. The cell uses a three-electrode amperometric system in differential pulse anodic stripping mode (DPAS). Solubilization of the metals from dust by a complexing agent, instead of the strong acid normally encountered in other methods, allows selective determination of metals according to their chemical form. With this cell, minimal handling of the collection filter and a large area mercury-coated vitreous carbon electrode located close to the sample filter (2 mm) lead to limits of detection as low as 0.15 μg of lead and 10 ng of copper. Precision is 2% for lead determination and 4% for copper determination (RSD).     

Digital agnosia and lesions of the parietal lobe

130 patients with focal brain damage have been submitted to non-verbal finger identification tasks. The results of this research can be summarized as follows: -when bilateral finger agnosia is studied with non-verbal tasks, no difference can be shown between right and left parietal lesions; -in left brain damaged patients the bilateral form of finger agnosia is generally due to large lesions involving the parietal lobe; -in right brain damaged patients the unilateral form of finger agnosia is almost always due to lesions centered on the parietal region.     

Etude de la resistivité de corps pulvérulents à base de carbone en fonction de la compression

Electrical resistance measurements were performed on different varieties of carbon blacks (Sterling Fr, MT, S, Black Pearls 2) under compression up to 660 kgf/cm² to determine the real resistivity of the carbon material. The general shape of the curves log p= - s log P are in good agreement with those reported by Mrozowski. Two theories have been proposed to explain the mechanism of the current flow through the particles. Holm's Contacts and the Tunnel effect between particles. The results for thermal blacks seem to agree with the first interpretation while the behaviour of the Channel blacks rather follows the second.     

A fixed grid method for the numerical solution of phase change problems

A fixed grid method using an updated iterative implicit scheme is developed to solve one-dimensional phase change problems. The temperature field is deduced from the resolution of the governing equations whose discretization takes into account the discontinuous variation of the temperature derivative at the phase change front. At each iteration an updated position of the moving front is found from the resolution of the energy conservation at the solid-liquid interface. The accuracy of the proposed numerical method has been checked on three test problems.     

Oryctes monoceros Trapping with Synthetic Pheromone and Palm Material in Ivory Coast

Oryctes monoceros is the most serious pest in coconut plantations, causing up to 40% damage in tropical Africa, especially in Ivory Coast. With a view to reducing pest populations by olfactory trapping, field trials were carried out to assess the efficiency of a synthetic aggregation pheromone: ethyl 4-methyloctanoate (1), 4-methyloctanoic acid (2), a related volatile produced by males, and decaying palm material, either oil palm empty fruit bunches (EFB) or pieces of coconut wood (CW) of various ages. Vertical polyvinyl chloride tube traps (2 × 0.16 m with two openings in the upper half), embedded in the soil, were more efficient than 30-L pail traps 1.5 m above ground. EFB, which were inactive alone, synergized captures with synthetic pheromone. CW was more effective than EFB in comparative trials. Compound 2 did not catch any beetles when assessed with EFB, and reduced catches by 1 + EFB when tested at >10% with the pheromone. Trapping over 6 mo in 2002 and 2003 in a 19-ha coconut plot inside a 4,000-ha oil palm estate reduced damage from 3.8% in 2001 to 0.5% in 2002, then to 0.2% in 2003. Damage was 0.0% in 2004 with routine trapping using 32 traps, which caught 3369 beetles in 9 mo. The results are discussed in relation to other Dynastid palm pests and coconut protection in Ivory Coast.     

Study of the Transit-Time Limitations of the Impulse Response in Mid-Wave Infrared HgCdTe Avalanche Photodiodes

The impulse response in frontside-illuminated mid-wave infrared HgCdTe electron avalanche photodiodes (APDs) has been measured with localized photoexcitation at varying positions in the depletion layer. Gain measurements have shown an exponential gain, with a maximum value of M = 5000 for the diffusion current at a reverse bias of V _b = 12 V. When the light was injected in the depletion layer, the gain was reduced as the injection approached the N+ edge of the junction. The impulse response was limited by the diode series resistance–capacitance product, RC, due to the large capacitance of the diode metallization. Hence, the fall time is given by the RC constant, estimated as RC = 270 ps, and the rise time is due to the charging of the diode capacitance via the transit and multiplication of carriers in the depletion layer. The latter varies between t _10–90 = 20 ps (at intermediate gains M < 500) and t _10–90 = 70 ps (at M = 3500). The corresponding RC-limited bandwidth is BW = 600 MHz, which yields a new absolute record in gain–bandwidth product of GBW = 2.1 THz. The increase in rise time at high gains indicates the existence of a limit in the transit-time-limited gain–bandwidth product, GBW = 19 THz. The impulse response was modeled using a one-dimensional deterministic model, which allowed a quantitative analysis of the data in terms of the average velocity of electrons and holes. The fitting of the data yielded a saturation of the electron and hole velocity of v _e = 2.3 × 10⁷ cm/s and v _h = 1.0 × 10⁷ cm/s at electric fields E > 1.5 kV/cm. The increase in rise time at high bias is consistent with the results of Monte Carlo simulations and can be partly explained by a reduction of the electron saturation velocity due to frequent impact ionization. Finally, the model was used to predict the bandwidth in diodes with shorter RC = 5 ps, giving BW = 16 GHz and BW = 21 GHz for x _j = 4 μm and x _j = 2 μm, respectively, for a gain of M = 100.     

粉末型硅烷／有机硅添加剂在水泥基材中的应用

介绍了有机硅作为憎水剂在水泥基材料中的作用,介绍了有机硅粉状憎水剂的主要组分及其性能。通过实验证明,有机硅粉状添加剂SHP50及SHP60是一种高效的憎水剂,应用于水泥基干混材料中,赋予了砂浆良好的疏水特性。     

Bifidobacterium carbohydrases-their role in breakdown and synthesis of (potential) prebiotics

There is an increasing interest to positively influence the human intestinal microbiota through the diet by the use of prebiotics and/or probiotics. It is anticipated that this will balance the microbial composition in the gastrointestinal tract in favor of health promoting genera such as Bifidobacterium and Lactobacillus. Carbohydrates like non-digestible oligosaccharides are potential prebiotics. To understand how these bacteria can grow on these carbon sources, knowledge of the carbohydrate-modifying enzymes is needed. Little is known about the carbohydrate-modifying enzymes of bifidobacteria. The genome sequence of Bifidobacterium adolescentis and Bifidobacterium longum biotype longum has been completed and it was observed that for B. longum biotype longum more than 8% of the annotated genes were involved in carbohydrate metabolism. In addition more sequence data of individual carbohydrases from other Bifidobacterium spp. became available. Besides the degradation of (potential) prebiotics by bifidobacterial glycoside hydrolases, we will focus in this review on the possibilities to produce new classes of non-digestible oligosaccharides by showing the presence and (transglycosylation) activity of the most important carbohydrate modifying enzymes in bifidobacteria. Approaches to use and improve carbohydrate-modifying enzymes in prebiotic design will be discussed.     

Towards a simple and safe Objective Caml compiling framework for the synchronous language SIGNAL

This paper presents a simple and safe compiler, called MinSIGNAL, from a subset of the synchronous dataflow language SIGNAL to C, as well as its existing enhancements. The compiler follows a modular architecture, and can be seen as a sequence of source-to-source transformations applied to an intermediate representation which is named Synchronous Clocked Guarded Actions (S-CGA) and translation to sequential imperative code. Objective Caml (OCaml) is used for the implementation of MinSIGNAL. As a modern functional language, OCaml is adapted to symbolic computation and so, particularly suitable for compiler design and implementation of formal analysis tools. In particular, the safety of its type checking allows to skip some verification that would be mandatory with other languages. Additionally, this work is a basis for the formal verification of the compilation of SIGNAL with a theorem prover such as Coq.