Porous Perovskite Fibers – Preparation by Wet Phase Inversion Spinning and Catalytic Activity

Porous perovskite (LaMnO₃) fibers were prepared by means of wet phase inversion spinning. The influence of different spinning procedures, slurry and coagulation bath composition on fiber shape and pore morphology was studied. The catalytic activity of the prepared fibers was tested for carbon monoxide oxidation as a model reaction in a differential recycle reactor. The results revealed that by suitable choice of process conditions porous catalytically active fibers can be prepared. Catalytic measurements confirmed that the catalytic fibers exhibit an open structure that allows full utilization of the catalytically active surface without intraparticle diffusional limitations.     

A New Stable Splitting for the Isentropic Euler Equations

In this work, we propose a new way of splitting the flux function of the isentropic compressible Euler equations at low Mach number into stiff and non-stiff parts. Following the IMEX methodology, the latter ones are treated explicitly, while the first ones are treated implicitly. The splitting is based on the incompressible limit solution, which we call reference solution. An analysis concerning the asymptotic consistency and numerical results demonstrate the advantages of this splitting.     

Anaerobic methane oxidation and aerobic methane production in an east African great lake (Lake Kivu)

We investigated CH₄ oxidation in the water column of Lake Kivu, a deep meromictic tropical lake with CH₄-rich anoxic deep waters. Depth profiles of dissolved gases (CH₄ and N₂O) and a diversity of potential electron acceptors for anaerobic CH₄ oxidation (NO₃^?, SO₄^2?, Fe and Mn oxides) were determined during six field campaigns between June 2011 and August 2014. Denitrification measurements based on stable isotope labelling experiments were performed twice. In addition, we quantified aerobic and anaerobic CH₄ oxidation, NO₃^? and SO₄^2? consumption rates, with and without the presence of an inhibitor of SO₄^2?-reducing bacteria activity. Aerobic CH₄ production was also measured in parallel incubations with the addition of an inhibitor of aerobic CH₄ oxidation. The maximum aerobic and anaerobic CH₄ oxidation rates were estimated to be 27?±?2 and 16?±?8?μmol/L/d, respectively. We observed a difference in the relative importance of aerobic and anaerobic CH₄ oxidation during the rainy and the dry season, with a greater role for aerobic oxidation during the dry season. Lower anaerobic CH₄ oxidation rates were measured in presence of molybdate in half of the measurements, suggesting the occurrence of linkage between SO₄^2? reduction and anaerobic CH₄ oxidation. NO₃^? consumption and dissolved Mn production rates were never high enough to sustain the measured anaerobic CH₄ oxidation, reinforcing the idea of a coupling between SO₄^2? reduction and CH₄ oxidation in the anoxic waters of Lake Kivu. Finally, significant rates (up to 0.37?μmol/L/d) of pelagic CH₄ production were also measured in oxygenated waters.     

Comparison of an effect-model-law-based method versus traditional clinical practice guidelines for optimal treatment decision-making: application to statin treatment in the French population

Healthcare authorities make difficult decisions about how to spend limited budgets for interventions that guarantee the best cost-efficacy ratio. We propose a novel approach for treatment decision-making, OMES—in French: Objectif thérapeutique Modèle Effet Seuil (in English: Therapeutic Objective–Threshold–Effect Model; TOTEM). This approach takes into consideration results from clinical trials, adjusted for the patients'' characteristics in treatment decision-making. We compared OMES with the French clinical practice guidelines (CPGs) for the management of dyslipidemia with statin in a computer-generated realistic virtual population, representing the adult French population, in terms of the number of all-cause deaths avoided (number of avoided events: NAEs) under treatment and the individual absolute benefit. The total budget was fixed at the annual amount reimbursed by the French social security for statins. With the CPGs, the NAEs was 292 for an annual cost of 122.54 M€ compared with 443 with OMES. For a fixed NAEs, OMES reduced costs by 50% (60.53 M€ yr⁻¹). The results demonstrate that OMES is at least as good as, and even better than, the standard CPGs when applied to the same population. Hence the OMES approach is a practical, useful alternative which will help to overcome the limitations of treatment decision-making based uniquely on CPGs.     

CFD and experimental investigation of the gas–liquid flow in the distributor of a compact heat exchanger

High performance of compact heat exchangers is conditioned by correct fluid distribution. This is especially true for gas–liquid heat exchangers where a uniform distribution is particularly delicate to obtain and where maldistribution entails significant performance deterioration. Several phenomena can lead to phase distribution problems: the fins may be subject to manufacturing defects or fouling, leading to shortcuts or dead zones. But the first source of maldistribution may be a poor distribution at the outlet of the entrance distributor. This distributor aims at mixing the phases and distributing them across the channels.     

Influence of flour blend composition on fermentation kinetics and phytate hydrolysis of sourdough used to make injera

The influence of cereal blends, teff–white sorghum (TwS), barley–wheat (BW) and wheat–red sorghum (WrS), on fermentation kinetics during traditional fermentation of dough to prepare injera, an Ethiopian traditional fermented pancake, was investigated in samples collected in households. Barley malt was used with BW and WrS flours. WrS- and BW-injera sourdough fermentations were characterised by a transient accumulation of glucose and maltose and a two-step fermentation process: lactic acid fermentation and alcoholic fermentation with ethanol as the main end product. Only transient accumulation of glucose was observed in TwS-injera, and equimolar concentrations of lactic acid and ethanol were produced simultaneously. Final α-galactoside concentrations were low in all sourdoughs. Phytic acid (IP6) was completely hydrolyzed in WrS and BW-injeras probably due to the combined action of endogenous malt and microbial phytases. Only 28% IP6 hydrolysis was observed in TwS injera. Ways to improve IP6 hydrolysis in TwS-injera need to be investigated.     

Distributing prejudice unequally: Do Whites direct their prejudice toward strongly identified minorities?

Across 6 studies, Whites expressed more negative attitudes toward strongly identified racial minorities than toward weakly identified minorities. Whites who personally endorsed worldviews that legitimize the status hierarchy were particularly likely to express negative attitudes toward strongly identified minorities relative to weakly identified minorities, whereas Whites who personally rejected status-legitimizing worldviews displayed the opposite pattern. In addition, Whites' biases against strongly identified minorities dissipated when strongly identified minorities expressed strong endorsement of status-legitimizing worldviews. These studies suggest that Whites do not distribute their prejudicial attitudes equally among all members of minority groups and that some subsets of minorities (the strongly identified) might bear the brunt of racial prejudice. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Selective Laser Melting process optimization of Ti–Mo–TiC metal matrix composites

Selective Laser Melting (SLM) was used to process a powder mixture of CP Ti, 6.5 wt% Mo and 3.5 wt% Mo₂C. The process parameters were optimized to obtain full-density, crack free parts. After the in situ decomposition of Mo₂C in favor of the formation of TiC, the material consisted of a homogeneous dispersion of submicrometer sized TiC platelets in a β-(Ti,Mo) matrix exhibiting a high hardness up to 550 HV and compressive yield stress of 1164 ± 37 MPa. The microstructure and mechanical properties could be tailored by variation of the process parameters within the high-density processing window, as well as through post-process heat treatments.     

Measurements of the Refractive Index Increment on Hydroxyethyl Starch as a Basis for Absolute Molecular Weight Determinations

Solutions of hydroxyethyl starch are used as a blood plasma substitute. If their physiological efficiency is to be optimized, they need to be accurately characterized in terms of their molecular weight and its distribution. The absolute determination of molecular weight and molecular weight distribution by means of light scattering require a knowledge of the refractive index increment. Although numerous investigations of the refractive index increment of hydroxyethyl starch have already been published, the results vary significantly due to the use of different samples and the choice of different measuring parameters. There was therefore an urgent need to examine the extent to which the refractive index increment depends on molecular parameters, the experimental method used and the type of processing. Here it was found that different sample preparations result in different contents of solid matter, so that an exact determination of the quantity is required. Hydroxyethyl starches in the molecular weight range of about Mw = 200.000 g/mol and varying degrees of substitution between DS 0.38 and 0.50 which are regarded as optimal for clinical use give a refractive index increment of dn/dc^633nm = 0.146 = 0.005 cm³/g (solvent: H₂O/0.02% NaN₃; T = 25°C).