Organic‐acid‐catalyzed sol–gel route for preparing poly(methyl methacrylate)–silica hybrid materials

In this study, a series of organic–inorganic hybrid sol–gel materials consisting of a poly(methyl methacrylate) (PMMA) matrix and dispersed silica (SiO₂) particles were successfully prepared through an organic‐acid‐catalyzed sol–gel route with N‐methyl‐2‐pyrrolidone as the mixing solvent. The as‐synthesized PMMA–SiO₂ nanocomposites were subsequently characterized with Fourier transform infrared spectroscopy and transmission electron microscopy. The solid phase of organic camphor sulfonic acid was employed to catalyze the hydrolysis and condensation (i.e., sol–gel reactions) of tetraethyl orthosilicate in the PMMA matrix. The formation of the hybrid membranes was beneficial for the physical properties at low SiO₂ loadings, especially for enhanced mechanical strength and gas barrier properties, in comparison with the neat PMMA. The effects of material composition on the thermal stability, thermal conductivity, mechanical strength, molecular permeability, optical clarity, and surface morphology of the as‐prepared hybrid PMMA–SiO₂ nanocomposites in the form of membranes were investigated with thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, gas permeability analysis, ultraviolet–visible transmission spectroscopy, and atomic force microscopy, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of novel copolymer containing pyridylazo-2-naphthoxyl group via reversible addition–fragmentation chain transfer (RAFT) polymerization

A novel monomer containing pyridylazo-2-naphthoxyl group, 1-(1-(4-vinylbenzyloxy)naphthalen-2-yl)-2-(pyridin-2-yl)diazene (VBNPA), was successfully synthesized and copolymerized with styrene (St) in N,N-dimethyl formamide (DMF) via reversible addition–fragmentation chain transfer (RAFT) polymerization using 2-cyanoprop-2-yl-1-dithionaphthalate (CPDN) as RAFT agent. The polymerization behavior exhibited “living”/controlled characters. The obtained copolymer, poly(St-co-VBNPA), with pre-determinable molecular weight and narrow molecular weight distribution can be used as a carrier in metal ion detection and analysis via pre-concentration technique. The copolymer–metal ion (copper (Cu) and europium (Eu)) complexes were prepared and characterized.     

"JDS-音频化渣微机综合检测系统"的应用与效果

简要介绍“JDS-音频化渣微机综合检测系统”的工作原理和应用效果，证明使用该装置是提高炼钢操作水平的一条较好途径。     

西气东输工程用X70热轧板卷屈服强度检测值波动大的探讨

对西气东输工程用X70热轧板卷检验过程中出的屈服强度σ0.5波动大的情况进行了分析，认为拉伸试样弯曲是主要原因。这一问题可通过反复压平试样，确保试样的平直度以及适当提高钢的强度的方法加以解决。     

现场总线控制系统浅谈

简述了现场总线控制系统的结构及其显优点。现场总线控制系统的结构包括：主控器、总线接口、电源、输入／输出接点、总线电揽和终端电阻。另外对其显优点做了逐一介绍。现场总线控制系统可在工业自动化控制系统中推广应用。     

Studies on the treatment of brilliant green solution by combination microwave induced oxidation with CoFe2O4

In this work the synergistic effects of microwave (MW) irradiation induced oxidation processes and CoFe₂O₄ were studied for the degradation of brilliant green (BG) from aqueous solutions. Under the optimum condition, the ratio of solid to liquid was 1:167 (0.3 g CoFe₂O₄ mixed with 50 mL of 20 mg L⁻¹ BG solution), MW power 600 W, and the time of the irradiation 2 min. And the decolorization rate could reach up to 100%. Further investigation showed that BG was degraded by MW-induced oxidation combined with CoFe₂O₄ surface adsorption. The CoFe₂O₄ could increase the efficiencies of MW degradation and be used repeatedly. The experimental results indicated that the method of MW degradation BG in the presence of CoFe₂O₄ could reduce reaction time and increase product yield.     

Enhanced Topology Error Processing via Optimal Measurement Design

Topology errors constitute one of the significant source of problems for today's state estimators. They may cause significant biases in state estimation solutions and may occasionally lead to divergence of the numerical solution algorithms. Existing methods of detecting and identifying topology errors rely on the measurement residuals which are in turn dependent on the measurement configuration and network topology. Hence, the capability to effectively process topology errors is closely linked to proper measurement design. In particular, detection of a topology error associated with a given branch may or may not be possible depending upon the existing measurement configuration. Hence, it is possible to efficiently improve the topology error processing capability for a given system by strategically placing few extra measurements. In this paper, a systematic procedure will be developed in order to accomplish this by using not only the traditional power flow and injection measurements but also the newly emerging phasor measurement units (PMUs). Numerical examples will be provided in order to illustrate the proposed measurement placement strategy.      

基于网格的知识资源挖掘研究

为满足网络上不同用户群体对个性化资源的要求,文章从网格与服务网格的概念出发,引入知识挖掘技术,提出了网格环境下的个性化知识资源挖掘实现框架,并对其实现功能与应用加以分析.     

一种矿山用钢筋网自动化焊接生产线的设计

设计一条钢筋网自动化焊接生产线，包括经料送料平台、纬料自动分料及上料机构、多点电阻点焊机、接料平台、卸料机械手。从上料到出料依靠电机、汽缸之间的协调工作来实现。并由单片机和PLC实现控制功能，上位机用MCGS组态软件在整个过程监视现场，采集工作状态及参数，起到监控作用。