Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

我国重液蜡生产及市场前景

介绍了国内重液蜡生产现状和市场情况 ,阐述了异丙醇 -尿素脱蜡优于分子筛脱蜡工艺的几个特点 ,并介绍了重液蜡在塑料业、洗涤业、皮革业和微生物方面的发展方向。     

Modification of silk with aminated polyepichlorohydrin to improve dyeability with reactive dyes

Reactive dyes have almost complete exhaustion and ideal fixation on aminated polyepichlorohydrin pretreated silk without addition of salt or alkali. The effects of varying pretreatments and dyeing conditions were studied. The dyeing behaviour of CI Reactive Red 15 on modified silk under pH 6 was investigated. Dyeings of modified silk showed good wash fastness, dry and wet rub fastnesses as well as light fastness. The quality of the dyed silks obtained after pretreatment was shown to be satisfactory and the dyeing effluent was less polluted.     

骨架材料对全钢载重子午线轮胎性能的影响

讨论骨架材料的规格、结构分布及工艺控制对全钢载重子午线轮胎性能的影响。胎体帘布采用带有外缠丝的 3 + 9+ 15× 0 2 2 + 0 15规格钢丝、胎体帘线密度在 45 0～ 65 0根·m- 1 范围内 (帘线直径大于 1 2mm)以及胎体反包端点在成品外轮廓曲线的第 2或 3条装配线上等措施均有利于保证胎体强度 ;合理设计带束层结构 ,端点与胎侧肩部花纹距离取 10mm左右有利于消除应力过度集中 ;采用钢丝增强带有利于提高胎圈刚性。     

Study of the amination of fatty alcohols catalyzed by Cu−Ni catalysts

Amination of fatty alcohols by hydrogenation and dehydrogenation catalysis is one of the main commercial processes for the production of dimethylalkylamines. The key factor in this process is the preparation of catalysts with high selectivity. A study of amination catalyzed by Cu−Ni catalysts supported on CaCO₃ is reported in this paper. Selectivity of the catalysts was adjustable by varying the ratio of Cu to Ni or by adding a third element (Zn or Mg). The promotion of catalyst selectivity was mainly attributable to the effect of the components on the reducibility of Ni²⁺ in the catalysts. Lower reducibility of Ni²⁻ led to higher catalyst selectivity.     

HT-730改性酚醛-丁腈胶粘剂的研制

对酚醛-丁腈胶粘剂进行改性，添加5．0％的硅烷偶联剂，改善了酚醛-丁腈胶粘剂的工艺性能，提高了粘接强度，特别是降低了酚醛-丁腈胶对环境湿度的敏感性。研制的HT-730胶在环境湿度90％时仍有很高的粘接强度，同时老化性能和适用期并没有受到影响。     

粉末材料合成金刚石中工艺参数的选取

合理地选取工艺参数,有利于合成优质金刚石.文章综述了粉末材料合成金刚石中工艺参数对合成效果的影响以及粉末材料合成金刚石中工艺参数的选取原则.     

波节式换热管压缩失稳试验研究

通过对不同材料、直径和壁厚的波节式换热管进行压缩失稳试验,绘出应力和应变强度关系曲线,指出直光管经胀管成型为波节管后,应力状态分布明显不同于光管,壁厚和直径等规格尺寸的不同会影响波纹管的强度性能.     

An efficient mode decision algorithm for H.264/AVC intra prediction

Multimedia Tools and Applications - Rate distortion optimization technique is adopted by H.264/AVC to select the best intra and inter prediction modes. It achieves remarkable improvement in...     

黄荆提取物对几种害虫的杀虫活性

研究了黄荆种子二氯甲烷提取物对5种害虫的杀虫活性以及对天敌异色瓢虫的安全性。结果表明：黄荆提取物对菜青虫、小菜蛾、麦长管蚜和桃蚜都有较高的杀虫活性，尤其是对菜青虫的活性最高，稀释100倍，处理4龄幼虫死亡率可达93．3％。但对大猿叶甲的杀虫活性则很低。黄荆提取物对异色瓢虫幼虫有一定的杀虫活性，但对其成虫无任何影响。本研究结果为开发利用这一新的杀虫植物资源提供了依据。