A method for transformation of engineering bill of materials to maintenance bill of materials

In order to solve the transformation problem of Bill of Materials (BOM) from engineering BOM to maintenance BOM for Maintenance, Repair and Overhaul (MRO) systems, a formal transformation model of BOM view is proposed. In this model, the intermediate component, inherited component, virtual component are defined in the specific maintenance management domain, and the transformation process from engineering BOM to maintenance BOM is discussed through feature recognition methods and rules. The proposed transformation model has been developed and deployed in an MRO system for a steel manufacturing enterprise.     

应用免疫斑点法检测不同工艺灭活的乙肝血源疫苗中的前S_1和S_2蛋白

作者应用前 S_1、前 S_2和 HBsAg/a 单克隆抗体,用免疫斑点法(Immuno-spot)检测同一批的乙肝表面抗原分别经加热灭活和三步化学灭活后的前 S_1和前 S_2蛋白保留情况,比较了两种工艺对前 S_1和前 S_2蛋白的影响。结果表明;加热灭活可保留前 S_1和前 S_2蛋白,三步化学灭活使前 S_1和前 S_2蛋白丢失,从抗原组成上看,加热灭活后的抗原更接近自然抗原。首次报告了含有前 S_1蛋白的乙肝疫苗,并对前 S_1和前 S_2蛋白在乙肝血源疫苗中的可能作用进行了讨论。     

Thermotropic polyester carbonates. III. Thermotropic polyester carbonates as self-reinforced plastics

Thermotropic polyester carbonates derived from t-butylhydroquinone, methylhydroquinone, diphenyl terephthalate, and diphenyl carbonate in the molar ratio of 50 : 50 : 55 : 45; 50 : 50 : 57.5 : 5 : 42.5 and 50 : 50 : 60 : 40 can be injection molded successfully from temperatures 10°C below melting to 30–40°C above melting. Normally the best molding temperatures are 10–20°C above melting. If the molding conditions are controlled properly, tensile strengths as high as 1.8 × 10⁴ psi, tensile moduli as high as 7.4 × 10⁵ psi, and flex moduli as high as 1.1 × 10⁶ psi can be obtained.     

Graft polymerization of vinyl acetate onto granular starch: Comparison on the potassium persulfate and ceric ammonium nitrate initiated system

This work was undertaken to discuss in depth the vital differences in the morphological development during synthesis, and properties of starch‐g‐poly‐(vinyl acetate) copolymers using two different initiators, potassium persulfate (KPS) and ceric ammonium nitrate (CAN). KPS‐initiated system gave relatively low values of grafting ratio and grafting efficiency, indicating a great tendency for the formation of poly(vinyl acetate) homopolymer (PVAc). Yet, higher values were seen for the CAN‐initiated system. Transmission electron microscope observations indicated a relatively broad distribution of latex particles for the KPS‐initiated system. The surface potential of latex particles was about ?3.5 mV, which turned out to be insufficient to maintain stability of latex particles. On the other hand, a uniform particle size distribution was found for the CAN‐initiated system, as the surface potential of latex particles was 21.5 mV. Moreover, radicals on starch molecules were generated directly through a redox reaction with positively charged ceric ion. The hydrophobic PVAc chains were thus grafted on starch, resulting in an amphiphilic graft copolymer, which provides a sufficient stabilization degree as a role of surfactant to render a relatively uniform distribution of latex particles. The synthesized starch‐g‐poly(vinyl acetate) copolymers were further converted to starch‐g‐poly(vinyl alcohol) through saponification, which were subjected to evaluations regarding the biodegradation and cell culture capability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3017–3027, 2006     

Design and control of reactive distillation for ethyl and isopropyl acetates production with azeotropic feeds

Reactive distillations for the production of ethyl acetate (EtAc) and isopropyl acetate (IPAc) are classified as the type-II process where the first column consists of a reactive zone and a rectifying section followed by a stripper [Tang et al., 2005. Design of reactive distillations for acetic acid esterification with different alcohols. A.I.Ch.E. Journal 51, 1683-1699]. Instead of using pure alcohols and acetic acid as reactants, this paper studies the effects of reactant purity on the design and control of reactive distillation. This offers significant economical incentives (by reducing raw materials costs), because ethanol forms an azeotrope with water at 90 mol% and isopropanol/water has an azeotrope at 68%. The purities of the acid is set to 95% for acetic acid (industrial grade), 87% for ethanol, and 65% for isopropanol. The results show that the total annual costs (TAC) increase by a factor of 5% for EtAc and 8% for IPAc production using reactive distillation. Next, the operability of the reactive distillations with azeotrope feeds is explored. Three disturbances, feed flow, acid feed purity, and alcohol feed composition, are introduced to assess control performance using dual-temperature control and one-temperature-one-composition control. Simulation results indicate good control performance can be achieved for reactive distillation with azeotropic feeds.     

关于化工工艺学教学改革的探讨

本文从强化课堂教学、加强实践与理论教学相结合以及强化学生工程观念等方面对《化工工艺学》课程教学方法的改革进行了探讨,提高了教学质量和教学效果,为更好地培养具有较强综合能力的化工工艺专业合格人才提供了重要保证。     

From a theoretical model to a predictive simulation model of operator interaction with support systems: designing experiments to build the numerical simulation

In this paper, we will discuss a methodology developed and applied in the European ITERATE project with the objective of designing experiments that will provide data to seed the numerical model of operator behaviour in different surface transport modes: road vehicles, rail transport and ships. The experiments aim to investigate how new technologies support different types of operators in different contexts. A structured approach was adopted. Firstly, an initial selection of the systems to be investigated was made, describing the support they provide for operators. Hypotheses were formulated on the effects of operator parameters on the interaction with the systems. A final selection of systems for the experiments was made, focusing on systems providing support for collision avoidance and speed management. The operator parameters (culture, attitude and personality, experience, driver state (such as fatigue) and the demands of the task) were operationalised and piloted. The next step was the development of scenarios to be implemented in a driving simulator. In the last step, the final experiments were designed and detailed.     

The effect of end groups of PEG on the crystallization behaviors of binary crystalline polymer blends PEG/PLLA

The effect of end groups (2OH, 1OH, 1CH₃ and 2CH₃) of poly(ethylene glycol) (PEG) on the miscibility and crystallization behaviors of binary crystalline blends of PEG/poly(l-lactic acid) (PLLA) were investigated by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). A single glass-transition temperature was observed in the DSC scanning trace of the blend with a weight ratio of 10/90. Besides, the equilibrium melting point of PLLA decreased with the increasing PEG. A negative Flory interaction parameter, χ₁₂, indicated that the PEG/PLLA blends were thermodynamically miscible. The spherulitic growth rate and isothermal crystallization rate of PEG or PLLA were influenced when the other component was added. This could cause by the change of glass transition temperature, T_g and equilibrium melting point, T⁰_m. The end groups of PEG influenced the miscibility and crystallization behaviors of PEG/PLLA blends. PLLA blended with PEG whose two end groups were CH₃ exhibited the greatest melting point depression, the most negative Flory interaction parameter, the least fold surface free energy, the lowest isothermal crystallization rate and spherulitic growth rate, which meant better miscibility. On the other hand, PLLA blended with PEG whose two end groups were OH exhibited the least melting point depression, the least negative Flory interaction parameter, the greatest fold surface free energy, the greatest isothermal crystallization rate and spherulitic growth rate.     

基于VB的球面网壳施工控制系统设计

根据球面网壳的施工特点,采用VB6.0编制了球面网壳施工控制系统。根据系统的数据特点,采用MicrosoftExcel作为数据库。使用OLE控件调用AutoCAD软件,绘制三维结构模型图。使用Image控件和Line控件设计工具栏。系统根据施工误差对施工时可能出现的问题进行预警,有利于提高球面网壳的施工质量。     

Spherical Aluminum Nitride Fillers for Heat-Conducting Plastic Packages

It is necessary for encapsulants to have not only a suitable coefficient of thermal expansion (CTE) compatible to IC devices and a low dielectric constant to reduce the device propagation delay, but also a high thermal conductivity to dissipate large amounts of heat from power-hungry, high-speed IC and high-density packages. Fillers such as silica have been mixed with polymers to improve their properties. Aluminum nitride (AlN) is considered as an alternative one, because it has a higher theoretical thermal conductivity of ∼320 W/mK¹, a compatible CTE with silicon chips and a low dielectric constant. Commercial AlN fillers are angular in shape, because they are prepared via grinding coarse AlN powders synthesized by direct nitridation of aluminum metal and classification. The angular AlN are not expected to have high fluidity when mixed with polymers and hence low packing density. Recently, we successfully obtained single-crystalline spherical AlN fillers. Furthermore, polymer composites filled with the spherical AlN showed excellent thermal conductivity (>8 W/mK) as encapsulants for dissipating the heat generated in electronic devices.