Cuckoo Search Based Optimization of Multiuser Cognitive Radio System Under the Effect of Shadowing

Shadow fading is one of the least investigated factors of received signal power in a typical wireless communication system. Variations in the received power caused by shadowing events can impose some serious changes in the communication. This paper, proposes a new multiuser cognitive radio system in shadowing environment and its design optimization using cuckoo search algorithm. The transmission parameters of multiple secondary users in the purposed CR model are considered on the basis of IEEE 802.22 WRAN standard. An attempt to optimize these parameters in shadowing environment to achieve multiple objectives for desired quality of service have been made using a relatively newer and simpler cuckoo search algorithm. The optimization results have been compared with another efficient biogeography based optimization technique and the traditional simulated annealing.     

Cross-Layer Optimization of Dynamic Packet Assignment for Video Transmission Over IEEE 802.11e Networks

Video transmission over IEEE 802.11e wireless networks still shows poor performance for large bandwidth demand and frequently changed environments. Thus, several enhancements of IEEE 802.11e were proposed. On the other hand, big frames and simultaneous sending of adjacent frames always cause packet dropping for buffer overflow. In the past, we proposed an IEEE 802.11e enhancement named DFAA and a content aware mechanism to solve the above problems. The motivation of this paper is to find a proper way to integrate these two mechanisms. A DFAA enhancement (DFAA-E) is proposed to make up the insufficiency of content aware mechanism. Experiments results show that the combination of DFAA-E and content aware mechanism improves the video decoded quality greatly. And its performance can be further enhanced by selecting the suitable settings of certain parameters.     

Interference Evaluation in Cellular Networks

Interference in cellular networks is one of the most common problems in the radio access network. In fact, it is the major issue in cellular networks that affects performances and quality of service. Indeed, interference can be caused by a call on the same frequency from neighboring cell, or a call on an adjacent channel in the same or in neighboring cell. So, we can classify interference on intra-cell interference and inter-cell interference. In 4G, thanks to the use of orthogonal frequency division multiple access and single carrier frequency division multiple access as access techniques in downlink and uplink respectively, intra-cell interference is reduced compared to the inter cell one which caused by the frequency reuse one mechanism and the femto cells deployment. In this work, we will evaluate the interference in different cellular network standards from 2G to 4G.     

High-Temperature Formation Phases and Crystal Structure of Hot-Pressed Thermoelectric CuGaTe<Subscript>2</Subscript> with Chalcopyrite-Type Structure

Polycrystalline CuGaTe₂ with a chalcopyrite-type structure consolidated by hot-pressing is a potential candidate as a medium-temperature thermoelectric (TE) material. However, its high-temperature formation phases have rarely been reported to date. Here, we investigated the temperature-dependent formation phases and crystal structure at 300–800 K of hot-pressed CuGaTe₂. From synchrotron x-ray diffraction data and crystal structure analysis of the heating and cooling processes, it was clarified that a certain amount of impurity phases, such as Te and CuTe, precipitated from the CuGaTe₂ matrix when the temperature was increased (to 500–650 K). This is the temperature range where CuGaTe₂ has been reported to show high TE performance. After CuGaTe₂ was heated to 800 K, such impurity phases remained, even when cooled to room temperature. They also affected the tetragonal distortion and the x-coordinate of Te in the CuGaTe₂ matrix, probably due to deficiencies of Cu and Te in the matrix. Our results reveal detailed information on the formation phases of CuGaTe₂ at high temperature and thus provide insight for evaluation of its high-temperature stability and transport properties.     

Analyzing the Boundary Thermal Resistance of Epitaxially Grown Fe<Subscript>2</Subscript>VAl/W Layers by Picosecond Time-Domain Thermoreflectance

To gain deep insight into the mechanism of phonon scattering at grain boundaries, we investigated the boundary thermal resistance by using picosecond pulsed-laser time-domain thermoreflectance for epitaxially grown W/Fe₂VAl/W films. By using radio-frequency magnetron sputtering, we prepared a series of the three-layer films whose Fe₂VAl thickness ranged from 1 nm to 37 nm. The fine oscillation of reflectivity associated with the top W layer clearly appeared in synchrotron x-ray reflectivity measurements, indicating a less obvious mixture of elements at the boundary. The areal heat diffusion time, obtained from the time-domain thermoreflectance signal in the rear-heating front-detection configuration, reduced rapidly in samples whose Fe₂VAl layer was thinner than 15 nm. The ～ 10% mismatch in lattice constant between Fe₂VAl and W naturally produced the randomly distributed lattice stress near the boundary, causing an effective increase of boundary thermal resistance in the thick samples, but the stress became homogeneous in the thinner layers, which reduced the scattering probability of phonons.     

Special Important Aspects of the Thomson Effect

A comprehensive study of the mechanisms of heating and cooling originating from an electrical current in semiconductor devices is reported. The variation in temperature associated with the Peltier effect is not related to the presence of heat sources and sinks if the heat flux is correctly determined. The Thomson effect is commonly regarded as a heat source/sink proportional to the Thomson coefficient, which is added to the Joule heating. In the present work, we will show that this formulation of the Thomson effect is not sufficiently clear. When the heat flux is correctly defined, the Thomson heat source/sink is proportional to the Seebeck coefficient. In the conditions in which the Peltier effect takes place, the temperature gradient is created, and, consequently, the Thomson effect will occur naturally.     

Tunable Thermoelectric Performance in Porous Armchair Graphene Nanoribbons as a Function of Strain,Pore Morphology and Temperature

In this paper, the thermoelectric performance of porous armchair graphene nanoribbons under tensile and compressive strain is investigated as a function of pore morphology and temperature. For all the porous structures irrespective of their pore size, the performance improves at a compressive strain of 10%, while for tensile nature, the minimum cut-off strain required for improved thermoelectric figure of merit (ZT) shows an inverse relation with the pore size. In addition, optimal pore shape geometry can yield better performance, even at lower values of strain. Further analysis reveals that tensile strain is not able to improve the performance at low and intermediate temperatures of around 300 K, whereas tensile/compressive strain is effective in enhancing the performance of porous armchair graphene nanoribbons at higher temperatures. Furthermore, the structures are found to be more sensitive to compressive strain than the tensile one since the effect of compressive strain is found to improve ZT more significantly. Our analysis based on Non-Equilibrium Green’s function calculations suggests a possible route for tailoring the functionality of nanomaterials so as to achieve great potentials for thermoelectric applications at various temperatures.     

Characterization of Double-Junction GaAsP Two-Color LED Structure

The structural, optical, electrical and electrical–optical properties of a double-junction GaAsP light-emitting diode (LED) structure grown on a GaP (100) substrate by using a molecular beam epitaxy technique were investigated. The p–n junction layers of GaAs_1?xP_x and GaAs_1?yP_y, which form the double-junction LED structure, were grown with two different P/As ratios. High-resolution x-ray diffraction (HRXRD), photoluminescence (PL), and current–voltage (I–V) measurements were used to investigate the structural, optical and electrical properties of the sample. Alloy composition values (x, y) and some crystal structure parameters were determined using HRXRD measurements. The phosphorus compositions of the first and second junctions were found to be 63.120% and 82.040%, respectively. Using PL emission peak positions at room temperature, the band gap energies (E_g) of the first and second junctions were found to be 1.867 eV and 2.098 eV, respectively. In addition, the alloy compositions were calculated by Vegard’s law using PL measurements. The turn-on voltage (V_on) and series resistance (R_s) of the device were obtained from the I–V measurements to be 4.548 V and 119 Ω, respectively. It was observed that the LED device emitted in the red (664.020 nm) and yellow (591.325 nm) color regions.     

Reordering for improving global Arnoldi–Tikhonov method in image restoration problems

This paper discusses the solution of large-scale linear discrete ill-posed problems arising from image restoration problems. Since the scale of the problem is usually very large, the computations with the blurring matrix can be very expensive. In this regard, we consider problems in which the coefficient matrix is the sum of Kronecker products of matrices to benefit the computation. Here, we present an alternative approach based on reordering of the image approximations obtained with the global Arnoldi–Tikhonov method. The ordering of the intensities is such that it makes the image approximation monotonic and thus minimizes the finite differences norm. We present theoretical properties of the method and numerical experiments on image restoration.     

Highly accurate frequency estimation of brief duration signals in noise

A highly accurate frequency estimation providing suppression of windowing effects, denoising performances and frequency resolutions in excess of Gabor–Heisenberg limit, is proposed for brief duration signals. It is shown that unbiased frequency estimation with vanishing frequency variances is achieved far below Cramer–Rao lower bound when signal-to-noise ratio reaches vicinity of threshold values. Observed performances provide novel and valuable perspectives for efficient and accurate frequency estimation for brief duration signals in noise.