Formation of interfacial brittle phases sigma phase and IMC in hybrid titanium-to-stainless steel joint

The microstructures of the brazed joints for commercially pure Ti and stainless steel were investigated by the applications of various filler alloys including Ag-, Ti-, Zr- and Ni-based alloys. Generally, the dissimilar joints between Ti and stainless steel were dominated by the Ti-based intermetallic compounds (IMCs), e.g. (Ti, Zr)2(Fe, Ni), TiFe, TiCu, and Ti2(Fe, Ni), due to a significant dissolution of Ti from the base metal. The (Fe-Cr) σ phase was also observed near the stainless steel due to a segregation of Cr into the interface region. This research demonstrates empirically that the brittleness of the Ti and stainless steel joint can not be avoided only by applying single braze alloy or single insert metal, and thus an introduction of additional suitable interlayer between the filler alloy and the base metal is necessary to prevent the brittleness of the joint.     

Optical diffraction gratings embedded in BK-7 glass by low-density plasma formation using femtosecond laser

The optical embedded diffraction gratings with the internal refractive index modification in BK-7 glass plates were demonstrated using low-density plasma formation excited by a high-intensity femtosecond (130 fs) Ti: sapphire laser (λp=790 nm). The refractive index modifications with diameters ranging from 400 nm to 4 μm were photoinduced after plasma formation occurred upon irradiation with peak intensities of more than 1×1013 W/cm2. The graded refractive index profile was fabricated to be a symmetric around the center of the point at which low-density plasma occurred. The maximum refractive index change (Δn) was estimated to be 1.5×10-2. Several optical embedded gratings in BK-7 glass plate were demonstrated with refractive index modification induced by the scanning of low-density plasma formation.     

Fabrication of cast carbon steel with ultrafine TiC particles

The carbon steels dispersed with ultrafine TiC particles were fabricated by conventional casting method. The casting process is more economical than other available routes for metal matrix composite production, and the large sized components to be fabricated in short processing time. However, it is extremely difficult to obtain uniform dispersion of ultrafine ceramic particles in liquid metals due to the poor wettability and the specific gravity difference between the ceramic particle and metal matrix. In order to solve these problems, the mechanical milling (MM) and surface-active processes were introduced. As a result, Cu coated ultrafine TiC powders made by MM process using high energy ball milling machine were mixed with Sn powders as a surfactant to get better wettability by lowering the surface tension of carbon steel melt. The microstructural investigations by OM show that ultrafine TiC particles are distributed uniformly in carbon steel matrix. The grain sizes of the cast matrix with ultrafine TiC particles are much smaller than those without ultrafine TiC particles. This is probably due to the fact that TiC particles act as nucleation sites during solidification. The wear resistance of cast carbon steel composites added with MMed TiC/Cu-Sn powders is improved due to grain size refinement.     

Adaptive characterization of recrystallization kinetics in IF steel by electron backscatter diffraction

In this study, a rigorous methodology for quantifying recrystallization kinetics by electron backscatter diffraction is proposed in order to reduce errors associated with the operator's skill. An adaptive criterion to determine adjustable grain orientation spread depending on the recrystallization stage is proposed to better identify the recrystallized grains in the partially recrystallized microstructure. The proposed method was applied in characterizing the microstructure evolution during annealing of interstitial‐free steel cold rolled to low and high true strain levels of 0.7 and 1.6, respectively. The recrystallization kinetics determined by the proposed method was found to be consistent with the standard method of Vickers microhardness. The application of the proposed method to the overall recrystallization stages showed that it can be used for the rigorous characterization of progressive microstructure evolution, especially for the severely deformed material.     

Internal modification in transparent hybrid germanium-silica plates using plasma formation induced by a femtosecond laser

The fabrication of an internal diffraction grating with photoinduced refractive index modification in planar hybrid germanium-silica plates was demonstrated using low-density plasma formation excited by a high-intensity femtosecond (150 fs) Ti:sapphire laser (λp=790 nm).The refractive index modifications with diameters ranging from 400 nm to 3 μm were photoinduced after plasma formation occurred upon irradiation with peak intensities of more than 2×1013 W/cm2.The graded refractive index profile was fabricated to be a symmetric around from the center of the point at which low-density plasma occurred.     

5083-H116铝合金在气蚀条件下的恒电位腐蚀防护技术

研究铝合金5083-H116在海水中的气蚀损伤行为特征,以期提高合金的耐气蚀性能。通过在不同电位条件下进行的恒电位实验,确定抑制气蚀损伤的最优保护电位。实验在电位为-2.2--1.4 V的范围内进行,这对应于铝合金5083-H116阴极极化曲线上的浓差极化和活化极化区域。对实验获得的电流密度-时间曲线进行研究,通过三维显微镜和扫描电子显微镜分析合金表面的损伤情况。结果表明,合金的最优保护电位为-1.9--1.5 V,在此电位条件下,合金的气蚀损伤得到显著地减轻。     

Differential Scanning Calorimetry of Fish Muscle: The Effect of Processing and Species Variation

Differential Scanning Calorimetry (DSC) has been used to study the thermal properties of fish muscle proteins and to measure the extent of their denaturation under various processing conditions. Fish myosin was susceptible to denaturation by frozen storage and dehydration. Denaturation of certain fish proteins was partially reversible. Although fish myosin was very unstable, its thermal stability was found to increase in species adapted, to higher environmental temperatures.     

Theory of a slow wave cyclotron amplifier

A new type of travelling wave amplifier is proposed which features a slow wave structure and wide bandwidth operation. It is bused on the cyclotron interaction between a slow electromagnetic wave and helically moving electrons. Gain and bandwidths are calculated including the effect of beam velocity spread. It is shown that a bandwidth as high as 50% could be achieved with beam velocity spread?1%.     

Preparation and antibacterial activity of chitosan microshperes in a solid dispersing system

In this study, we investigated the interface contacting inhibition behaviors of chitosan against bacterial in the dispersing state. For that purpose, chitosan microspheres (CMs) in the dispersing state was prepared by the emulsification cross-linking method. The CMs had smooth surface and spherical shape with the diameter of about 124 ?m. They were stable after sterilization at 121°C and 150 kPa for 20 min. The CMs had similar antibacterial activity to that of chitosan in the solution form. Their antibacterial activities increased with the increase of the CM concentration, while decreased with the increase of pH of the system. It was found that the CMs with the degree of deacetylation (DD) of 63.6% exhibited the highest antibacterial activity, while the CMs with the DD of 83.7% exerted the lowest antibacterial activity among the three tested samples.