Online Mesh Refinement for Parallel Atmospheric Models

Forecast precisions of climatological models are limited by computing power and time available for the executions. As more and faster processors are used in the computation, the resolution of the mesh adopted to represent the Earth’s atmosphere can be increased, and consequently the numerical forecast is more accurate. However, a finer mesh resolution, able to include local phenomena in a global atmosphere integration, is still not possible due to the large number of data elements to compute in this case. To overcome this situation, different mesh refinement levels can be used at the same time for different areas of the domain. Thus, our paper evaluates how mesh refinement at run time (online) can improve performance for climatological models.The online mesh refinement (OMR) increases dynamically mesh resolution in parts of a domain,when special atmosphere conditions are registered during the execution. Experimental results show that the execution of a model improved by OMR provides better resolution for the meshes, without any significant increase of execution time. The parallel performance of the simulations is also increased through the creation of threads in order to explore different levels of parallelism.     

Quantitative atomic 3-D imaging of single/double sheet graphene structure

Graphene sheets can be regarded as base structure of many carbon nanostructures, and atomic arrangements and variations in the atomic structure have a drastic impact on their unique properties. Using a single/double layer graphene model structure, we present a strategy to “see” single carbon atoms in 3-D. In high-resolution transmission electron microscopy, exit-wave images are essential to obtain and to understand 3-D atomic structure. Using electrons at 80 kV not only minimizes the knock-on damage, but also improves the detection sensitivity due to the higher scattering power of carbon at lower acceleration voltage of the electron. Using experiments and image simulations, positions of individual carbon atoms in a single/double layer structure in graphene have been identified.     

Starch Granules in Arabidopsis thaliana Mesophyll and Guard Cells Show Similar Morphology but Differences in Size and Number

Transitory starch granules result from complex carbon turnover and display specific situations during starch synthesis and degradation. The fundamental mechanisms that specify starch granule characteristics, such as granule size, morphology, and the number per chloroplast, are largely unknown. However, transitory starch is found in the various cells of the leaves of Arabidopsis thaliana, but comparative analyses are lacking. Here, we adopted a fast method of laser confocal scanning microscopy to analyze the starch granules in a series of Arabidopsis mutants with altered starch metabolism. This allowed us to separately analyze the starch particles in the mesophyll and in guard cells. In all mutants, the guard cells were always found to contain more but smaller plastidial starch granules than mesophyll cells. The morphological properties of the starch granules, however, were indiscernible or identical in both types of leaf cells.     

Water Concession Principles for Geothermal Aquifers in the Mura-Zala Basin,NE Slovenia

Demand for thermal water in the Mura-Zala basin, situated between Slovenia, Austria, Hungary and Croatia, is constantly increasing, with the sandy geothermal aquifer within the Neogene Mura formation being the most exploited. During the water concession granting process various problems were identified, together with the need for elaboration of the uniform concession granting principles. The latter were devised according to the specific hydrogeological settings and field inspection of 23 geothermal wells, performed through use of an adapted methodology. The inspection revealed changes in wells performance, low efficiency of energy abstraction and a lack of reinjection. The acquired information was applied to the development of particular principles, including the six key indicators. Firstly, a unified and integrated operational monitoring programme must be established, and upgraded by a national surveillance monitoring. Secondly, an application of the best available techniques is proposed. Stimulation of energetic and balneology efficiency is also needed, with recharge and reinjection conditions evaluated and applied where possible. Limited or full water concessions could be granted based on their fulfilment then. This continuous step-by-step approach should enable the implementation of adequate measures to meet the standards required for the thermal groundwater bodies according to the EU water framework directions.     

Ceramic Diesel Particulate Filters

Twenty-five years of diesel particulate filter (DPF) developments have shown that ceramic materials are well-suited candidates to fulfill the harsh requirements of exhaust after treatment. The introduction of DPF in passenger cars in Europe in 2000 was a real breakthrough from both a scientific and a commercial point of view. Different systems and filter materials can be used as DPF; however, at the moment silicon carbide wall flow filters seem to be at advantage. There is a continual demand for cost-effective and reliable materials and systems forced by increasing legal emission standards.     

A 64 kbit/s Videophone codec with forward analysis and control

A new combination of coding methods for a 64 kbit/s transmission system for typical videophone situations is investigated. The codec structure is based on a standard hybrid discrete cosine transform (DCT) codec with temporal prediction. The picture is divided blockwise into changed and unchanged areas. One motion vector with subpel accuracy is computed and transmitted for each block of the changed area. For the forward analysis, the prediction error is calculated in the whole picture. Only the blocks with the highest prediction errors are updated by a DCT with a perception adaptive quantization. The number of DCT update blocks depends on the remaining bits after the transmission of the overhead information. The codec is controlled by a forward analysis of the prediction error and is not based on a buffer control. The spatial resolution of the source signal is reduced in two steps to prevent a codec overload caused by too much activity between two frames.     

Effect of thiophene donor units on the optical and photovoltaic behavior of fluorene-based copolymers

A series of novel conjugated polymers containing alternating electron-donating and electron-accepting units based on 9,9-dioctylfluorene, 4,7-dithienyl-2-yl-2,1,3-benzothiadiazole, and (oligo)thiophene were synthesized. The polymers were synthesized by the Suzuki cross-coupling polymerization of 9,9-dioctylfluorene-2,7-diboronic acid and 4,7-di(2-bromothien-5-yl)-2,1,3-benzothiadiazole with dibromo(oligo)thiophene (thiophene, bithiophene, and terthiophene). Optical properties of the copolymers were highly dependent on the length of the (oligo)thiophene unit. With the incorporation of three thiophene units in the polymer backbone, the copolymer absorption covers a broad range of the visible spectrum from 300 to 700 nm. The band gap energies derived from the absorption edge of the thin film spectra were in the range of 1.83-1.94 eV. The photovoltaic performance increases as the length of the (oligo)thiophene segments in the polymer backbone increases. The best performance of photovoltaic device was obtained by PFTBzTTT as the electron donor material with PCE of 1.25% under an AM 1.5 solar simulator.     

Lubricant Effects on White Etching Cracking Failures in Thrust Bearing Rig Tests

Abstract

White etching cracking (WEC) is a subsurface bearing failure mechanism influenced by a number of factors, including lubricant composition. Certain metal-containing lubricants have been reported to promote WEC-induced failure; however, the exact mechanisms linking lubricant effects on WEC propensity are still not fully understood. An interesting field that has not been elucidated is the influence of additive concentration and tribofilm growth on WEC initiation, propagation, and failure. The investigations conducted in this work involved two series of oil formulations: one with additives that give rise to WEC (WEC oils) in different combinations and concentrations and another with additives that do not cause WEC (non-WEC oils). A mini traction machine (MTM) in combination with a spacer layer imaging machine (SLIM) was employed to study the growth of tribofilms and their influence on friction response. Insights from the MTM-SLIM study allowed for better interpretation of FE8 bearing tests. When using oils that contribute to WEC formation, the tribofilm-induced WEC mechanism was confirmed, with cracks initiating as early as after 20 h of FE8 testing. Metal-containing additives were found to favor the formation of WECs by generating a high-friction tribofilm and increasing the water content in the lubricant. Furthermore, the source of subsurface H associated with WEC failure is investigated using heavy water (D2O)-saturated oil. A mechanism of water dissociation induced in tribofilm growth (incubation period) is proposed in this article.     

Genome-Wide Investigation of Multifocal and Unifocal Prostate Cancer—Are They Genetically Different?

Prostate cancer is widely observed to be biologically heterogeneous. Its heterogeneity is manifested histologically as multifocal prostate cancer, which is observed more frequently than unifocal prostate cancer. The clinical and prognostic significance of either focal cancer type is not fully established. To investigate prostate cancer heterogeneity, the genetic profiles of multifocal and unifocal prostate cancers were compared. Here, we report observations deduced from tumor-tumor comparison of copy number alteration data of both focal categories. Forty-one fresh frozen prostate cancer foci from 14 multifocal prostate cancers and eight unifocal prostate cancers were subjected to copy number variation analysis with the Affymetrix SNP 6.0 microarray tool. With the investigated cases, tumors obtained from a single prostate exhibited different genetic profiles of variable degrees. Further comparison identified no distinct genetic pattern or signatures specific to multifocal or unifocal prostate cancer. Our findings suggest that samples obtained from multiple sites of a single unifocal prostate cancer show as much genetic heterogeneity and variability as separate tumors obtained from a single multifocal prostate cancer.     

Thermophysical and Microstructural Studies on Thermally Sprayed Tungsten Carbide-Cobalt Coatings

The development of new hardmetal coating applications such as fatigue-loaded parts, structural components, and tools for metal forming is connected with improvement of their performance and reliability. For modelling purposes, the knowledge of thermophysical, mechanical, and other material data is required. However, this information is still missing today. In this study, the thermophysical data of a WC-17Co coating sprayed with a liquid-fuelled HVOF-process from a commercial agglomerated and sintered feedstock powder from room temperature up to 700 °C was determined as an example. The dependence of the heat conductivity on temperature was obtained through measurement of the coefficient of thermal expansion, the specific heat capacity, and the thermal diffusivity. Heat conductivities ranging from 29.2 W/(mK) at 50 °C to 35.4 W/(mK) at 700 °C were determined. All measurements were performed twice (as-sprayed and after the first thermal cycle) to take into account the structural and compositional changes. Extensive XRD and FESEM studies were performed to characterize the phase compositions and microstructures in the as-sprayed and heat-treated states. Bulk samples obtained by spark plasma sintering from the feedstock powder were studied for comparison.