Spinel-layered integrate structured nanorods with both high capacity and superior high-rate capability as cathode material for lithium-ion batteries

Spinel phase LiMn2O4 was successfully embedded into monoclinic phase layeredstructured Li2MrnO3 nanorods,and these spinel-layered integrate structured nanorods showed both high capacities and superior high-rate capabilities as cathode material for lithium-ion batteries (LIBs).Pristine Li2MnO3 nanorods were synthesized by a simple rheological phase method using α-MnO2 nanowires as precursors.The spinel-layered integrate structured nanorods were fabricated by a facile partial reduction reaction using stearic acid as the reductant.Both structural characterizations and electrochemical properties of the integrate structured nanorods verified that LiMn2O4 nanodomains were embedded inside the pristine Li2MnO3 nanorods.When used as cathode materials for LIBs,the spinel-layered integrate structured Li2MnO3 nanorods (SL-Li2MnO3) showed much better performances than the pristine layered-structured Li2MnO3 nanorods (L-Li2MnO3).When charge-discharged at 20 mA·g-1 in a voltage window of 2.0-4.8 V,the SL-Li2MnO3 showed discharge capadties of 272.3 and 228.4 mAh.g-1 in the first and the 60th cycles,respectively,with capacity retention of 83.8％.The SL-Li2MnO3 also showed superior high-rate performances.When cycled at rates of 1 C,2 C,5 C,and 10 C (1 C =200 mA·g-1) for hundreds of cycles,the discharge capacities of the SL-Li2MnO3 reached 218.9,200.5,147.1,and 123.9 mAh·g-1,respectively.The superior performances of the SL-Li2MnO3 are ascribed to the spineMayered integrated structures.With large capacities and superior high-rate performances,these spinel-layered integrate structured materials are good candidates for cathodes of next-generation high-power LIBs.     

Monolithically integrated CoP nanowire array: An on/off switch for effective on-demand hydrogen generation via hydrolysis of NaBH<Subscript>4</Subscript> and NH<Subscript>3</Subscript>BH<Subscript>3</Subscript>

The issues of hydrogen generation and storage have hindered the widespread use and commercialization of hydrogen fuel cell vehicles.It is thus highly attractive,but the design and development of highly active non-noble-metal catalysts for on-demand hydrogen release from alkaline NaBH4 solution under mild conditions remains a key challenge.Herein,we describe the use of CoP nanowire array integrated on a Ti mesh (CoP NA/Ti) as a three-dimensional (3D) monolithic catalyst for efficient hydrolytic dehydrogenation of NaBH4 in basic solutions.The CoP NA/Ti works as an on/off switch for on-demand hydrogen generation at a rate of 6,500 mL/(min.g) and a low activation energy of 41 kJ/mol.It is highly robust for repeated usage after recycling,without sacrificing catalytic performance.Remarkably,this catalyst also performs efficiently for the hydrolysis of NH3BH3.     

Shape design of cerium oxide nanoparticles for enhancement of enzyme mimetic activity in therapeutic applications

Cerium oxide nanoparticles (CONPs), widely used in catalytic applications owing to their robust redox reaction, are now being considered in therapeutic applications based on their enzyme mimetic properties such as catalase and super oxide dismutase (SOD) mimetic activities. In therapeutic applications, the emerging demand for CONPs with low cytotoxicity, high cost efficiency, and high enzyme mimetic capability necessitates the exploration of alternative synthesis and effective material design. This study presents a room temperature aqueous synthesis for low-cost production of shape-selective CONPs without potentially harmful organic substances, and additionally, investigates cell viability and catalase and SOD mimetic activities. This synthesis, at room temperature, produced CONPs with particular planes: {111}/{100} nanopolyhedra, {100} nano/submicron cubes, and {111}/{100} nanorods that grew in [110] longitudinal direction. Enzymatic activity assays indicated that nanopolyhedra with a high concentration of Ce⁴⁺ ions promoted catalase mimetic activity, while nanocubes and nanorods with high Ce³⁺ ion concentrations enhanced SOD mimetic activity. This is the first study indicating that shape and facet configuration design of CONPs, coupled with the retention of dominant, specific Ce valence states, potentiates enzyme mimetic activities. These findings may be utilized for CONP design aimed at enhancing enzyme mimetic activities in therapeutic applications.

Open image in new window

     

Transformation of monolayer MoS<Subscript>2</Subscript> into multiphasic MoTe<Subscript>2</Subscript>: Chalcogen atom-exchange synthesis route

Molybdenum ditelluride (MoTe2),which is an important transition-metal dichalcogenide,has attracted considerable interest owing to its unique properties,such as its small bandgap and large Seebeck coefficient.However,the batch production of monolayer MoTe2 has been rarely reported.In this study,we demonstrate the synthesis of large-domain (edge length exceeding 30 μm),monolayer MoTe2 from chemical vapor deposition-grown monolayer MoS2 using a chalcogen atom-exchange synthesis route.An in-depth investigation of the tellurization process reveals that the substitution of S atoms by Te is prevalently initiated at the edges and grain boundaries of the monolayer MoS2,which differs from the homogeneous selenization of MoS2 flakes with the formation of alloyed Mo-S-Se hybrids.Moreover,we detect a large compressive strain (approximately-10％) in the transformed MoTe2 lattice,which possibly drives the phase transition from 2H to 1T'at the reaction temperature of 500 ℃.This phase change is substantiated by experimental facts and first-principles calculations.This work introduces a novel route for the templated synthesis of two-dimensional layered materials through atom substitutional chemistry and provides a new pathway for engineering the strain and thus the intriguing physics and chemistry.     

Epitaxial growth of large-area and highly crystalline anisotropic ReSe<Subscript>2</Subscript> atomic layer

The anisotropic two-dimensional (2D) layered material rhenium disulfide (ReSe2) has attracted considerable attention because of its unusual properties and promising applications in electronic and optoelectronic devices.However,because of its low lattice symmetry and interlayer decoupling,anisotropic growth and out-of-plane growth occur easily,yielding thick flakes,dendritic structure,or flower-like structure.In this study,we demonstrated a bottom-up method for the controlled and scalable synthesis of ReSe2 by van der Waals epitaxy.To achieve controllable growth,a micro-reactor with a confined reaction space was constructed by stacking two mica substrates in the chemical vapor deposition system.Within the confined reaction space,the nucleation density and growth rate of ReSe2 were significantly reduced,favoring the large-area synthesis of ReSe2 with a uniform monolayer thickness.The morphological evolution of ReSe2 with growth temperature indicated that the anisotropic growth was suppressed at a low growth temperature (＜600 ℃).Field-effect transistors employing the grown ReSe2 exhibited p-type conduction with a current ON/OFF ratio up to 10s and a hole carrier mobility of 0.98 cm2/(V.s).Furthermore,the ReSe2 device exhibited an outstanding photoresponse to near-infrared light,with responsivity up to 8.4 and 5.1 A/W for 850-and 940-nm light,respectively.This work not only promotes the large-scale application of ReSe2 in high-performance electronic devices but also clarifies the growth mechanism of low-lattice symmetry 2D materials.     

Gold nanoparticle-based paper sensor for ultrasensitive and multiple detection of 32 (fluoro)quinolones by one monoclonal antibody

For rapid and simultaneous detection of (fluoro)quinolones, a broadly specific monoclonal antibody (mAb) that recognizes 32 (fluoro)quinolone antibiotics was prepared using a mixture of a norfloxacin derivative and a sarfloxacin derivative as the hapten. An immunochromatographic strip based on gold nanoparticles (AuNPs) was then assembled with goat anti-mouse antibody and antigen (sarfloxacin coupled to ovalbumin), used to form the C line and T line, respectively. This antigen competes with the (fluoro)quinolones in a sample incubated with mAbs labeled with AuNPs. The strip can detect 32 (fluoro)quinolones including oxolinic acid, nalidixic acid, miloxacin, pipemidic acid, piromidic acid, rosoxacin, cinoxacin, norfloxacin, pefloxacin, lomfloxacin, enofloxacin, fleroxacin, ciprofloxacin, enrofloxacin, dafloxacin, orbifloxacin, sparfloxacin, gemifloxacin, besifloxacin, balofloxacin, gatifloxacin, moxifloxacin, nadifloxacin, ofloxacin, marbofloxacin, flumequine, pazufloxacin, prulifloxacin, sarafloxacin, difloxacin, trovafloxacin, and tosufloxacin in milk within 10 min with the naked eye. The cut-off values of the strip range from 1 to 100 ng/mL and the limits of detection are 0.1–10 ng/mL. The strip does not cross-react with antibiotics including tetracycline, sulfamethazine, ampicillin, erythromycin, aflatoxin B1, or gentamicin. In short, this immunochromatographic strip is a very useful tool for the primary screening of (fluoro)quinolones in milk.

Open image in new window

     

Design of active and stable oxygen reduction reaction catalysts by embedding Co<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> nanoparticles into nitrogen-doped carbon

The oxygen reduction reaction (ORR) is essential in research pertaining to life science and energy. In applications, platinum-based catalysts give ideal reactivity, but, in practice, are often subject to high costs and poor stability. Some cost-efficient transition metal oxides have exhibited excellent ORR reactivity, but the stability and durability of such alternative catalyst materials pose serious challenges. Here, we present a facile method to fabricate uniform Co _x O _y nanoparticles and embed them into N-doped carbon, which results in a composite of extraordinary stability and durability, while maintaining its high reactivity. The half-wave potential shows a negative shift of only 21 mV after 10,000 cycles, only one third of that observed for Pt/C (63 mV). Furthermore, after 100,000 s testing at a constant potential, the current decreases by only 17%, significantly less than for Pt/C (35%). The exceptional stability and durability results from the system architecture, which comprises a thin carbon shell that prevents agglomeration of the Co _x O _y nanoparticles and their detaching from the substrate.

Open image in new window

     

Atomic origin of the traps in memristive interface

In recent years,trap-related interfacial transport phenomena have received great attention owing to their potential applications in resistive switching devices and photo detectors.Not long ago,one new type of memristive interface that is composed of F-doped SnO2 and Bi2S3 nano-network layers has demonstrated a bivariate-continuous-tunable resistance with a swift response comparable to the one in neuron synapses and with a brain-like memorizing capability.However,the resistive mechanism is still not clearly understood because of lack of evidence,and the limited improvement in the development of the interfacial device.By combining I-V characterization,electron energy-loss spectroscopy,and firstprinciple calculation,we studied in detail the macro/micro features of the memristive interface using experimental and theoretical methods,and confirmed that its atomic origin is attributed to the traps induced by O-doping.This implies that impurity-doping might be an effective strategy for improving switching features and building new interfacial memristors.     

Surface activation of colloidal indium phosphide nanocrystals

Against general wisdom in crystallization,the nucleation of InP and Ⅲ-Ⅴ quantum dots (QDs) often dominates their growth.Systematic studies on InP QDs identified the key reason for this:the dense and tight alkanoate-ligand shell around each nanocrystal.Different strategies were explored to enable necessary ligand dynamics—i.e.,ligands rapidly switching between being bonded to and detached from a nanocrystal upon thermal agitation—on nanocrystals to simultaneously retain colloidal stability and allow appreciable growth.Among all the surface-activation reagents tested,2,4-diketones (such as acetylacetone) allowed the full growth of InP QDs with indium alkanoates and trimethylsilylphosphine as precursors.While small fatty acids (such as acetic acid) were partially active,common neutral ligands (such as fatty amines,organophosphines,and phosphine oxides) showed limited activation effects.The existing amine-based synthesis of InP QDs was activated by acetic acid formed in situ.Surface activation with common precursors enabled the growth of InP QDs with a distinguishable absorption peak between ～450 and 650 nm at mild temperatures (140-180 ℃).Furthermore,surface activation was generally applicable for InAs and Ⅲ-Ⅴ based core/shell QDs.     

Inducing imperfections in germanium nanowires

Nanowires with inhomogeneous heterostructures such as polytypes and periodic twin boundaries are interesting due to their potential use as components for optical,electrical,and thermophysical applications.Additionally,the incorporation of metal impurities in semiconductor nanowires could substantially alter their electronic and optical properties.In this highlight article,we review our recent progress and understanding in the deliberate induction of imperfections,in terms of both twin boundaries and additional impurities in germanium nanowires for new/enhanced functionalities.The role of catalysts and catalyst-nanowire interfaces for the growth of engineered nanowires via a three-phase paradigm is explored.Three-phase bottom-up growth is a feasible way to incorporate and engineer imperfections such as crystal defects and impurities in semiconductor nanowires via catalyst and/or interfacial manipulation."Epitaxial defect transfer"process and catalyst-nanowire interfacial engineering are employed to induce twin defects parallel and perpendicular to the nanowire growth axis.By inducing and manipulating twin boundaries in the metal catalysts,twin formation and density are controlled in Ge nanowires.The formation of Ge polytypes is also observed in nanowires for the growth of highly dense lateral twin boundaries.Additionally,metal impurity in the form of Sn is injected and engineered via third-party metal catalysts resulting in above-equilibrium incorporation of Sn adatoms in Ge nanowires.Sn impurities are precipitated into Ge bi-layers during Ge nanowire growth,where the impurity Sn atoms become trapped with the deposition of successive layers,thus giving an extraordinary Sn content (＞6 at.％) in Ge nanowires.A larger amount of Sn impingement (＞9 at.％) is further encouraged by utilizing the eutectic solubility of Sn in Ge along with impurity trapping.