Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

Nanoscale Ferroelectricity in Crystalline γ‐Glycine

Ferroelectrics are multifunctional materials that reversibly change their polarization under an electric field. Recently, the search for new ferroelectrics has focused on organic and bio‐organic materials, where polarization switching is used to record/retrieve information in the form of ferroelectric domains. This progress has opened a new avenue for data storage, molecular recognition, and new self‐assembly routes. Crystalline glycine is the simplest amino acid and is widely used by living organisms to build proteins. Here, it is reported for the first time that γ‐glycine, which has been known to be piezoelectric since 1954, is also a ferroelectric, as evidenced by local electromechanical measurements and by the existence of as‐grown and switchable ferroelectric domains in microcrystals grown from the solution. The experimental results are rationalized by molecular simulations that establish that the polarization vector in γ‐glycine can be switched on the nanoscale level, opening a pathway to novel classes of bioelectronic logic and memory devices.     

Full CMOS continuous time filters for GSM applications

This paper describes full cmoscontinuous time filter design techniques which can meet the specifications commonly set for gsmapplications. First several cmosfilter design techniques are overviewed. The ota-ctechnique is discussed to some more detail. To overcome the main drawback of the lower total harmonic distortion in ota-ctechniques very linear operational transconductance amplifiers (ota)are required. Such an ota,together with the applied linearisation techniques is discussed. To fulfil high accuracy in cut- off frequencies of the filter an active tuning system is necessary. A new on- chip tuning system is presented. The paper concludes with a practical design example for the gsmsystem. Therein the different ota-ctechniques discussed are illustrated.     

A Complete Separation of Hexane Isomers by a Functionalized Flexible Metal Organic Framework

The separation ability of branched alkane isomers (nHEX, 3MP, 22DMB) of the flexible and functionalized microporous iron(III) dicarboxylate MIL‐53(Fe)‐(CF₃)₂ solid is evaluated through a combination of breakthrough experiments (binary or ternary mixtures), adsorption isotherms, X‐ray diffraction temperature analysis, quasi‐elastic neutron scattering measurements and molecular dynamics simulations. A kinetically controlled molecular sieve separation between the di‐branched isomer of hexane 22DMB from a mixture of paraffins is achieved. The reported total separation between mono‐ and di‐branched alkanes which was neither predicted nor observed so far in any class of porous solids is spectacular and paves the way towards a potential unprecedented upgrading of the RON of gasoline.     

Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

Study of the glucide fraction in ropy wines

Gas chromatography was used to study the polysaccharides present in samples that exhibited significant microbially induced viscosity values. Alterations in the media considered were related to the percentage glucose content and the total polysaccharide content.     

High‐Efficiency InP‐Based Photocathode for Hydrogen Production by Interface Energetics Design and Photon Management

The solar energy conversion efficiency of photoelectrochemical (PEC) devices is usually limited by poor interface energetics, limiting the onset potential, and light reflection losses. Here, a three‐pronged approach to obtain excellent performance of an InP‐based photoelectrode for water reduction is presented. First, a buried p–n⁺ junction is fabricated, which shifts the valence band edge favorably with respect to the hydrogen redox potential. Photoelectron spectroscopy substantiates that the shift of the surface photovoltage is mainly determined by the buried junction. Second, a periodic array of InP nanopillars is created at the surface of the photoelectrode to substantially reduce the optical reflection losses. This device displays an unprecedented photocathodic power‐saved efficiency of 15.8% for single junction water reduction. Third, a thin TiO₂ protection layer significantly increases the stability of the InP‐based photoelectrode. Careful design of the interface energetics based on surface photovoltage spectroscopy allows obtaining a PEC cell with stable record performance in water reduction.     

Bioinspired Magnetite Crystallization Directed by Random Copolypeptides

Control over magnetite (Fe₃O₄) formation is difficult to achieve in synthetic systems without using non‐aqueous media and high temperatures. In contrast, Nature employs often intrinsically disordered proteins to tightly tailor the size, shape, purity, and organization of the nanocrystals to optimize their magnetic properties. Inspired by such “flexible polyelectrolytes,” here random copolypeptides having different amino acid compositions are used as control agents in the bioinspired coprecipitation of magnetite through a ferrihydrite precursor, following a recently developed mineralization protocol. Importantly, the copolypeptide library is designed such that the amino acid composition can be optimized to simultaneously direct the size of the nanoparticles as well as their dispersibility in aqueous media in a one‐pot manner. Acidic amino acids are demonstrated to regulate the crystal size by delaying nucleation and reducing growth. Their relative content thus can be balanced to tune between the superparamagnetic and ferrimagnetic regimes, and high contents of negatively charged amino acids result in colloidal stabilization of superparamagnetic nanoparticles at high pH. Conversely, with positively charged lysine‐rich copolypeptides ferrimagnetic crystals are obtained which are stabilized at neutral pH and self‐organize in chains, as visualized by cryo‐transmission electron microscopy. Altogether, the presented findings give important insights for the future development of additive‐mediated nanomaterial syntheses.