Characterization of Precursor-Derived Silicon-Carbon-Nitrogen Ceramics after Creep Testing

Precursor-derived Si-C-N ceramics after creep testing in air were characterized using X-ray diffractometry (XRD) and transmission electron microscopy (TEM). XRD analysis showed that the crept Si-C-N ceramics were covered by an α-cristobalite layer. TEM observations revealed that the precipitated nanocrystallites in the crept Si-C-N ceramics were β-SiC. Between α-cristobalite and crept Si-C-N ceramic, there was an intermediate zone in which Si₂N₂O nanocrystallites were distributed homogeneously. Moreover, Si₂N₂O nanocrystallites were often found covering the surface of nanosized gas channels in the crept Si-C-N ceramics, where no α-cristobalite phase was detected. Based on these observations, a two-step oxidation mechanism of Si-C-N ceramics during creep testing in air was proposed.     

Physical crosslinking effects in α,ω-dihydroxy terminated polybutadienes

Structure and molecular dynamics of α,ω-dihydroxy terminated polybutadienes of varying number averaged molecular weight (1320-10?500 g/mol) have been investigated by Fourier-transformed infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, dielectric relaxation spectroscopy (DRS), differential scanning calorimetry (DSC) and wide-angle X-ray scattering (WAXS). DSC and DRS revealed an increase in the glass transition temperature upon decrease of the molecular weight, accompanied by an increasing dynamic fragility m (or steepness index) of the dielectric α-process. This correlation between T_g and m for different molecular weights indicates the presence of a physical network, where H-bonded end-group clusters act as temporary crosslinks. From the dielectric relaxation strength Δ?_α(M_n), the fraction of associated hydroxy groups (f_bond) was estimated showing a peak value for the two but shortest polymers, a behaviour that strongly resembles the molecular weight dependence of the fragility. By considering the quantity f_bond(M_n) in a modified Fox-Flory approach, the measured T_g(M_n) behaviour could be reproduced in a satisfying way. FTIR results support this general picture and show a considerable dependence of the extent of hydrogen bonding and formation of hydroxy groups associates on the molecular weight. Further, WAXS and DSC results disprove the idea of formation of pseudo-crystalline hydrophobic microdomains in these compounds as suggested by other authors.     

An axisymmetric model for thread forming in polycarbonate and polypropylene screw and boss fasteners

Plastic boss and screw fasteners are an economical means of securing automotive components, such as instrument or body panels. However, new materials and/or suboptimal design present challenges to the boss/screw effectiveness. Failure of a boss/screw can result is loss of functional performance or increased squeak and rattle. Failure is often controlled by what occurs during the initial thread‐forming process. Thus, the goal of this paper is to develop an FEA model to elucidate the thread‐forming process so that we can facilitate subsequent design and/or process optimization, and understand potential failure modes. The FEA must accommodate nonlinear couplings, such as large strain and heat transfer. Heat generation is present in the forms of interfacial shear heating and plastic work associated with the large deformation of the interface between the boss and screw. Strain rate‐dependent materials are included using the Eyring theory for plastic flow of polymeric materials. Results of the model are presented and compared to experimentally determined torque curves and temperatures. Polym. Eng. Sci. 44:1498–1508, 2004. © 2004 Society of Plastics Engineers.     

Is the particle deposition in a cell exposure facility comparable to the lungs? A computer model approach

Abstract

Cell exposure experiments at the air-liquid interface (ALI) are used increasingly as indicators for health effects and for the impact of aerosols on the lung. Thereby the aerosol particles are kept airborne and can deposit on a cell surface area similar to the human respiratory tract (RT). However, geometry and air flow rates of an ALI system deviate considerably from the RT. As the tissue-delivered particle dose to the lungs (TD) can hardly be measured, computer models of particle deposition are used here to mimic both the particle deposition at ALI and in the RT. An ALI exposure setup (VitroCell GmbH) for an airflow rate of 100 cm³ min^?1 is selected, where the particle deposition model has been verified experimentally. For the RT we use the hygroscopic lung deposition model of Ferron et al. (2013 Ferron, G. A., S. Upadhyay, R. Zimmermann, and E. Karg. 2013. Model of the deposition of aerosol particles in the respiratory tract of the rat. II. Hygroscopic particle deposition. J. Aerosol Med. Pulm. Drug Deliv. 26 (2):101–19. doi:10.1089/jamp.2011.0965.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]). Model runs are performed for the particle deposition and for the deposited particles per surface area in both the ALI and the RT. The results show that the ALI-deposited mass is 1-2 orders of magnitude higher than in the alveolar region, because the surface area of the lung region is substantially larger. A particle size range from 40 to 450 nm is identified, where the ratio of both the deposition in a lung region and the deposition at the ALI varies by a factor less than two. Mean values for this ratio are 31 and 101 for the tracheo-bronchial and the alveolar region, respectively. The same size range is found for the ratio of the deposited particles per surface area in a lung region and at the ALI. For this range the mean surface deposition at the ALI is 23- and 1575-times larger than in the tracheo-bronchial and the alveolar lung region, respectively. The effect is partly compensated by different flow rate and cell size.

Copyright © 2020 American Association for Aerosol Research     

Elastic properties of adhesive polymers. II. Polymer films and bond lines by means of nanoindentation

Seven different polymers used frequently as adhesives and/or matrix polymers in wood, wood composites, and natural fiber‐reinforced composites were studied by uniaxial tensile tests and nanoindentation. It was shown that the elastic modulus, the hardness, the creep factor, and the elastic‐, plastic‐, and viscoelastic work of indentation of the seven different polymers is essentially the same regardless whether the polymers were tested in the form of pure films or in situ, i.e., in an adhesive bond line with spruce wood. An excellent correlation was found between the elastic modulus measured by tensile tests and the elastic modulus measured by nanoindentation. In spite of the good correlation, the elastic modulus measured by nanoindentation is significantly higher than the elastic modulus measured by tensile tests. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1234–1239, 2006     

Characterization of Pheromone Blend for Grapevine Moth, Lobesia botrana by Using Flight Track Recording

The behavioral responses of Lobesia botrana males to calling females, pheromone gland extracts, and synthetic sex pheromones were recorded in a wind tunnel. Gland extracts and synthetic pheromones were released from a pheromone evaporator. The numbers of males reaching the source and their flight tracks in response to calling females and pheromone gland extracts were compared to those of synthetic blends. Upwind flights to natural sex pheromone were straighter and faster than to a three-component blend of (E)-7,(Z)-9-dodecadienyl acetate (E7,Z9–12:Ac), (E)-7,(Z)-9-dodecadien-1-ol (E7,Z9–12:OH), and (Z)-9-docecenyl acetate (Z9–12:Ac) (100:20:5). The optimum ratio of E7,Z9–12:OH and Z9–12:Ac to E7,Z9–12:Ac was found to be 5% and 1%, respectively. An additional seven compounds identified in the sex pheromone gland were investigated for their biological activity. Two unsaturated acetates, i.e., (E)-9-dodecenyl acetate (E9–12:Ac) and 11-dodecenyl acetate (11–12:Ac), increased the number of males reaching the source as well as straightness, linear velocity, and decreased the track angle of upwind flight. Optimum response was obtained by releasing 10 pg/min E7,Z9–12:Ac in a mixture with 0.5 pg/min E7,Z9–12:OH, 0.1 pg/min Z9–12:Ac, 0.1 pg/min E9– 12:Ac and 1 pg/min 11-12–Ac. The saturated acetates previously identified in the female glands were biologically inactive.     

Fluorescence of poly(di-n-alkylsilane)s in room-temperature solution

A comprehensive study of the electronic absorption and emission spectra and the fluorescence quantum yield and lifetime of seven poly(di-n-alkylsilane)s and of three isotopically labelled poly(di-n-hexylsilane)s in hydrocarbon solution at room temperature is reported. Also reported are fluorescence polarization and carbon tetrachloride quenching of fluorescence of poly(di-n-hexylsilane). The observed fluorescence spectra, quantum yield, and polarization depend on the selected excitation energy in a very characteristic fashion, whereas the fluorescence lifetime does not; however, it depends on the selected emission energy. These characteristic dependencies are qualitatively accounted for by the previously proposed segment distribution model if one assumes that the photophysical behavior at higher excitation energies is strongly affected by the presence of a low-lying weakly allowed state in short-segment chromophores and the behavior at lower excitation energies is dictated by the selective excitation of emitting long-segment chromophores.     

Verification of randomized consensus algorithms under round-rigid adversaries

International Journal on Software Tools for Technology Transfer - Randomized fault-tolerant distributed algorithms pose a number of challenges for automated verification: (i) parameterization in...