Preparation and morphology of electrically conductive and transparent poly(vinylchloride)-polypyrrole composite films

Summary The chemical process of preparing poly(vinylchloride)-polypyrrole composite films with high electrical conductivity and transparency has been studied. Pyrrole has been diffused into the poly(vinylchloride) matrix in the swelling medium of n-hexane and acetone mixture. The oxidative polymerization of the diffused pyrrole in the binary solvent system of acetonitrile and methanol gives high conductivity of the polypyrrole as well as the good penetration of the oxidant into the PVC polymer matrix. The analytical testing of the composite film shows the formation of homogeneous mixture of polypyrrole and poly(vinylchloride) conductive layer within the 1.0m of thickness on the film surface. The transparency of the composite film showed about 50–60% at 500 nm. The electrical conductivity of the composite was about 20 s/cm.     

浅析汉臣在忽必烈即位过程中的作用

蒙元王朝是一个少数民族政权,在对汉人的任用问题上十分敏感,大部分蒙古最高统治者对汉臣的防范多于信任,甚至干脆不用汉臣,而元世祖忽必烈在元朝的统治者中算是比较开明的,特别是他即位之前及中统时期,大量任用汉臣,这些汉臣也给予了忽必烈充分的回报,他们在忽必烈还是亲王时,充当王府幕僚,为忽必烈出谋划策,积蓄力量,后来又为其夺取汗位立下了汗马功劳.     

循环经济在赣州矿产资源开发与管理中的研究

如何利用赣州矿产资源优势发展本地经济,节约资源开采,充分利用现有资源,实现资源的循环利用,保持生态环境的良好发展具有重要意义。本文分析介绍了循环经济、赣州矿产资源及开发利用现状,并提出了实现矿业循环经济的具体措施。     

乳胶制品生产的工序能力分析及质量控制

本文分析了乳胶制品的生产过程，并对工序能力指数进行了分析，从而推断出产品的质量。     

Dynamic data packing towards the optimization of QoC and QoS in networked control systems

A class of networked control systems is investigated whose communication network is shared with other applications. The design objective for such a system setting is not only the optimization of the control performance but also the efficient utilization of the communication resources. We observe that at a large time scale the data packet delay in the communication network is roughly varying piecewise constant, which is typically true for data networks like the Internet. Based on this observation, a dynamic data packing scheme is proposed within the recently developed packet-based control framework for networked control systems. As expected this proposed approach achieves a fine balance between the control performance and the communication utilization: the similar control performance can be obtained at dramatically reduced cost of the communication resources. Simulations illustrate the effectiveness of the proposed approach.     

In situ study of the mechanical properties of airborne haze particles

Particulate pollution has raised serious concerns regarding its potential impacts on human health in developing countries. However, much less attention has been paid to the threat of haze particles to machinery and industry. By employing a state-of-the-art in situ scanning electron microscope compression testing technique, we demonstrate that iron-rich and fly ash haze particles, which account for nearly 70% of the total micron-sized spherical haze particles, are strong enough to generate abrasive damage to most engineering alloys, and therefore can generate significant scratch damage to moving contacting surfaces in high precision machineries. Our finding calls for preventive measures to protect against haze related threat.     

德惠断陷下白垩统碎屑岩储层特征及控制因素分析

德惠断陷下白垩统登娄库组、营城组、沙河子组储层物性差,勘探风险大.利用岩心观察、铸体薄片鉴定、扫描电镜分析、黏土X线衍射分析等方法,分析储层基本特征、储层成岩作用和控制因素.结果表明:德惠断陷下白垩统碎屑岩储层成分成熟度和结构成熟度较低,储层孔隙类型主要有残余原生孔、次生孔和混合孔,储层物性和孔隙结构较差;压实作用是导致储层物性变差的主要原因,溶蚀作用改善储层物性;纵向上发育2个次生孔隙带,主要形成于中成岩期,次生孔隙带的形成与有机质生烃排酸和断裂有关.研究结果为德惠断陷下白垩统进一步油田勘探提供地质依据,对其他地区类似储层研究有一定借鉴意义.     

响应曲面法优化河蚬发酵去腥工艺

采用生物发酵法对河蚬进行去腥处理,通过单因素试验研究酵母用量、发酵温度和发酵时间对去腥效果的影响,再运用响应曲面试验设计进行优化试验,确定最佳发酵去腥工艺条件。其最佳工艺条件为：以lOOg河蚬计,酵母2g、发酵温度36℃、发酵时间2h。     

高温预析出对Al-Zn-Mg-Cu铝合金显微组织、强度和应力腐蚀抗力的影响

通过改变固溶条件 ,对Al Zn Mg Cu高强铝合金采用先高温后低温的两步固溶处理 (高温预析出 )来改善晶内和晶界的析出状态 ,研究了高温预析出对Al Zn Mg Cu铝合金的金相组织、强度和应力腐蚀性能的影响。结果表明 ,4 6 5℃高温预析出在保持较高强度和塑性的同时 ,可以改善合金的抗应力腐蚀性能     

Investigation into the thermo-viscoplastic finite element analysis of square die extrusion of square section with Lagrangian description

An analysis of three-dimensional hot extrusion through landless square dies is carried out as a nonsteady-state problem. In the problem, difficulties arise from the severe distortion and die interference of elements at the aperture rim of the die, even with a small punch travel. Finite element simulation is impossible without intermittent remeshing procedures. To overcome these difficulties, an automatic remeshing technique is proposed by employing a modular conceptual mesh structure. In the analysis of temperature distribution, conduction, convection and radiation are considered in connection with a deformation analysis of a visco-plastic material. The effect of the mesh structure on the present scheme as well as material properties and temperatures associated with punch travel is discussed. As an example, an extrusion of a square section is simulated. In order to confirm the present scheme, experiments are carved out using aluminium at the elevated temperature.