Cell design in bacteria as a convex optimization problem

In this paper, we investigate the prediction of the cell composition of bacteria with respect to their medium. By modeling the bacterium as an interconnection of subsystems, the problem is written as a non-smooth convex optimization problem equivalent to a Linear Programming feasibility problem. We then obtain a new method, called Resource Balance Analysis (RBA), predicting the distribution of the available resources in the medium among the various cellular subsystems. Beyond its predictive capability, the proposed approach grasps some fundamental aspects of the bacterium physiology by including a refined model. This method reveals the existence of an intrinsic bottleneck in the system resource distribution of the bacterium, leading to the existence of a structural limitation of its growth rate which can be predicted. RBA is also able to predict the configuration of the metabolic network for a given medium at steady-state regimen which nicely fits the available experimental results for the gram-positive model bacterium Bacillus subtilis.     

Finite element model updating and structural damage identification using OMAX data

The main limitations in the finite element (FE) model updating technique lie in the ability of the FE model to represent the true behavior of the structure (modelling problem), and in the ability to identify enough modal parameters with sufficient accuracy, especially for large structures that are tested in operational conditions (identification problem). In this paper, the identification problem is solved with an OMAX approach, where an artificial force is used in operational conditions and a structural model is identified that takes both the forced and the ambient excitation into account. From an extensive case study on a real three-span bridge, it is observed that, while updating the FE model using the experimental output-only data yields a good fit, discrepancies show up when the more extensive set of OMAX data is used for validation, or even for updating. It can be concluded that an OMAX approach not only increases the well-posedness of the updating problem, it also allows to detect potential inaccuracies in the FE model.     

The effect of ozonization on furniture dust: Microbial content and immunotoxicity in vitro

Moisture and mold problems in buildings contaminate also the furniture and other movable property. If cleaning of the contaminated furniture is neglected, it may continue to cause problems to the occupants even after the moisture-damage repairs. The aim of this study was to determine the effectiveness of high-efficiency ozone treatment in cleaning of the furniture from moisture-damaged buildings. In addition, the effectiveness of two cleaning methods was compared. Samples were vacuumed from the padded areas before and after the treatment. The microbial flora and concentrations in the dust sample were determined by quantitative cultivation and QPCR-methods. The immunotoxic potential of the dust samples was analyzed by measuring effects on cell viability and production of inflammatory mediators in vitro. Concentrations of viable microbes decreased significantly in most of the samples after cleaning. Cleaning with combined steam wash and ozonisation was more effective method than ozonising alone, but the difference was not statistically significant. Detection of fungal species with PCR showed a slight but nonsignificant decrease in concentrations after the cleaning. The immunotoxic potential of the collected dust decreased significantly in most of the samples. However, in a small subgroup of samples, increased concentrations of microbes and immunotoxicological activity were detected. This study shows that a transportable cleaning unit with high-efficiency ozonising is in most cases effective in decreasing the concentrations of viable microbes and immunotoxicological activity of the furniture dust. However, the method does not destroy or remove all fungal material present in the dust, as detected with QPCR analysis, and in some cases the cleaning procedure may increase the microbial concentrations and immunotoxicity of the dust.     

Determination of carotenoids in salmonoids

Summary A routine method for quantitative analysis of carotenoid pigments in salmonoids has been developed, based on an extraction with acetone and subsequent cleaning on silicagel prior to identification by thin-layer chromatography (TLC). Quantitative determinations of astaxanthin and canthaxanthin were performed by high-pressure liquid chromatography (HPLC) on a C-18 column eluted with 20% ethyl acetate and 80% methanol/water (9+1) followed by spectrophotometric detection in the visible region. Other combinations of carotenoids could be separated by this system using isocratic or gradient elution. Carotenoid contents of examined fish meat were 2.3–8.1 mg astaxanthin/kg and 0.3–1.0 mg canthaxanthin/kg. Purified colour extracts from fish could be stored at –18 °C for a least 1 month before a final carotenoid analysis was carried out.

---

Bestimmung von Carotenoiden in Salmoniden

Zusammenfassung Es wurde eine Routinemethode für die quantitative Analyse von Carotenoidpigmenten in Salmoniden entwickelt, die auf einer Extraktion der Farbstoffe mit Aceton und einem Reinigungsschritt auf Kieselgel vor der Identifizierung durch TLC beruht. Eine quantitative Bestimmung von Astaxanthin und Canthaxanthin konnte durch HPLC auf einer C-18 Säule und Elution mit Essigester/Methanol Wasser (9 + 1) (20:80) gefolgt von photometrischer Detektion im sichtbaren Bereich erzielt werden. Auch andere Kombinationen von Carotenoiden können mit diesem System getrennt werden, wenn isokratische oder Gradientenelution verwendet wird. Die Gehalte an Carotenoiden betrugen in den untersuchten Fischen 2,3–8,1 mg Astaxanthin/Kg und 0,3–1,0 mg Canthaxanthin/kg. Die gereinigten Farbstoffextrakte sind bei –18 °C mindestens 1 Monat lang lagerstabil.

     

Real Voices in the Technological Wilderness Using ethnographic methods to challenge global wireless paradigms

This paper explores the use of ethnographic research to help companies design, build, and implement products and services that meet the stated and unstated needs of consumers. Although many products enjoy an international presence in the global economy, the market is far from homogeneous. Cultural practices and beliefs strongly influence the meaning and, consequently, the usage of products. If a product is not culturally resonant, the product may not be adopted by consumers - no matter how technologically advanced or innovative the product may be. Specifically, this paper explores mobile phone, and advanced network I-mode adoption in Japan. Research methodologies used in the case study are described, including how these techniques elucidate the various social and cultural processes that influence adoption. In order to develop wireless and other mobile communication solutions that are culturally, emotionally, and technically satisfying for users, the current “ global paradigm” must be reconsidered. Incorporating anthropology into the design process is a crucial first step in helping telecommunication companies define their next generation of products and services in the mobile communications arena.     

Electrically Addressable Hybrid Architectures of Zinc Oxide Nanowires Grown on Aligned Carbon Nanotubes

The fabrication and characterization of hybrid architectures of ZnO nanowires (ZNWs) grown on organized carbon nanotubes (CNTs), by a two‐step chemical vapor deposition (CVD) process involving CNT growth from a hydrocarbon source followed by ZNW growth using a Zn metal source, is reported. The ZNWs grow uniformly and radially from individual CNTs and CNT bundles, and the aligned morphology of the CNTs is not disturbed by the ZNW growth process. The nucleation and growth of ZnO crystals on CNTs are analyzed in relation to the classical vapor–solid mechanism. Importantly, the CNTs make uniform and distributed electrical contact to the ZNWs, with up to a 1000‐fold yield advantage over conventional ZNW growth on a flat substrate. Hybrid ZNW/CNT sheets are fabricated by scalable CVD, rolling, and printing methods; and their electrical properties, which are governed by transport through the anisotropic CNT network, are characterized. Functional interaction between the ZNWs and CNTs is demonstrated by photoconductive behavior and photocurrent generation of the hybrid material under UV illumination. There is significant future opportunity to extend these processing methods to fabricate other functional oxides on CNTs, and to build devices that harness the attractive properties of ZNWs and CNTs with high volumetric efficiency over large areas.     

PSOBLAP: Particle Swarm Optimization-Based Bandwidth and Link Availability Prediction Algorithm for Multipath Routing in Mobile Ad Hoc Networks

Wireless Personal Communications - In mobile ad hoc network (MANET), optimal path identification is the main problem for implementing the Multipath routing technique. MANET desires an efficient...     

Scheduling schemes for multimedia service in wireless OFDM systems

Scheduling schemes play a key role in the system performance of broadband wireless systems such as WLANs/WMANs. Maximal SNR and round robin are two conventional scheduling strategies that emphasize efficiency and fairness, respectively. The proportional fair scheme provides a trade-off between efficiency and fairness, and has been well studied in TDMA and CDMA systems. In this article we extended the PF scheduling scheme to OFDM-based BWSs (OPF). In addition, we propose three variations: adaptive OPF (AOPF), multimedia AOPF (MAOPF), and normalized MAOPF (NMAOPF) in order to meet the QoS requirements for multirate services in multimedia systems. The adaptive modulation and coding schemes in time varying and frequency selective fading are considered. The system performances of the algorithms are compared in terms of efficiency (throughput and mean packet delay) and fairness (user satisfaction rate and average user rate). Joint physical and media access control layer simulation results show that AOPF and MAOPF can improve throughput at the cost of fairness, and NMAOPF can provide the highest throughput without losing fairness.     

High pass filter with above IC integrated SrTiO3 high K MIM capacitors

This paper describes realization and characterization of SrTiO₃ (STO) high K MIM capacitors above BiCMOS integrated circuit (IC). These capacitances are connected to IC and are used as coupling capacitors in order to realize a high pass filter. Surface capacitance achieved is 10 nF/mm² with capacitance value of 1.2 nF. The process for STO MIM fabrication does not exceed 400 °C, which is compatible with interconnections. Typical K and dielectric losses values obtained are, respectively 110% and 2%. Yield obtained reaches 83% for capacitors. A functional high pass filter using these STO capacitors was realized in this study. It exhibits a cut-off frequency at 6.5 kHz and a constant gain at higher frequencies of −1.3 dB.