This paper presents a reliability-based settlement analysis of T-shaped deep cement mixing (TDM) pile-supported embankments over soft soils. The uncertainties of the mechanical properties of the in-situ soil, pile, and embankment, and the effect of the pile shape are considered simultaneously. The analyses are performed using Monte Carlo Simulations in combination with an adaptive Kriging (using adaptive sampling algorithm). Individual and system failure probabilities, in terms of the differential and maximum settlements (serviceability limit state (SLS) requirements), are considered. The reliability results for the embankments supported by TDM piles, with various shapes, are compared and discussed together with the results for conventional deep cement mixing pile-supported embankments with equivalent pile volumes. The influences of the inherent variabilities in the material properties (mean and coefficient of variation values) on the reliability of the piled embankments, are also investigated. This study shows that large TDM piles, particularly those with a shape factor of greater than 3, can enhance the reliability of the embankment in terms of SLS requirements, and even avoid unacceptable reliability levels caused by variability in the material properties. 相似文献
The Shiga toxin (Stx) family is composed of related protein toxins produced by the bacteria Shigella dysenteriae and certain pathogenic strains of E. coli. No effective therapies for Stx intoxication have been developed yet. However, inhibitors that act on the intracellular trafficking of these toxins may provide new options for the development of therapeutic strategies. This study reports the synthesis, chromatographic separation, and pharmacological evaluation of the two enantiomers of Retro‐1, a compound active against Stx and other such protein toxins. Retro‐1 works by inhibiting retrograde transport of these toxins inside cells. In vitro experiments proved that the configuration of the stereocenter at position 5 is not crucial for the activity of this compound. X‐ray diffraction data revealed (S)‐Retro‐1 to be slightly more active than (R)‐Retro‐1. 相似文献
Carbamoyl fluorides are formed in reactions of hydroxylamines with difluorocarbene generated from sodium bromodifluoroacetate as readily available and non‐toxic carbene precursor. The process shows a high functional group tolerance, and the reaction path has been rationalized by computational calculations.
A series of LiNi1/3Mn1/3Co1/3O2 samples with α-NaFeO2 structure belonging to the D3d5 space group were synthesized using tartaric acid as a chelating agent by wet-chemical method. Different acid to metal-ion ratios R have been used to investigate the effect of this parameter on the physical and electrochemical properties. We have characterized the reaction mechanism, the structure, and morphology of the powders by TGA, XRD, SEM and TEM imaging, completed by magnetic measurements, Raman scattering spectroscopy, and complex impedance experiments. We find that the LiNi1/3Mn1/3Co1/3O2 sintered at 900 °C for 15 h with an acid to metal-ion ratio R = 2 was the optimum condition for this synthesis. For this optimized sample, only 1.3% of nickel-ions occupied the 3b Wyckoff site of the lithium-ions sublattice. The electrochemical performance has been investigated using a coin-type cell containing Li metal as the anode. The electronic performance is correlated to the concentration of the Ni(3b) defects that increase the charge transfer resistance and reduce the lithium diffusion coefficient. The optimized cell delivered an initial discharge capacity of 172 mAh g−1 in the cut-off voltage of 2.8-4.4 V, with a coulombic efficiency of 93.4%. 相似文献
Intramolecular C O bond forming reactions of aryl 2‐bromobenzyl ketones lead to benzo[b]furans. The cyclizations can be catalyzed by 10 mol% of iron trichloride (of 98% or of 99.995% purity) or sub‐mol% quantities of copper(II) chloride (of 99.995% purity). 相似文献
The synthesis of hydrophobic starch was performed via palladium-catalyzed telomerization of butadiene with native starch. This reaction is efficiently performed in water in the presence of neutral or cationic surfactant with high HLB. After optimization of the reaction conditions, TOF up to 446 was achieved. 相似文献
The targeting of bioactive molecules and probes to mitochondria can be achieved by coupling to the lipophilic triphenyl phosphonium (TPP) cation, which accumulates several hundred-fold within mitochondria in response to the mitochondrial membrane potential (Δψm). Typically, a simple alkane links the TPP to its “cargo”, increasing overall hydrophobicity. As it would be beneficial to enhance the water solubility of mitochondria-targeted compounds we explored the effects of replacing the alkyl linker with a polyethylene glycol (PEG). We found that the use of PEG led to compounds that were readily taken up by isolated mitochondria and by mitochondria inside cells. Within mitochondria the PEG linker greatly decreased adsorption of the TPP constructs to the matrix-facing face of the mitochondrial inner membrane. These findings will allow the distribution of mitochondria-targeted TPP compounds within mitochondria to be fine-tuned. 相似文献
This study proposes a method to adapt the geometry of the toolpath to a specified target. In the case study presented, the geometrical target is to remove a constant thickness on the rough workpiece. This case is normally present in the polishing of the femoral component of knee prostheses. In fact, an operator carries out these operations manually. The aim of this study is to contribute to the automation of prosthesis production, notably, in the preparation of surface polishing. The proposed method can deform and adapt a toolpath to ensure the required geometry of the machined surface. The proposed toolpath deformation method is composed of three steps: alignment, toolpath deformation, and toolpath smoothing. Alignment between the measured surface of the roughcast prostheses and the nominal toolpath is carried out by an Iterative Closest Point (ICP) algorithm. The principle of this algorithm is to find the optimal rigid transformation to readjust the toolpath on the measured surface. Subsequently, the toolpath is deformed to remove the constant thickness of the roughcast prostheses. Next, to increase the machined quality, a smoothing stage is carried out on the obtained toolpath. Experimental tests on industrial prostheses geometry are conducted to validate the effectiveness of this method. 相似文献