A practical controller for explicit rate congestion control

This paper examines congestion control for explicit rate data networks. The available bit rate (ABR) service category of asynchronous transfer mode (ATM) networks serves as an example system, however, the results of this paper are applicable to other explicit rate systems as well. After a plant model is established, an adaptive control strategy is presented. Several algorithm enhancements are then introduced. These enhancements reduce convergence time, improve queue depth management, and reduce parameter bias. This work differentiates itself from the other contributions in the area of rate-based congestion control in its balanced approach of retaining enough complexity as to afford attractive performance properties, but not so much complexity as to make implementation prohibitively expensive     

The effect of surface roughness on the radiative properties ofpatterned silicon wafers

The radiative properties of patterned silicon wafers have a major impact on the two critical issues in rapid thermal processing (RTP), namely wafer temperature uniformity and wafer temperature measurement. The surface topography variation of the die area caused by patterning and the roughness of the wafer backside can have a significant effect on the radiative properties, but these effects are not well characterized. We report measurements of room temperature reflectance of a memory die, logic die, and various multilayered wafer backsides. The surface roughness of the die areas and wafer backsides is characterized using atomic force microscopy (AFM). These data are subsequently used to assess the effectiveness of thin film optics in providing approximations for the radiative properties of patterned wafers for RTP applications     

Biotransformation and toxicity of the lipoxygenase inhibitor 2-hydroxy-5-methyllaurophenone oxime (FLM 5011) on Hep G2 cells

2-Hydroxy-5-methyllaurophenone oxime (FLM 5011) is an inhibitor of lipoxygenase with antiinflammatory and antiallergic actions. We incubated FLM 5011 on the human immortal cell line Hep G2 and found a similar metabolite spectrum as in rat urine and faeces. We also measured the cytotoxicity of FLM 5011 on Hep G2 monolayers by the amido black assay and found that the influence of cell proliferation is partly due to apoptotic activities. Although the metabolic activity of Hep G2 cells is lower compared to rat hepatocyte cultures they are a suitable test system for biotransformation studies. Their higher proliferation rate allows toxicity to be characterised more exactly.     

Instron texture profile of buffalo milk cheddar cheese as influenced by composition and ripening changes

Buffalo milk Cheddar cheese samples of different ages were analysed for compositional attributes (CA), ripening indices (RI) and Instron Textural Profile (ITP). All samples were compositionally alike, except for pH and salt-in-moisture (SM) contents. RI showed significant variations. CA and RI showed highly significant correlations within themselves and with each other, except for moisture with pH, SM with moisture, MNFS, Fat and FDM and Fat with MNFS. The ITPs of cheeses showed significant variations and had highly significant intercorrelations indicating their interdependence. CA (except moisture and MNFS) and RI showed a highly significant correlationship with ITPs. Moisture content showed a highly significant correlationship with all ITPs, except cohesiveness and springiness, where it was significant. MNFS content showed significant correlations only with hardness and brittleness. Stepwise regression analysis revealed that MI was the most predominant factor influencing cheese texture, followed by pH, SM, FDM and TVFA. Knowing Ca and RI, the textural properties of cheeses can be forecast through mathematical equations. Similarly the age of cheese can also be predicted if RI and/or textural properties are known.     

Aromatic nitrations by mixed acid. Slow liquid-liquid reaction regime

Aromatic nitrations by mixed acid have been selected as a specific case of a heterogeneous liquid-liquid reaction. An extensive experimental programme has been followed using adiabatic and heat-flow calorimetry and pilot reactor experiments, supported by chemical analysis. A series of nitration experiments has been carried out to study the influences of different initial and operating conditions such as temperature, stirring speed and sulphuric acid concentration. In parallel, a mathematical model to predict the overall conversion rate has been developed. In this paper the mathematical modelling and the implementation and experimental validation for benzene, toluene and chlorobenzene mononitration in the kinetic control regime (slow liquid-liquid reaction) are presented and discussed.     

Structured genetic algorithm for robust H∞ controlsystems design

A structured genetic algorithm (SGA) approach is developed for robust controller design based on the concept of an H^∞ loop-shaping technique and the method of inequalities. Such an SGA is capable of simultaneously searching the orders and coefficients of the precompensator and postcompensator for the weighted plant. It is, therefore, not necessary to predefine the order of compensators as in usual practice. A multiple objective ranking approach is also incorporated so that the design criteria of extreme plants can be easily achieved. The effectiveness of such a technique is illustrated by a high-purity distillation column design example     

High speed p-type SiGe modulation-doped field-effect transistors

We report on the fabrication and characterization of high-speed p-type modulation-doped field-effect transistors (MODFETs) with 0.7-μm and 1-μm gate-lengths having unity current-gain cut-off frequencies (f_T) of 9.5 GHz and 5.3 GHz, respectively. The devices were fabricated on a high hole mobility SiGe heterostructure grown by ultra-high-vacuum chemical vapor deposition (UHV-CVD). The dc maximum extrinsic transconductance (g_m) is 105 mS/mm (205 mS/mm) at room temperature (77 K) for the 0.7-μm gate length devices. The fabricated devices show good pinch-off characteristics and have a very low gate leakage current of a few μA/mm at room temperature and a few nA/mm at 77 K     

Genetic algorithms: concepts and applications [in engineeringdesign]

This paper introduces genetic algorithms (GA) as a complete entity, in which knowledge of this emerging technology can be integrated together to form the framework of a design tool for industrial engineers. An attempt has also been made to explain “why” and “when” GA should be used as an optimization tool     

Reliability and performance analysis of time – space – time switching networks with multiple separated space switches

Since electronic switching systems usually require very strict reliability requirements as well as good performance objectives, we need to jointly analyse the performance and reliability of switching systems. In this paper, we compare conventional time–space–time switches with single space switches with those with multiple separated space switches, from the viewpoints of reliability and performance. We consider time–space–time switching networks which consist of N incoming time switches, i.e. one NxN space switch, two (N/2)x(N/2) space switches, and four (N/4)x(N/4) space switches. We introduce a Markov reliability model to study the effect of failures and analyse the reliability and performance of three different types of switching networks in terms of average blocking probability and the mean time to unreliable operation, as we vary the offered traffic. As a result, T–S–T switching networks with multiple separated space switches exhibit better performance and reliability than those with single space switches.