原料中杂质对丙烯与苯烷基化催化剂性能的影响

分析了原料中杂质对催化剂活性和稳定性的影响及脱除杂质的方法。不同来源的丙烯所含杂质不同 ,炼厂丙烯杂质主要是氮化物和双烯 ,而裂解丙烯杂质主要是双烯 ;苯的主要杂质是饱和烷烃和微量水 ,这些杂质对催化剂活性和稳定性都有影响。实验结果表明 ,杂质含量越高 ,催化剂的活性和稳定性越低 ,而采用强酸性阳离子交换树脂可以脱除丙烯中的杂质。     

中微孔复合分子筛的合成研究开发进展

综述了复全分子筛合成的研究进展，介绍了原位合成法，离子交换法和纳米组装法。分析比较了各种合成方法的特点，讨论了方法的适用范围，指出复合分子筛的合成中存在的一些问题，认为合成具有大－中－小孔梯度分布的复合物和用硅铝纳米簇进行自组装合成中孔材料将是今后发展的主流。     

Effect of Addition of Oxides on Low-Temperature Oxidation of Molybdenum Disilicide

A type of aluminosilicate that has a good wetting property for molybdenum disilicide (MoSi₂) was added to a MoSi₂ matrix to study the effects on the microstructure and low-temperature oxidation. It was found that the composites had not only good low-temperature oxidation resistance but also high thermal shock resistance when the added oxides formed a network microstructure in the matrix. There was no appreciable oxidation gain for MoSi₂/oxide composites with a network microstructure at 773 K for 2500 h. The results indicate that microstructure design is a simple and effective solution to preventing the low-temperature oxidation of MoSi₂.     

Preparation and thermal property of hybrid nanocomposites by free radical copolymerization of styrene with octavinyl polyhedral oligomeric silsesquioxane

The poly(styrene‐co‐octavinyl‐polyhedral oligomeric silsesquioxane) (PS–POSS) organic–inorganic hybrid nanocomposites containing various percent of POSS were prepared via one‐step free radical polymerization and characterized by FTIR, high‐resolution ¹H NMR, ²⁹Si NMR, GPC, DSC, and TGA technologies. The POSS contents in these nanocomposites were determined using FTIR calibration curve. The result shows that the POSS contents in nanocomposites can be tailored by varying the POSS feed ratios. On the basis of the POSS contents in the nanocomposites and the ¹H NMR spectra, the number of reacted vinyl groups of each octavinyl‐POSS macromonomer were calculated to be 6–8. DSC and TGA measurements indicate that the incorporation of POSS into PS homopolymer can apparently improve the thermal properties of the polymeric materials. The dramatic T_g and T_dec increases are mainly due to the formation of star and low cross‐linking structure of the nanocomposites, where POSS cores behave as the joint points and hinder the motion and degradation of the polymeric chains. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

高效乙烯聚合催化剂的制备——I．催化剂的制备规律

研究了新型含镁络合物的结构、性质及其用于制备高效乙烯聚合催化剂的制备规律。结果表明：将镁、有机醇以及不与镁发生“格式反应”的卤代烷相互作用可迅速发生反应形成新型含镁络合物溶液。该络合物在溶液中可析出结晶。具有特定的化学结构．可以均匀承载于多孔硅胶的孔隙中，负载TiCl4后制备出形态良好的球形高效乙烯集合催化剂。     

Kinetics of thermo-fixation of solvent dyes and pigments in polyester fibres

The diffusion coefficient of a dye in fibres is critical to understanding the dyeing process and coloration quality of products. In this paper, the diffusion kinetics of solvent dyes in the thermosol dyeing of polyester fibres was studied by measuring K / S of the dyed polyester fabrics based on the Kubelka–Munk equation. The diffusion coefficients of two model solvent dyes were estimated with Hill's equation using the experimentally measured K / S values and were found to be in good agreement with those calculated from the traditional extraction method. Such a measurement method was applied to several other solvent dyes and pigments that have different molecular sizes and a good correlation between the measured diffusion coefficients and sizes of these dyes and pigments was found. The results indicate that it is feasible to use K / S measurement of dyed fabrics and Hill's equation to evaluate the kinetics of the thermosol dyeing process under certain conditions.     

盐酸丁咯地尔合成研究

盐酸丁咯地尔是治疗脑部及末梢血管障碍的血管扩张药,本文介绍并评价了盐酸丁咯地尔的几个合成路线.     

纳米有机蒙脱土改性邻甲酚醛环氧树脂的研究

利用插层复合技术制备了邻甲酚醛环氧树脂／蒙脱土纳米复合材料，对固化产物利用X射线衍射(XRD)分析有机蒙脱土的层间距变化。通过对复合材料的力学性能测试表明，少量有机化蒙脱土的加入可以较大地提高材料的拉伸强度和冲击强度，起到了同时增韧增强的作用。并且环氧树脂／蒙脱土复合材料的热分解温度和热变形温度也有明显提高。     

Accelerating sequential programs on commodity multi-core processors

A recently proposed pipelined multithreading (PMT) technique exhibits wide applicability in parallelizing general sequential programs on multi-core processors. However, significant inter-core communication overhead limits PMT performance and prevents its commercial utilization. A simple and effective clustered pipelined multithreading (CPMT) approach is presented to accelerate sequential programs on commodity multi-core processors. This CPMT technique adopts a clustered communication mechanism that can yield very low average communication overhead by eliminating false sharing as well as reducing communication operation and transit delays in the software-only approach. A single-producer/single-consumer concurrent lock-free clusteredQueue algorithm based on a two-level queue structure is also proposed. The accuracy of CPMT is theoretically demonstrated. The performances of the algorithm and CPMT are evaluated on a commodity AMD Phenom four-core processor. The number of enqueue and dequeue times of the algorithm are 20.8 and 23 cycles given an appropriate parameter, respectively. The speedup of CPMT ranges from 13.1% to 119.8% for typical loops extracted from the SPEC CPU 2000 benchmark suite.     

抗氧剂BHT结晶工艺研究

BHT结晶采用乙醇作为溶剂。对不同浓度的乙醇,改变溶质与溶剂的物料配比,测定了BHT溶液的出晶点温度。结果表明:在乙醇浓度一定的条件下,出晶点温度随BHT与乙醇配比的增大而降低;而在相同物料配比的条件下,乙醇浓度越低,出晶点温度越高。