CCD传感器实时检测系统在微细电火花加工机床上校正法的研究

CCD(Charge-Couple Device)传感器实时检测系统是一套基于光电检测技术的质量监测仪器,可用于实时观测和测量被加工工件,特别适合安装应用于微细电火花加工机床.本文就该系统安装在电火花加工机床上后如何提高检测精度进行研究,提出了3种方法对该检测系统进行校正,如,整体校准常数、C值校正、D值校正.此后设计实验来检验校准后该系统的稳定性和精确度,从而验证了所提出的三步校正法的可靠性.     

绿色校园建设的思考与实践——以常州工学院新校区绿建设计为例

文章简要介绍了常州工学院新校区建设的基本情况,并根据该校绿色校园的建设目标,从绿色建筑评价标准和设计流程的角度分析了程序式绿色校园设计的优点、缺点和解决方法,最后指出绿色校园设计是满足学校和设计方可持续发展目标的共同需要。     

安多霖对高功率微波照射大鼠性激素和氧化还原系统的影响

选用SD和Wistar大鼠为研究模型。将SD大鼠分为对照组、模型组、6和12 g/kg给药组,给药组动物安多霖连续灌胃30天,100 mW/cm2微波全身照射10分钟,照后24小时取全血分离血清,放射免疫法检测血清睾酮和卵泡刺激素（FSH）活性。将Wistar大鼠分为模型组、3、6和9 mg/kg给药组,给药组动物安多霖连续给药7天,以100 mW/cm2微波照射15分钟,照后继续给药至照后3、7和10天,取血分离血清,分光光度法检测血清过氧化氢酶（CAT）、谷胱甘肽过氧化物酶（GSH-Px）活性和还原型谷胱甘肽（GSH）含量。结果显示,照后SD雄性大鼠血清睾酮含量较对照组显著降低（p〈0.05）,但给药组降低的幅度低于模型组,如12g/kg组与对照组之间无明显差异。从CAT、GSH-Px和GSH的分析结果看,安多霖可不同程度地提高Wistar大鼠血清CAT、GSH-Px活性和GSH含量,尤其是照后7天,6和9 mg/kg给药组GSH-Px活性较模型组有明显的提升（p〈0.05）。从以上结果可以得出,安多霖对微波辐射损伤的大鼠具有一定的保护作用。     

TRIP带钢轧后冷却过程温度场的有限元模拟

应用有限元模拟仿真计算，对相变诱发塑性(TRIP)带钢在连轧机精轧后由850～890℃快冷至700℃，经几秒钟短暂空冷再第2次快速水冷至卷取温度400℃的冷却过程的温度进行了分析计算。分析结果得出，3mmTRIP带钢厚度方向的温差较小，而8mmTRIP带钢厚度方向温差明显增大。因此TRIP带钢在2次快速冷却后和卷取前应有适当的空冷时间以降低TRIP带钢卷取时表面和厚度方向中心处的温度差。     

稳定化处理工艺参数对预应力钢绞线性能的影响

通过对预应力（ＰＣ）钢绞线稳定化处理及随后的破断、应力松驰试验，分析了处理前后强度、塑性、松驰率指标的变化趋势，得出了工艺温度、张应力对性能指标的影响规律，进而提出稳定化处理的最佳工艺参数。     

Procedural Synthesis using Vortex Particle Method for Fluid Simulation

We propose a fast and effective technique to improve sub‐grid visual details of the grid based fluid simulation. Our method procedurally synthesizes the flow fields coming from the incompressible Navier‐Stokes solver and the vorticity fields generated by vortex particle method for sub‐grid turbulence. We are able to efficiently animate smoke which is highly turbulent and swirling with small scale details. Since this technique does not solve the linear system in high‐resolution grids, it can perform fluid simulation more rapidly. We can easily estimate the influence of turbulent and swirling effect to the fluid flow.     

Comments on “Wirtinger-based integral inequality: Application to time-delay systems [Automatica 49 (2013) 2860–2866]”

In a recent paper (Automatica 49 (2013) 2860–2866), the Wirtinger-based inequality has been introduced to derive tractable stability conditions for time-delay or sampled-data systems. We point out that there exist two errors in Theorem 8 for the stability analysis of sampled-data systems, and the correct theorem is presented.     

地埋管地源热泵水系统的若干问题研究

结合调研测试的实际工程,根据实际工程中地埋管地源热泵系统中水系统的形式及特点,归纳了设计、运行管理、设备故障等几个方面的水系统常见的问题。探讨了地埋管地源热泵水系统的设计问题,指出某些工程水系统存在的问题及解决思路;分析水系统故障的原因及表现,通过对水系统运行状态的观察与测试,从机组COP及系统能效比的角度分析水系统故障的影响：对于运行管理方面,提出相应的水系统形式的运行建议,为优化地埋管地源热泵的设计及运行管理提供了相应参考。     

Creation of Nonspherical Microparticles through Osmosis‐Driven Arrested Coalescence of Microfluidic Emulsions

Droplet‐based microfluidics enable the production of emulsions and microparticles with spherical shapes, but the high‐throughput fabrication of nonspherical emulsions and microparticles still remains challenging because interfacial tension plays a dominant role during preparation. Herein, ionic liquids (ILs) containing salts, which possess sufficient osmotic pressure to realize water transport and phase separation, are introduced as inner cores of oil‐in‐oil‐in‐water double emulsions and it is shown that nonspherical emulsions can be constructed by osmosis‐driven arrested coalescence of inner cores. Subsequently, ultraviolet polymerization of the nonspherical emulsions leads to nonspherical microparticles. By tailoring the number, composition, and size of inner cores as well as coalescence time, a variety of nonspherical shapes such as dumbbell, rod, spindle, snowman, tumbler, three‐pointed star, triangle, and scalene triangle are created. Importantly, benefitting from excellent solvency of ILs, this system can serve as a general platform to produce nonspherical microparticles made from different materials. Moreover, by controlling the osmotic pressure, programmed coalescence of inner cores in double emulsions is realizable, which indicates the potential to build microreactors. Thus, a simple and high‐throughput strategy to create nonspherical microparticles with arrested coalescence shapes is developed for the first time and can be further used to construct novel materials and microreactors.     

Studied on a novel human keratinocyte membrane delivery system in vitro

The culture of keratinocytes on flexible membranes has been proposed as a means to simplify, accelerate and improve the efficiency with which proliferating cells are delivered to full thickness or non-healing skin defects. The purpose of this article was to study the ability of chitosan-gelatin manbranes to facilitate the growth of human keratinocytes. The membranes with different chitosan contents were studied. The surface properties of chitosan-gelatin membranes were investigate by SEM, and water contact angle test. The mechanical property of the membranes was tested. Data implied that gelatin could make the membranes more flexible and hydrophilic than chitosan membranes, which may regulate the seeded cells behavior. Loading human keratinocytes on chitosan-gelatin membranes, cells attachment, spread, and growth were investigated by light microscopy, SEM, and MTT test. The results suggested that the adhesion and proliferation of keratinocytes seeded on chitosan-gelatin membranes were same as on tissue culture plate, in which gelatin could modify the interaction between keratinocytes and chitosan membranes. Therefore, chitosan-gelatin membrane is a good candidate for keratinocytes delivery system.