Aspects of dSpace in contemporary design

Computer dependent design space is illustrated with the recent international competition project for Kowloon Arts Center. The spatial condition of design resulted from the deployment of Euclidian geometry and use of the nonrational, complex surfaces. Another aspect of computer dependent space was rooted in the contemporary work situation where architects located on the three different continents collaborated in distributed mode over the internet. The resulting project confirms the creative potential of the above aspects of the digital space in contemporary design.     

The phenomena of the interaction of Nd3+-glass laser light with 6H13 alloy steel

The variation in the physical and chemical structure of the 6H13 alloy steel irradiated by laser light have been investigated. The phenomena of the capillary waves within the power density range (4.3×10⁹<P<13.8×10⁹) watt/m² have been observed and the hydrodynamic parameters of alloy steel have been determinated. The nature of the laser light interaction with metal is discussed in electronmicroscopy and X-rays analysis terms.     

Evaluation of patterned stimulation for use in surface functional electrical stimulation systems

From a gerontological point of view, social work which accompanies care processes is absolutely necessary. The social production of care depends crucially on an appropriate attention toward the fitting between informal and formal help systems. Social work can support these fitting processes both on a firm level and on a neutral level. Some specific attributes of social work with elder care-dependant living in their private homes are discussed, such as threatening, difficult or ashaming aspects, as well as the necessity of all involved persons agreeing in the developed help-planning process. Practice research and Social science perspectives are discussed as appropriate reference system for life-world orientated social work with informal caregiving arrangements. Concerning the support of informal caregivers as an important example of ambulant social work with elder people, some dimensions of theoretical and practical professionality are proposed.     

Effect of molybdenum on the fracture characteristic of high-speed steel quenched matrix

The fractures of three model alloys, imitating by their chemical composition the matrixes of the quenched high-speed steels of various Mo: W relations were analyzed. According to the measurements of the stress intensity factor K_Ic and the differences in the precipitation processes of carbides it was found out that the higher fracture toughness of the matrix of the molybdenum high-speed steels than on the tungsten ones is the results of the differences in the kinetics of precipitation from the martensite matrix of these steels during tempering. After tempering at 250 and 650°C the percentage of the intergranular fracture increases with the increase of the relation of Mo to W in the model alloys of the high-speed steel matrix. This is probably the result of higher precipitation rate of the M₃C carbide (at 250°C) and the MC and M₆C carbides (at 650°C) in the privileged regions along the grain boundaries. The change of the character of the model alloy fractures after tempering at 450°C from the completely transgranular one in the tungsten alloy to the nearly completely intergranular one in the molybdenum alloy indicates that the coherent precipitation processes responsible for the secondary hardness effect in the tungsten matrix begin at a lower temperature than in the molybdenum matrix. After tempering for the maximum secondary hardness the matrix fractures of the high-speed steels reveal a transgranular character regardless the relation of Mo to W. The higher fracture toughness of the Mo matrix can be the result of the start of the coherent precipitation processes at a higher temperature and their intensity which can, respectively, influence the size of these precipitations, their shape and the degree of dispersion. The transgranular character of the fractures of the S 6-5-2 type high-speed steel in the whole range tempering temperatures results from the presence of the undissolved carbides which while cracking in the region of stress concentration can constitute flaws of critical size which form the path of easy cracking through the grains. The transgranular cracking of the matrix of the real high-speed steels does not change the adventageous influence of molybdenum upon their fracture toughness. On the other hand, the carbides, undissolved during austenitizing, whose size distribution in the molybdenum steels from the point of view of cracking mechanics seems to be unsatisfactory, influence significantly the fracture toughness of these steels.     

Synthesis of passive networks containing periodically operated thyristors

This paper gives a new approach to the designing of power electronic networks. A method for the determination of passive time-varying networks is given when time functions of the excitation and response are given. These time functions are periodic. the period is divided into intervals. the network is linear and time-invariant in each interval. A sequence of the linear time-invariant networks is realized using switches. Switched windings of a multiport transformer are defined. Such elements enable one to realize the sequence of the linear time-invariant networks. Conditions for the substitution switches for thyristors are formulated. A structure of a thyristor converter is presented as an example.     

Annular Impinging Jet Controlled by Radial Synthetic Jets

This experimental study focuses on generation and control of annular impinging jets. The annular nozzle used in the investigations was designed with an active flow control system using 12 synthetic jets issuing radially from the central nozzle body. Measurements of the control effects were made on the impingement wall. The data acquisition involved wall pressure and wall mass transfer (by the naphthalene sublimation technique) using air as the working fluid. Also measured was time-mean flow velocity (by a Pitot probe) in the jet flow field. Moreover, flow visualization was carried out. Two main flow-field patterns (A and B) were identified. The patterns differ in the size of the separated-flow recirculation regions that develop attached to the nozzle central body: While pattern A is characterized by a quite small recirculation region (bubble) extending not far from the nozzle exit, pattern B exhibits a large recirculation region, reaching up to the impingement wall, on which it forms a stagnation circle. The control action modifies the flow field, resulting in changes of the corresponding heat/mass transfer distributions. The convective transfer rate on the stagnation circle can be demonstrably enhanced by 20% at a moderate nozzle-to-wall distance, equal to 0.6 of the nozzle outer diameter.     

Two-phase cooling characteristics of a saturated free falling circular jet of HFE7100 on a heated disk: Effect of jet length

Direct jet impingement boiling heat transfer operating at low flow rates is of great interest for the localized moderate heat fluxes from the targets with delicate mechanical structure, where the aggressive techniques such as high-speed jets are not suitable. Boiling heat transfer from an upward facing disk targeted by a falling jet was studied experimentally at different volumetric flow rates and various jet lengths. The working fluid was chosen to be the dielectric liquid HFE7100 and the heated spot was an 8-mm diameter disk. Using previous CHF correlations in their original form, valid at very low volumetric flow rates, results in large disagreements since it was found that variation in the jet length changes the boiling characteristics. It is demonstrated that although the circular hydraulic jump formation within the heater diameter may suppress the heat transfer under certain conditions, moving the jet closer to the target may significantly improve the boiling curves at the critical heat flux (CHF) regime. At low flow rates, the CHF increases as the jet length decreases while for moderate and high flow rates the boiling curves show approximately a universal behavior for different jet lengths. For such low flow rates, the effect of jet length on boiling curves was shown to be related to the variation of the cross section of the falling jet and the formation of hydraulic jump at radial distances smaller than the heater diameter. The current CHF results for different jet lengths are correlated by including the effect of jet length in the previous correlation proposed by Sharan and Lienhard.     

The forming limit curve for bending processes

The maximum strain that metal can suffer in some bulk forming processes is limited by the phenomenon of shear band formation, which precedes ductile fracture. The process of strain localization in the shear band has been analysed theoretically on the basis of the theory of plastic flow. It is assumed that the material does not only undergo strain-hardening, but also strain-softening, due to the growth and coalescence of voids and microcracks. Taking into account the post-stability stage of the strain localization process the limit strain, i.e. the maximum strain outside the shear band has been determined as a function of stress ratio. The theoretically predicted forming limit curve for bending processes shows satisfactory correlation with the curve obtained experimentally for 0.39% C carbon steel. In both cases the limit strain reaches its minimum for plane states of strain. The analysis does not include plastic anisotropy, strain rate sensitivity and other metallurgical features of the material.