WO3/BiVO4 composite photoelectrode prepared by improved auto-combustion method for highly efficient water splitting

We report on the improvement in the water splitting efficiency of a WO₃/BiVO₄ composite photoelectrode by the application of an improved auto-combustion method to the preparation of porous BiVO₄ thin films. The unique feature of this preparation method is the addition of both NH₄NO₃, as a strong oxidizing agent, and an organic additive into BiVO₄ precursor solution. The local decomposition heat of the organic additive and oxidizing agent created a porous film with small, highly crystalline BiVO₄ particles. The photoelectrode has many advantages over existing ones, such as the high light-harvesting efficiency (LHE), a single BiVO₄ phase, the facile access of the holes to the photoelectrode/electrolyte interface, and the ease of water and oxygen diffusion. The maximum incident photon-to-current efficiency (IPCE) was estimated to be 64% (at 440 nm, 1.23 V vs. RHE) and the applied bias photon-tocurrent efficiency (ABPE) reached as high as 1.28%. This ABPE value is highest among all oxide semiconductor photoelectrodes reported previously, except for the case of a stacking photoelectrode system.     

Polymerized ionic liquids with guanidinium cations as host for gel polymer electrolytes in lithium metal batteries

Polymerized ionic liquids (PILs) having guanidinium cations with different counter‐anions, such as PF₆^? and N(CF₃SO₂)₂^? (TFSI^?), were synthesized by copolymerization of a guanidinium ionic liquid monomer with methyl acrylate followed by an anion exchange reaction. Furthermore, incorporating a guanidinium ionic liquid, LiTFSI salt and nano‐size SiO₂, a quaternary gel polymer electrolyte based on one of the PILs as the polymer host was prepared. The quaternary gel polymer electrolyte was chemically stable even at a higher temperature of 80 °C in contact with the lithium anode. In particular, the electrolyte exhibited high lithium ion conductivity, wide electrochemical stability window and good lithium stripping/plating performance. Li/LiFePO₄ batteries with the quaternary gel polymer electrolyte at 80 °C had capacities of 140 and 130 mA h g^?1 respectively at 0.1 and 0.2 C current rates. Copyright © 2011 Society of Chemical Industry     

Impact of compression,physical aging,and freezing rate on the crystallization characteristics of an amorphous sugar matrix

Amorphous matrices made up of sugar molecules, are frequently used in food and pharmaceutical industries. A drawback to their use is that they are susceptible to collapse, as a result of water uptake and an increase in temperature and subsequently crystallize. Herein, the crystallization characteristics of amorphous sugar (sucrose and α-lactose) preparations were analyzed, with the purpose of obtaining knowledge that could lead to the prediction of how long the amorphous state is retained under various conditions. The impact of compression, physical aging and freezing rate on the induction period (t_ind) for crystallization were examined. Freeze-dried sugar samples were compressed at 74 or 443 MPa (5 min) and then rehumidified at specified RHs. Some freeze-dried sucrose samples were physically aged, and alternatively freeze-drying was conducted under different conditions. The isothermal crystallization of the prepared samples at different temperatures (T), the glass transition and the crystallization temperature (T_cry) were measured, using differential scanning calorimetry. The compression markedly decreased the t_ind, while significantly lowered the hygroscopicity. Physical aging and slower-freezing also shortened the t_ind. The t_ind was found to be correlated exclusively with (T_cry–T), regardless of rehumidification, compression, sugar type, physical aging and freezing rate in the freeze-drying process.     

Study on the fabrication of a SU-8 cantilever vertically-allocated in a closed fluidic microchannel

Microsystem Technologies - This paper describes the fabrication of a vertically-allocated SU-8 cantilever in a closed fluidic channel. The difficulties to fabricate the vertically-allocated SU-8...     

Phase transformation and interface segregation behavior in Si3N4 ceramics sintered with La2O3–Lu2O3 mixed additive

Microstructure and mechanical property of silicon nitride (Si₃N₄) ceramic are strongly dependent on the selection of sintering additives. When rare‐earth (RE) oxide is used as the sintering additive, segregation of RE ions at interface between Si₃N₄ grain and intergranular glassy film (IGF) is believed to play a critical role. Although the ionic radius of RE ion is known to be an empirical parameter to modify the mechanical property, the correlation between the segregated ions and their ionic radii is still under controversy. In order to address this issue, (i) rate of α‐β phase transformation and (ii) segregation behavior at the interface were studied for Si₃N₄ ceramics sintered using mixture of La₂O₃ and Lu₂O₃ as additives in this study. Specimens of Lu content 30% and higher exhibited lower activation energies for the α‐β phase transformation as compared with those of Lu content 20% and lower. In terms of the segregation behavior, La was preferably segregated at one site and Lu at the other site along β‐Si₃N₄/IGF interface in the specimens of Lu content 30% and higher. It is understood from these results that Lu segregation site should be more closely related with grain growth.     

Hydrogenation and structural properties of Gd2Ni7 with superlattice structure

The crystal structure and hydrogenation properties of Ce₂Ni₇-type Gd₂Ni₇ were investigated by X-ray diffraction (XRD) and the hydrogen pressure–composition (P–C) isotherm. Ce₂Ni₇-type Gd₂Ni₇ was obtained by annealing at 1523 K for 12 h and quenching in ice water. Two superlattice reflections (002 and 004) of the Ce₂Ni₇-type were clearly observed at 2θ = 7.3° and 14.6° in the XRD profile. The refined lattice parameters were a = 0.49662(9) nm and c = 2.4255(3) nm, respectively. Two plateaus were clearly observed during the absorption–desorption process in the P–C isotherm. The first and second plateaus were at 0.015 and 0.13 MPa, respectively, in the first desorption. The maximum hydrogen capacity reached was 1.13 H/M. The enthalpy and entropy were calculated as −20 kJ/mol H₂ and −80 J/mol H₂ K, respectively, from the van’t Hoff plot. After the P–C isotherm, the GdNi₅ cell expanded by 2.15%, but the Gd₂Ni₄ cell shrank by 2.83%.     

Fabrication of fluorine-terminated diamond-like carbon thin film using a hyperthermal atomic fluorine beam

Surface modification of diamond-like carbon (DLC) film was performed using a hyperthermal atomic fluorine beam on the purpose of production of hydrophobic surface by maintaining the high hardness of DLC film. By the irradiation of atomic fluorine beam of a 1.0 × 10²⁰ atoms/cm², the contact angle of a water drop against the DLC surface increased from 73° to 111°. The formation of CF₃, CF₂ and CF bonding on the modified DLC surface was confirmed from the measurements of X-ray photoelectron spectra and near-edge X-ray absorption fine structure spectra. Irradiation of hyperthermal atomic fluorine beam was concluded to produce insulator fluorine-terminated DLC film, which has high F content on the surface, by the taking of the use of neutral atomic beam as a fluorine source.