Upregulation of aquaporin 2 water channel expression in pregnant rats

Water retention is characteristic of pregnancy but the mechanism(s) of the altered water metabolism has yet to be elucidated. The collecting duct water channel, aquaporin 2 (AQP2), plays a pivotal role in the renal water regulation, and we hypothesized that AQP2 expression could be modified during pregnancy. Sprague-Dawley female rats were studied on days 7 (P7), 14 (P14), and 20 (P20) of pregnancy, and expression of AQP2 in papillae was examined. Nonpregnant (NP) littermates were used as controls. Plasma osmolalities were significantly lower in pregnant rats by day 7 of gestation (P7 283.8+/-1.82, P14 284.3+/-1.64, P < 0.001, P20 282. 4+/-1.32, P < 0.0001, vs. NP 291.8+/-1.06 mosmol/kgH2O). However, plasma vasopressin concentrations in pregnant rats were not significantly different than in nonpregnant rats (NP 1.03+/-0.14, P7 1.11+/-0.21, P14 1.15+/-0.21, P20 1.36+/-0.24 pg/ml, NS). The mRNA of AQP2 was increased early during pregnancy: AQP2/beta actin: P7 196+/-17.9, P14 200+/-6.8, and P20 208+/-15.5%, P < 0.005 vs. NP (100+/-11.1%). AQP2 protein was also increased during pregnancy: AQP2 protein: P7 269+/-10.0, P14 251+/-12.0, P < 0.0001, and P20 250+/-13.6%, P < 0.001 vs. NP (100+/-12.5%). The effect of V2 vasopressin receptor antagonist, OPC-31260, was then investigated. AQP2 mRNA was suppressed significantly by OPC-31260 administration to P14 rats (AQP2/beta actin: P14 with OPC-31260 39.6+/-1.7%, P < 0.001 vs. P14 with vehicle) and was decreased to the same level of expression as NP rats receiving OPC-31260. Similar findings were found with the analysis of AQP2 protein. The decreased plasma osmolality of P14 rats was not modified by OPC-31260. The results of the study indicate that upregulation of AQP2 contributes to the water retention in pregnancy through a V2 receptor-mediated effect. In addition to vasopressin, other factors may be involved in this upregulation.     

Evaluation of mixing profiles for a new micromixer design strategy

The relationship between mixing history and reaction performance in microreactors using computational fluid dynamics (CFD) simulations is identified. In the idealized, simplified mixing model, mixing proceeds linearly and only the mixing time determined the reaction performance. However, in the case of realistic models where mixing proceeds unequally, the partial rapid progression of mixing, more than the mixing time, significantly impacts the reaction. The use of the fluid segment size distribution to capture this effect is proposed. The effective Damköhler number derived from the fluid segment size distribution predicted the reaction yield well. To demonstrate the utility of the mixing profile design strategy, we fabricated a novel micromixer with multiple partial rapid mixing zones. This micromixer achieved excellent results both in a CFD simulation and an experiment. © 2015 American Institute of Chemical Engineers AIChE J, 62: 1154–1161, 2016     

Multi-objective topology optimization of multi-component continuum structures via a Kriging-interpolated level set approach

This paper explores a framework for topology optimization of multi-component sheet metal structures, such as those often used in the automotive industry. The primary reason for having multiple components in a structure is to reduce the manufacturing cost, which can become prohibitively expensive otherwise. Having a multi-component structure necessitates re-joining, which often comes at sacrifices in the assembly cost, weight and structural performance. The problem of designing a multi-component structure is thus posed in a multi-objective framework. Approaches to solve the problem may be classified into single and two stage approaches. Two-stage approaches start by focusing solely on structural performance in order to obtain optimal monolithic (single piece) designs, and then the decomposition into multiple components is considered without changing the base topology (identical to the monolithic design). Single-stage approaches simultaneously attempt to optimize both the base topology and its decomposition. Decomposition is an inherently discrete problem, and as such, non-gradient methods are needed for single-stage and second stage of two-stage approaches. This paper adopts an implicit formulation (level-sets) of the design variables, which significantly reduces the number of design variables needed in either single or two stage approaches. The number of design variables in the formulation is independent from the meshing size, which enables application of non-gradient methods to realistic designs. Test results of a short cantilever and an L-shaped bracket studies show reasonable success of both single and two stage approaches, with each approach having different merits.     

A reduction method of dynamic false contour utilizing the frame‐rate‐control method with suppression of the side effect on PDPs

Abstract— The plasma‐display panel (PDP) is a type of flat‐panel display that can display a high‐quality image. However, when moving images are displayed, annoying disturbances such as false contour noise occurs. This noise is called dynamic false contour (DFC). To achieve a higher‐quality image, DFC has to be reduced. Therefore, a new method to reduce DFC is proposed. To find a way to reduce DFC, a new evaluation value for it has been defined: the evaluation value of dynamic false contour (EVDFC). This value is defined on the basis of a person's subjective evaluation. By applying this value, the cause that generates DFC can be identified. On the basis of these studies, a new method for reducing DFC by applying frame‐rate control (FRC) with suppression of the side effect is proposed. This improved method can be used to provide high‐quality images.     

Compression molding and melt‐spinning of the blends of poly(lactic acid) and poly(butylene succinate‐co‐adipate)

Poly(lactic acid) (PLA) is a biobased polymer made from biomass having high mechanical properties for engineering materials applications. However, PLA has certain limited properties such as its brittleness and low heat distortion temperature. Thus, the aim of this study is to improve toughness of PLA by blending with poly(butylene succinate‐co‐adipate) (PBSA), the biodegradable polymer having high toughness. Polymer blends of PLA and PBSA were prepared using a twin screw extruder. The melt rheology and the thermal property of the blends were examined. Further the blends were fabricated into compression molded parts and melt‐spun fiber and were subjected to tensile and impact tests. When the PBSA content was low, PBSA phase was finely dispersed in the PLA matrix. On the other hand, when the PBSA content was high, this minor phase dispersed as a large droplet. Mechanical properties of the compression molded parts were affected by the dispersion state of PBSA minor component in PLA matrix. Impact strength of the compression molded parts was also improved by the addition of soft PBSA. The improvement was pronounced when the PBSA phase was finely dispersed in PLA matrix. However, the mechanical property of the blend fibers was affected by the postdrawing condition as well as the PBSA content. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41856.     

Pose-Invariant Facial Expression Recognition Using Variable-Intensity Templates

In this paper, we propose a method for pose-invariant facial expression recognition from monocular video sequences. The advantage of our method is that, unlike existing methods, our method uses a simple model, called the variable-intensity template, for describing different facial expressions. This makes it possible to prepare a model for each person with very little time and effort. Variable-intensity templates describe how the intensities of multiple points, defined in the vicinity of facial parts, vary with different facial expressions. By using this model in the framework of a particle filter, our method is capable of estimating facial poses and expressions simultaneously. Experiments demonstrate the effectiveness of our method. A recognition rate of over 90% is achieved for all facial orientations, horizontal, vertical, and in-plane, in the range of ±40 degrees, ±20 degrees, and ±40 degrees from the frontal view, respectively. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Performances of metal fluoride added carbon anodes with pre-electrolysis for electrolytic synthesis of NF3

Metal fluoride added carbon anodes treated by pre-electrolysis were investigated for electrolytic production of nitrogen trifluoride (NF₃) in molten NH₄F·KF·4HF at 100 °C. The conditions for pre-electrolysis were first optimized using a graphite sheet anode as a model anode. The formation of fluorine-graphite intercalation compounds (fluorine-GICs) with semi-covalent C–F bonds, (C_xF)_n, on the MgF₂ and CaF₂ added carbon anode surface was accelerated by pre-electrolysis at potentials less than 4.0 V. Critical current densities (CCD) on the MgF₂ added carbon anodes pre-electrolyzed under various conditions were determined, and the highest CCD was 290 mA cm⁻² obtained for that pre-electrolyzed at 3.5 V for 500 C cm⁻². This anode was successfully used in the electrolysis at 100 mA cm⁻² for 290 h and the maximum NF₃ current efficiency was 55%. From these results, it was concluded that the metal fluoride added carbon anode treated by pre-electrolysis has a high potential for electrolytic production of NF₃ at higher current density.     

Rate acceleration of Diels–Alder reactions utilizing a fluorous micellar system in water

A fluorous micellar system in water has been created to produce a large interfacial area between these media that retains substrates, effectively facilitating intermolecular Diels–Alder reactions due to repulsion effects from both media. Because LiFOS functioned not only as a surfactant but also as a supporting electrolyte, an electrochemical approach could be introduced to evaluate the rate acceleration effects. The measurement of the particle size distribution of the fluorous micelles clearly supported these evaluations.     

Synthesis of sulfonated organic–inorganic hybrids through the radical copolymerization of vinyl sulfonate esters and vinyl trialkoxysilanes

Novel organic–inorganic hybrids with sulfonic acid groups were prepared using random copolymers composed of vinyl sulfonate esters and vinyl trialkoxysilanes. Five vinyl sulfonate esters with different substituent groups were employed as protecting monomers for the production of the poly(vinyl sulfonic acid) component, and three vinyl trialkoxysilanes were used as cross-linkable monomers. Free radical and reversible addition-fragmentation chain transfer (RAFT) copolymerizations were performed for the production of random copolymers with two different functional groups. The selective deprotection of the sulfonate esters of the copolymers proceeded smoothly and resulted in the formation of copolymers with lithium vinyl sulfonate units and cross-linkable trialkoxysilane units. The co-condensation of the trialkoxysilane moieties in the deprotected copolymers with cross-linkers yielded transparent hybrid films that contained lithium sulfonate groups without aromatic rings or ester linkages.     

Determination of optical purity and absolute configuration of natural 12‐hydroxystearic acid by the 1H NMR anisotropy method

The enantiopure of (R)‐(?) MαNPA was allowed to react with racemic 18‐(tert‐butyldimethylsilyloxy)‐5‐octadecayne‐7‐ol which was derived from dodecane‐1,12‐diol, yielding diastereomeric esters mixture. These racemic esters were easily separated by HPLC on silica‐gel. The absolute configurations of the first‐eluted diastereomeric esters from the separated esters were determined using ¹H NMR anisotropy method. Analysis on ¹H NMR spectra and HPLC elution time of the synthesized esters and those of MαNP ester derived from natural methyl‐12‐hydroxystealate showed that the absolute configuration of natural 12‐hydroxystearic acid was R form, and the enantiomeric excess was over 99%.