IAEA activities on Mmall and Medium Reactors: Harmonization of energy demand and supply in developing countries

Small and Medium Reactors (SMRs) are attractive in developing countries because of their unique features such as: better suitability for smaller electric grids, lower investment cost, smaller components and equipment to facilitate modularization, etc. Furthermore, other factors induced by SMR implementation, such as technical transfer promotion, domestic infrastructure improvement, stabilization of energy cost, and environmental protection put SMRs into a more favorable position. From the nuclear plant suppliers, many SMR designs are available for a wide range of applications. A questionnaire study, which the IAEA conducted in 1996, confirmed that several countries are interested in SMRs and that some SMRs are already in the detailed design stage. A projection shows that the total nuclear capacity would increase in all regions that consist mainly of developing countries in the near future. For a timely and broad implementation of SMRs, information exchange and cooperation are indispensable between nuclear suppliers and buyers. The IAEA continues to play a role in encouraging and assisting development and practical application of SMRs for harmonization of energy demand and supply in developing countries.     

Pb1−x Bi x /Bi/Pb1−x Bi x Josephson junction

A superconductor/semimetal/superconductor (S/SM/S) Josephson junction has been developed. We have used an alloy of Pb_1–x Bi _x (0x 0.6) as the superconductor and Bi as the semimetal. By irradiating at X-band microwave of 10 GHz, Shapiro steps were observed for various bismuth barrier thicknesses inÅ and bismuth weight ratiosx. Finally, we obtained the empirical relationship for barrier thickness, below which microwaves could be detected for various bismuth weight ratiosx at the temperature of 4.2 K.     

Effect of Grain Boundaries on Thermal Conductivity of Silicon Carbide Ceramic at 5 to 1300 K

The thermal conductivity of a SiC ceramic was measured as 270 W·m⁻¹·K⁻¹ at room temperature. At low temperatures ( T < 25 K), the decrease in the conductivity was proportional to T ³ on a logarithmic scale, which indicated that the conductivity was controlled by boundaries. The calculated phonon mean free path in the ceramic increased with decreased temperature, but was limited to ∼4 μm, a length almost equal to the grain size, at temperatures below 30 K. We concluded that the thermal conductivity of the ceramic below 30 K was influenced significantly by grain boundaries and grain junctions.     

Synthesis of tetramethyl-p-silphenylenesiloxanedimethylsiloxane triblock copolymer by employing living anionic polymerization

Dimethylsiloxane-tetramethyl-p-silphenylenesiloxane-dimethylsiloxane (DMS-TMPS-DMS) triblock copolymer was synthesized by employing living anionic polymerization of hexamethylcyclotrisiloxane (D₃). Two synthetic methods were carried out for the polymerization. One of those methods was the anionic polymerization of D₃ initiated at the silanolate anion which was prepared from the terminal hydroxyl group of silanol-terminated TMPS prepolymer by reaction with n-butyllithium (method 1). The other was the coupling reaction of vinyl-terminated TMPS prepolymer with hydrosilyl-terminated DMS prepolymer obtained from the anionic polymerization of D₃ by using diphenylmethylsilanolate anion as initiator (method 2). In method 1, DMS contents of the copolymers ranged from 25.8 to 72.5 wt% and the values agreed with the ratio of D₃ to TMPS prepolymer. The weight-average molecular weights ranged from 1.36×10⁴ to 19.4×10⁴ and were close to the predicted values calculated from the $\text{M}\text{?}{}_{\mathrm{v}}$ of the TMPS prepolymer and the amount of D₃ added. In the case of method 2, weight-average molecular weights ranged from 19.5×10⁴ to 24.2×10⁴. The high molecular weight copolymer could thus be obtained by method 2. Intrinsic viscosity values of the triblock copolymers agreed with calculated values obtained by considering the copolymer as a binary mixture of these homopolymers. Differential scanning calorimetry and thermogravimetry were carried out on the triblock copolymers. The equilibrium melting temperatures of each of the copolymers were very close to that of poly-TMPS (160°C). The glass transition temperature and heat of fusion were decreased as the DMS content was increased. The thermogravimetric curves for the copolymers indicated that the thermal stability of the triblock copolymer was intermediate between the DMS and TMPS homopolymers.     

Characterization and Sintering Behavior of Alkoxide-Derived Aluminosilicate Powders

Submicrometer SiO₂-Al₂O₃ powders with compositions of 46.5 to 76.6 wt% Al₂O₃ were prepared by hydrolysis of mixed alkoxides. Phase change, mullite composition, and particle size of powders with heating were analyzed by DTA, XRD, IR, BET, and TEM. As-produced amorphous powders partially transformed to mullite and Al-Si spinel at around 980°C. The compositions of mullite produced at 1400° and 1550°C were richer in Al₂O₃ than the compositions of stable mullite solid solutions predicted from the phase diagram of the SiO₂-Al₂O₃ system. Particle size decreased with increasing Al₂O₃ content. The sintered densities depended upon the amount of SiO₂-rich glassy phase formed during sintering and the green density expressed as a function of particle size.     

Decolorization and mineralization of Oolong tea polyphenols in colored soft drink wastewater by photo Fenton reaction

The decolorization and the mineralization of the colored soft drink wastewater including Oolong tea polyphenols by the photo Fenton reaction have been investigated. The decolorization of the colored soft drink wastewater including Oolong tea polyphenols by the photo Fenton reaction could be divided into 3 phases. Just after H2O2 was added to the solution, the color of the solution immediately increased from absorbance of 0.247 to 0.711 at the wavelength of 400 nm, which was defined as the 1st phase. Subsequently the significant decolorization by the photo Fenton reaction occurred at the 2nd phase. Finally, complete decolorization (the color attributed to the color of Fe3+) could be achieved in 180 min at the 3rd phase. The instantaneous and considerable color increase at the 1st phase could be attributed to the formation of intermediate colored compounds like quinones and soluble iron complexes produced by the Fenton reaction. About 95% mineralization of model colored soft drink wastewater with 229 mg L(-1) initial TOC concentration was achieved after 165 min.     

Development of a pulse control-type MEMS microrobot with a hardware neural network

This article presents the micro-electro-mechanical systems (MEMS) microrobot which demonstrates locomotion controlled by hardware neural networks (HNN). The size of the microrobot fabricated by the MEMS technology is 4 × 4 × 3.5 mm. The frame of the robot is made of silicon wafer, and it is equipped with a rotary-type actuator, a link mechanism, and six legs. The rotary-type actuator generates rotational movement by applying an electrical current to artificial muscle wires. The locomotion of the microrobot is obtained by the rotation of the rotary-type actuator. As in a living organism, the HNN realized robot control without using any software programs, A/D converters, or additional driving circuits. A central pattern generator (CPG) model was implemented as an HNN system to emulate the locomotion pattern. The MEMS microrobot emulated the locomotion method and the neural networks of an insect with the rotary-type actuator, the link mechanism, and the HNN. The microrobot performed forward and backward locomotion, and also changed direction by inputting an external trigger pulse. The locomotion speed was 0.325 mm/s and the step width was 1.3 mm.     

Site-specific electronic structure analysis by channeling EELS and first-principles calculations

Site-specific electronic structures were investigated by electron energy loss spectroscopy (EELS) under electron channeling conditions. The Al-K and Mn-L(2,3) electron energy loss near-edge structure (ELNES) of, respectively, NiAl2O4 and Mn3O4 were measured. Deconvolution of the raw spectra with the instrumental resolution function restored the blunt and hidden fine features, which allowed us to interpret the experimental spectral features by comparing with theoretical spectra obtained by first-principles calculations. The present method successfully revealed the electronic structures specific to the differently coordinated cationic sites.     

A 950-MHz rectifier circuit for sensor network tags with 10-m distance

This paper presents a 950-MHz wireless power transmission system and a high-sensitivity rectifier circuit for ubiquitous sensor network tags. The wireless power transmission offers a battery-life-free sensor tag by recharging the output power of a base station into a secondary battery implemented with the tag. For realizing the system, a high-sensitivity rectifier with dynamic gate-drain biasing has been developed in a 0.3-/spl mu/m CMOS process. The measurement results show that the proposed rectifier can recharge a 1.2-V secondary battery over -14-dBm input RF power at a power conversion efficiency of 1.2%. In the proposed wireless system, this sensitivity corresponds to 10-m distance communication at 4-W output power from a base station.