Metal-Coated <100>-Cut GaAs Coupled to Tapered Parallel-Plate Waveguide for Cherenkov-Phase-Matched Terahertz Detection: Influence of Crystal Thickness

The influence of crystal thickness of metal-coated <100>-cut GaAs (M-G-M) on Cherenkov-phase-matched terahertz (THz) pulse detection was studied. The M-G-M detectors were utilized in conjunction with a metallic tapered parallel-plate waveguide (TPPWG). Polarization-sensitive measurements were carried out to exemplify the efficacy of GaAs in detecting transverse magnetic (TM)- and transverse electric (TE)-polarized THz waves. The reduction of GaAs’ thickness increased the THz amplitude spectra of the detected TM-polarized THz electro-optic (EO) signal due to enhanced electric field associated with a more tightly-focused and well-concentrated THz radiation on the thinner M-G-M. The higher-fluence THz beam coupled to the thinner M-G-M improved the integrated intensity of the detected THz amplitude spectrum. This trend was not observed for TE-polarized THz waves, wherein the integrated intensities were almost comparable. Nevertheless, good agreement of spectral line shapes of the superposed TM- and TE-polarized THz-EO signals with that of elliptically polarized THz-EO signal demonstrates excellent polarization-resolved detection capabilities of M-G-M via Cherenkov-phase-matched EO sampling technique.     

Super‐Absorbent Polymer Valves and Colorimetric Chemistries for Time‐Sequenced Discrete Sampling and Chloride Analysis of Sweat via Skin‐Mounted Soft Microfluidics

This paper introduces super absorbent polymer valves and colorimetric sensing reagents as enabling components of soft, skin‐mounted microfluidic devices designed to capture, store, and chemically analyze sweat released from eccrine glands. The valving technology enables robust means for guiding the flow of sweat from an inlet location into a collection of isolated reservoirs, in a well‐defined sequence. Analysis in these reservoirs involves a color responsive indicator of chloride concentration with a formulation tailored to offer stable operation with sensitivity optimized for the relevant physiological range. Evaluations on human subjects with comparisons against ex situ analysis illustrate the practical utility of these advances.     

Synthesis and Sintering of Cerium(II) Monosulfide

Cerium monosulfide (CeS) powder was synthesized by the reduction of Ce₂S₃ powder with metallic Ce, which was obtained from ceria (CeO₂) powder using carbon disulfide (CS₂) gas. To obtain the maximum amount of CeS from a mixture of Ce₂S₃ and Ce, an excess amount of metallic Ce, a stoichiometric composition, was necessary in the synthesis at 1273 K for 10.8 ks. The preliminary sintering experiments also were performed using a synthetic CeS powder containing a small amount of Ce, Ce₂O₂S, and β-Ce₂S₃ as impurities. It was found that the oxygen content in the sintered compact decreases gradually as the sintering temperature increases, because of the removal of the impurities due to the evaporation of the volatile CeO. Single-phase CeS was formed by sintering at 2173 K. To evaluate the activation energy for densification of single-phase CeS, a CeS powder was prepared by milling an initial sintered compact and was used as an ingredient for hot-press experiments. Densification data during hot-press sintering were analyzed using a kinetic equation, showing that boundary diffusion is a rate-limiting process. The results suggest that this boundary diffusion model can explain well the densification data, with an apparent activation energy of 479 kJ·mol^-1.     

Syntheses and properties of tetramethyl-p-silphenylenesiloxanealkenylmethyl-siloxane copolymers and their derivatives

$\text{Tetramethyl}\text{-p-}\text{silphenylenesiloxane}\text{alkenylmethylsiloxane}$ (TMPS/AMS) copolymers were snyhtesized from p-bis-dimethylhydroxysilylbenzene and a series of alkenylmethyldichlorosilanes as the starting materials. The alkenyl groups of the copolymers were vinyl, allyl, 2-(3-cyclohexenyl)ethyl, methacryloxypropyl and 3-bicycloheptenyl groups. The composition ranged from TMPS/AMS mole% ratio of $\text{92}\text{8}$ to $\text{83}\text{17}$ and the molecular weights were in the range 10⁴ to 10⁵. These copolymers were confirmed to have two compositions, one a certain length of TMPS segment and the other an AMS monomer unit, and that they could form films on the basis of the crystallization character of the TMPS segment. The melting temperatures of these copolymers decreased as the TMPS mole content decreased and as the alkenyl group contents were increased. The epoxidation reactions of these copolymers with m-chloroperbenzoic acid were carried out and the proportions of conversions of the alkenyl groups into epoxy groups varied depending upon the types of alkenyl groups involved. Cyclic olefin groups such as the 2-(3-cyclohexenyl)ethyl or the 3-bicycloheptenyl group were more easily epoxidized than the vinyl or allyl groups. The TMPS/dimethylsiloxane (DMS) graft copolymer could also be synthesized by the reaction of TMPS/vinylmethylsiloxane copolymer with dimethylhydrosilyl-terminated DMS oligomer in the presence of chloroplatinic acid acting as the catalyst.     

Fully automated two-dimensional electrophoresis system for high-throughput protein analysis

We developed a fully automated electrophoresis system for rapid and highly reproducible protein analysis. All the two-dimensional (2D) electrophoresis procedures including isoelectric focusing (IEF), on-part protein staining, sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), and in situ protein detection were automatically completed. The system comprised Peltiert devices, high-voltage generating devices, electrodes, and three disposable polymethylmethacrylate (PMMA) parts for IEF, reaction chambers, and SDS-PAGE. Because of miniaturization of the IEF part, rapid IEF was achieved in 30 min. A gel with a tapered edge gel on the SDS-PAGE part realized a connection between the parts without use of a gluing material. A biaxial conveyer was employed for the part relocation, sample introduction, and washing processes to realize a low-maintenance and cost-effective automation system. Performances of the system and a commercial minigel system were compared in terms of detected number, resolution, and reproducibility of the protein spots. The system achieved high-resolution comparable to the minigel system despite shorter focusing time and smaller part dimensions. The resulting reproducibility was better or comparable to the performance of the minigel system. Complete 2D separation was achieved within 1.5 h. The system is practical, portable, and has automation capabilities.     

Stimulation of osteoclast formation by 1,25-dihydroxyvitamin D requires its binding to vitamin D receptor (VDR) in osteoblastic cells: studies using VDR knockout mice

Previous studies have shown that 1,25-dihydroxyvitamin D [1,25(OH)2D] plays important roles in the formation of osteoclasts through its actions on osteoblastic cells. We have generated mice lacking vitamin D receptor (VDR) by gene targeting (VDR-/-). These mice had tartrate-resistant acid phosphatase (TRAP)-positive osteoclasts, and exhibited similar levels of parameters for bone resorption to those in wild type mice. The present studies were undertaken to clarify whether effects of 1,25(OH)2D on osteoclast formation require VDR in osteoblasts, and to examine mechanisms of the formation of osteoclasts without VDR-mediated actions using VDR-/- mice. When wild-type calvarial osteoblasts and spleen cells were co-cultured with 1,25(OH)2D, TRAP-positive osteoclasts were formed regardless of the genotypes of spleen cells. In contrast, when osteoblasts from VDR-/- mice were co-cultured, no osteoclasts could be formed even with wild-type spleen cells. Parathyroid hormone and interleukin-1alpha stimulated osteoclast formation by co-cultures from VDR-/- mice, and the generated osteoclasts showed resorbing activity. These results demonstrate that VDR-mediated actions of 1,25(OH)2D in osteoblasts are essential for osteoclast formation by 1,25(OH)2D, and that functionally intact osteoclasts can be formed without 1,25(OH)2D actions under stimulations by other agents. It is suggested that osteoclastic bone resorption can be maintained without 1,25(OH)2D actions by other stimulatory agents.     

Configurational Observation of Titanium Oxide Pigment Particles

The physical and chemical configuration of anatase-form titanium dioxide pigment particles was investigated with a field-emission gun using transmission electron microscopy and energy-dispersive spectroscopy (EDX). The particle was ∼0.2 µm in average size and had an amorphous-surface-layer thickness of 1-2 nm around the single-crystallized matrix. Niobium that had segregated in the amorphous surface layer was detected via EDX analysis.     

Corrosion inhibition of mild steel by schiff base compounds in various aqueous solutions: part 1

The corrosion inhibition by Schiff base compounds derived from diamines and o-hydroxy, o-methoxy aromatic aldehydes was investigated by weight loss, electrochemical measurements and surface analysis of SS 400 in various aqueous solutions such as tap water (LC), concentrated tap water (HC) and HCl solutions. The maximum inhibition efficiency (η) of N,N′-bis (salicylaldehyde)-1,12-diaminododecane (Saldn) for SS 400 in HCl solution approached 93%. The adsorption of Saldn on mild steel in HCl solution was obeyed Langmuirs isotherm.     

Efficient Path Selection for Delay Testing Based on Path Clustering

In this paper, we introduce a way of modeling the differences between the calculated delays and the real delays, and propose an efficient path selection method for path delay testing based on the model. Path selection is done by judging which of two paths has the larger real delay by taking into account the ambiguity of calculated delay, caused by imprecise delay modeling as well as process disturbances. In order to make precise judgment under this ambiguity, the delays of only the unshared segments of the two paths are evaluated. This is because the shared segments are presumed to have the same real delays on both paths.The experiments used the delays of gates and interconnects, which were calculated from the layout data of ISCAS85 benchmark circuits using a real cell library. Experimental results show the method selects only about one percent of the paths selected by the most popular method.