Microstructure Study at Different Thicknesses of Disc-Shaped YBa2Cu3O7?x Prepared by FQMG Method

The flame-quench-melt-growth (FQMG) method was used for the preparation of bulk YBa₂Cu₃O_7?x (Y123). Both the superconducting and nonsuperconducting regions changing with thickness of superconducting sample were determined by X-ray diffraction (XRD) patterns and also observed at micrographs taken by the polarized optical microscope. It was observed that superconducting forming ratio which was examined for different thicknesses of the sample ranging from 6.54 to 1.58 mm strongly enhanced. This means that a region near the top surface of the sample contains more superconducting phase than the other regions. These observations would be helpful in designing and manufacturing the practical applications of YBCO systems.     

Extended sliding frame R-Aloha: Medium access control (MAC) protocol for mobile networks

Proliferation of mobile communication devices necessitates a reliable and efficient medium access control (MAC) protocol. In this paper, A MAC protocol, called extended sliding frame reservation Aloha (ESFRA), based on sliding frame R-Aloha (SFRA) is proposed for network access technique. ESFRA is particularly designed to solve the mobile hidden station (MHS) problem in a mobile ad hoc network (MANET) by including relative locations of transmitting stations in the packet frame information header. The MHS problem is unique in mobile networks and occurs if a mobile station enters in a collision free zone of any ongoing communication and disturbs this communication with its transmission. In addition to the MHS problem, ESFRA simultaneously solves hidden station, exposed station, and neighborhood capture problems typically observed in wireless networks. A Markov model of ESFRA is developed and provided here to estimate throughput, delay and collision probabilities of the proposed protocol. The Markov modeling is extended to the analysis of SFRA and IEEE 802.11 to compare these competing MAC protocols with ESFRA. The analysis shows that ESFRA decreases frame transmission delay, increases throughput, and reduces collision probabilities compared to IEEE 802.11 and SFRA. ESFRA improves the network throughput 28 percent compared to that of IEEE 802.11, and 33 percent compared to that of SFRA. The improved performance is obtained at the expense of the synchronization compared to IEEE 802.11, but there is virtually no extra cost compared to SFRA.     

Strong Damping‐Like Spin‐Orbit Torque and Tunable Dzyaloshinskii–Moriya Interaction Generated by Low‐Resistivity Pd1−xPtx Alloys

Despite their great promise for providing a pathway for very efficient and fast manipulation of magnetization, spin‐orbit torque (SOT) operations are currently energy inefficient due to a low damping‐like SOT efficiency per unit current bias, and/or the very high resistivity of the spin Hall materials. This work reports an advantageous spin Hall material, Pd_1?xPt_x, which combines a low resistivity with a giant spin Hall effect as evidenced with three independent SOT ferromagnetic detectors. The optimal Pd_0.25Pt_0.75 alloy has a giant internal spin Hall ratio of >0.60 (damping‐like SOT efficiency of ≈0.26 for all three ferromagnets) and a low resistivity of ≈57.5 µΩ cm at a 4 nm thickness. Moreover, it is found that the Dzyaloshinskii–Moriya interaction (DMI), the key ingredient for the manipulation of chiral spin arrangements (e.g., magnetic skyrmions and chiral domain walls), is considerably strong at the Pd_1?xPt_x/Fe_0.6Co_0.2B_0.2 interface when compared to that at Ta/Fe_0.6Co_0.2B_0.2 or W/Fe_0.6Co_0.2B_0.2 interfaces and can be tuned by a factor of 5 through control of the interfacial spin‐orbital coupling via the heavy metal composition. This work establishes a very effective spin current generator that combines a notably high energy efficiency with a very strong and tunable DMI for advanced chiral spintronics and spin torque applications.     

Power Reflection and Transmission Coefficients for Meander‐Line Polarizers with a Chiral Slab

This paper presents a theoretical investigation of power reflection and transmission coefficients for a meander‐line polarizer placed periodically on a chiral slab. It is assumed that a linearly polarized transverse magnetic wave is incident on a chiral slab from the air region. In the analysis, we derive the electric and magnetic fields in the modal form in the air and chiral regions. We obtain power reflection and transmission coefficients in a straightforward manner after matching the tangential components of the electric and magnetic fields at the boundaries. We present numerical results for the power reflection and transmission coefficients versus frequency and incident angle for different values of the chirality admittance. A meander‐line polarizer placed on a dielectric slab can convert a linearly polarized wave to a circularly polarized wave. The design parameters for a meander‐line polarizer are the dimensions of the meander‐line and the values of the dielectric slab. Replacing a dielectric slab with a chiral slab introduces a new independent parameter which controls the wave polarization.     

Performance enhancement of the DSRC system using frequency-domain equalization for 5.9 GHz DSRC applications

This paper proposes the use of equalization concepts in frequency domain that exploit the frequency domain channel matrix to combat inter-carrier interference (ICI) instead of inter-symbol interference (ISI) in 5.9 GHz Dedicated Short Range Communications (DSRC) systems. The physical layer (PHY) of DSRC is currently being developed by work group of IEEE 802.11p. The conventional system currently assumes static channel characteristics. Channel tracking schemes were investigated and the Viterbi-aided channel estimation scheme was proposed for DSRC systems that did not explicitly exploit the ICI components caused by the time-varying channels. The performance of the DSRC system is investigated for a time-varying channel using a conventional DSRC model, a decision-directed (Viterbi-aided) channel estimation model, and the frequency-domain equalization design. It is shown that the DSRC system with the frequency-domain equalization achieves a considerable performance enhancement compared to both the conventional and the Viterbi-aided channel estimation schemes in terms of both packet error rate (PER) and bit error rate (BER) at relatively high and low velocities.     

Detecting and connecting disjoint sub-networks in wireless sensor and actor networks

Wireless sensor and actor networks (WSANs) can be considered as a combination of a sensor network and an actor network in which powerful and mobile actor nodes can perform application specific actions based on the received data from the sensors. As most of these actions are performed collaboratively among the actors, inter-actor connectivity is one of the desirable features of WSANs. In this paper, we propose a novel distributed algorithm for establishing a connected inter-actor network topology. Considering initially disjoint sets of actors, our algorithm first initiates a search process by using the underlying sensor network in order to detect the possible sub-networks of actors in the region. After these sub-networks are detected, our algorithm pursues a coordinated actor movement in order to connect the sub-networks and thus achieve inter-actor connectivity for all the actors. This coordinated movement approach exploits the minimum connected dominating set of each sub-network when picking the appropriate actor to move so that the connectivity of each sub-network is not violated. In addition, the approach strives to minimize the total travel distance of actors and the messaging cost on both sensors and actors in order to extend the lifetime of WSAN. We analytically study the performance of our algorithm. Extensive simulation experiments validate the analytical results and confirm the effectiveness of our approach.     

The future of security in Wireless Multimedia Sensor Networks

This is a position paper on our views on security aspects of Wireless Multimedia Sensor Networks (Secure WMSNs). It is meant to serve as a brief survey. But, more importantly, it gives a perspective on how we foresee the future of this research area, its main challenges, and its future trends. We believe that this paper will spur new discussions and research ideas among the researchers from both the industry and the academic world.     

Ring Opening of Epoxidized Soybean Oil with Compounds Containing Two Different Functional Groups

Epoxidized vegetable oils are desirable chemicals due to their eco‐friendly characteristics and their being a major source of many green products. Ring opening is one of the ways to convert these epoxidized oils to some new intermediates. The use of mono‐functional amines, alcohols, acid anhydrides and thioethers for epoxy ring opening has been reported in the literature. In this study, thioglycolic acid (TGA) bearing thiol and carboxylic acid as two different functional groups and methyl ester of thioglycolic acid (TGAME) were used. Currently, there is no reported literature describing epoxy ring opening using chemicals bearing two different functional groups simultaneously. In this way, two new polyols were synthesized, one with TGA (polyol 1) and one with TGAME (polyol 2). FTIR and ¹H‐ and ¹³C‐NMR spectroscopy confirmed that the ring was opened by the carboxylic acid group of TGA, and the thiol group was not involved in the ring opening whereas the ring was opened by the thiol group in the case of TGAME.