The European,Japanese and US protective helmet,gloves and boots for firefighters: thermoregulatory and psychological evaluations

The purpose of this study was to investigate the physiological and subjective responses of the European, Japanese (JPN) and US firefighters' helmet, gloves and boots for international standardisation. Three experimental conditions were evaluated (clothing mass: 9.4, 8.2 and 10.1 kg for the three conditions, respectively) at the air temperature of 32°C and 60% relative humidity. The results showed that there was no significant difference among the three conditions in oxygen consumption, heart rate, total sweat rate, rectal temperature and mean skin temperature, whereas peripheral temperatures and subjective perceptions were lower in the JPN condition than in the other conditions (P < 0.05). These results indicate that a 0.5-kg reduction in helmet mass and a 1.1-kg reduction in boot mass during exercise resulted in a significant decrease in head and leg temperatures and subjective perceptions, while a 1.9-kg reduction in total clothing mass had insignificant influences on the metabolic burden and overall body temperature.     

Unified reliability estimation and management of NoC based chip multiprocessors

We present a new architecture level unified reliability evaluation methodology for chip multiprocessors (CMPs). The proposed reliability estimation (REST) is based on a Monte Carlo algorithm. What distinguishes REST from the previous work is that both the computational and communication components are considered in a unified manner to compute the reliability of the CMP. We utilize REST tool to develop a new dynamic reliability management (DRM) scheme to address time-dependent dielectric breakdown and negative-bias temperature instability aging mechanisms in network-on-chip (NoC) based CMPs. Designed as a control loop, the proposed DRM scheme uses an effective neural network based reliability estimation module. The neural-network predictor is trained using the REST tool. We investigate how system’s lifetime changes when the NoC as the communication unit of the CMP is considered or not during the reliability evaluation process and find that differences can be as high as 60%. Full-system based simulations using a customized GEM5 simulator show that reliability can be improved by up to 52% using the proposed DRM scheme in a best-effort scenario with 2–9% performance penalty (using a user set target lifetime of 7 years) over the case when no DRM is employed.     

Low-Temperature Synthesis of ZrC Powder by Cyclic Reaction of Mg in ZrO2–Mg–CH4

We investigated the conditions for low-temperature synthesis of ZrC fine powder from ZrO₂–Mg–CH₄. The synthesis utilizes a thermite-type reaction, with Mg as the reducing agent, and a reaction between Mg and CH₄ gas as a carbon source. The Mg/ZrO₂ molar ratio as well as the heating rate were varied. Because C can be continuously fed into the reaction group by the cyclic reaction of Mg through the formation and decomposition of Mg₂C₃ (2Mg + 3CH₄→ Mg₂C₃+ 6H₂→ 2Mg + 3C), a molar ratio of 2.2 for Mg/ZrO₂ was sufficient for the synthesis of single-phase ZrC. ZrC powders were synthesized under the following conditions: Mg/ZrO₂ molar ratio = 2.2, heating rate = 20°C/min, and temperature maintained at 750°C for 30 min. The amount of reaction heat produced in the reduction reaction of ZrO₂ by Mg depended on the Mg/ZrO₂ molar ratio, specifically, the amount of ZrO₂ contained. Moreover, the cyclic reaction of Mg-Mg₂C₃–Mg was influenced by the amount of reaction heat described above and by the heating rate. The ZrC fine powder showed little aggregation and high dispersibility.     

Fractionation and enrichment of CLA isomers by selective esterification with Candida rugosa lipase

A commercial product of CLA contains almost equal amounts of cis-9,trans-11 (c9,t11)-CLA and trans-10,cis-12 (t10,c12)-CLA. We attempted to enrich the two isomers by a two-step selective esterification using Candida rugosa lipase that acted on c9,t11-CLA more strongly than on t10,c12-CLA. An FFA mixture containing CLA isomers was esterified with an equimolar amount of lauryl alcohol in a mixture of 20% water and the lipase. When the esterification of total FA reached 50%, two isomers were fractionated in a good yield: t10,c12-CLA was enriched in FFA, and c9,t11-CLA was recovered in lauryl esters. The FFA were esterified again to enrich t10,c12-CLA. At 27.3% esterification of total FA, the t10,c12-CLA content in FFA increased to 64.8 wt% with 89.3% recovery: The ratio of the content of t10,c12-CLA to that of two isomers was 95.9%. Lauryl esters obtained by the single esterification were employed for enrichment of c9,t11-CLA. After the esters were hydrolyzed, the resulting FFA were esterified again with lauryl alcohol. At 62.0% esterification of total FA, the c9,t11-CLA content in lauryl esters increased to 73.3 wt% with 79.4% recovery: The ratio of the content of c9,t11-CLA to that of two isomers was 95.6%. In a 600-g-scale purification, molecular distillation was effective in separating the reaction mixture into lauryl alcohol, FFA, and lauryl ester fractions.     

Preparation of π-conjugated polymers consisting of 2-decylbenzimidazole and thiophene units and chemical properties of the polymers

Polycondensation by Stille coupling of 2-decyl-4,7-dibromobenzimidazoles and N-methyl-2-decyl-4,7-dibromobenzimidazole with 2,5-bis(trimethylstannyl)thiophene and 5,5′-bis(trimethylstannyl)-2,2′-bithiophene gave the corresponding π-conjugated polymers, poly(2-decylbenzimidazole-4,7-diyl-thiophene-2,5-diyl) 1b, poly(2-decylbenzimidazole-4,7-diyl-bithiophene-2,5-diyl) 1c and poly(N-methyl-2-decylbenzimidazole-4,7-diyl-thiophene-2,5-diyl) 2b, in 98-99% yields. The polymers 1b and 2b were fully soluble in CF₃COOH, and partially soluble in DMF (about 60 and 40% for 1b and 2b, respectively) and NMP (about 70 and 40%, respectively). The NMP soluble part of 1b and DMF soluble part of 2b gave values of 0.36 and 0.24 dl g⁻¹ in NMP and DMF, respectively. The DMF soluble part of 1b, 1c and 2b showed absorption peaks at about 458, 465 and 388 nm, respectively, in DMF. In an alkaline medium the absorption peaks of 1b and 1c are shifted to a longer wavelength by 92-101 nm; the observed shifts in the acidic medium and alkaline medium were much larger than those observed with usual benzimidazoles with low molecular weights. Packing structures of 1b, 1c and 2b are discussed based on their XRD patterns.     

Effect of vanadium and chromium on the microstructural features of V–Cr–Mn–Ni spheroidal carbide cast irons

The objective of this investigation is to study the influence of vanadium（5.0wt%–10.0wt%） and chromium（0–9.0wt%） on the microstructure and hardness of Cr-V-Mn-Ni white cast irons with spheroidal vanadium carbides. The alloys＇ microstructural features are presented and discussed with regard to the distribution of phase elements. The structural constituents of the alloys are spheroidal VC, proeutectoid cementite, ledeburite eutectic, rosette-shaped carbide eutectic（based on M7C3）, pearlite, martensite, and austenite. Their combinations and area fraction（AF） ratios are reported to be influenced by the alloys＇ chemical composition. Spheroidized VC particles are found to be sites for the nucleation of carbide eutectics. Cr and V are shown to substitute each other in the VC and M7C3 carbides, respectively. Chromium alloying leads to the formation of a eutectic（γ-Fe ＋ М7С3）, preventing the appearance of proeutectoid cementite in the structure. Vanadium and chromium are revealed to increase the total carbide fraction and the amount of austenite in the matrix. Cr is observed to play a key role in controlling the metallic matrix microstructure.     

Spatial distribution of silica fillers in phase-separated rubber blends investigated by three-dimensional elemental mapping

The distribution of nano-sized silica in binary rubber blends is characterized by scanning transmission electron microscopy (STEM) tomography combined with energy dispersive X-ray spectrometry (EDX). 3D distribution of silica is visualized by STEM-EDX tomography with the tilt-series of silicon elemental maps, while the phase-separated morphologies of polyisoprene rubber (IR) and styrene-butadiene rubber (SBR) are visualized by STEM-tomography in high-angle-annular-dark field (HAADF) mode. The combination of STEM-EDX and STEM-HAADF tomography enables us to determine the distribution of silica between the two rubber phases quantitatively even with high contents of silica up to 70 phr (weight parts per hundred rubber). It is found that silica is preferentially distributed in the SBR phase, but it is also distributed in the IR phase when the IR fraction in the total rubber components is higher than 40 wt%. The preferential distribution of silica in the SBR phase improves the dispersion of the IR domains. This is the first use of this technique for a multicomponent polymer system, showing the advantage to characterize the complicated multicomponent polymer composite morphologies.     

Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.     

Reversible computing and cellular automata—A survey

Reversible computing is a paradigm where computing models are defined so that they reflect physical reversibility, one of the fundamental microscopic physical property of Nature. In this survey/tutorial paper, we discuss how computation can be carried out in a reversible system, how a universal reversible computer can be constructed by reversible logic elements, and how such logic elements are related to reversible physical phenomena. We shall see that, in reversible systems, computation can often be carried out in a very different manner from conventional (i.e., irreversible) computing systems, and even very simple reversible systems or logic elements have computation- or logical-universality. We discuss these problems based on reversible logic elements/circuits, reversible Turing machines, reversible cellular automata, and some other related models of reversible computing.