Antireflection subwavelength structure of silicon surface formed by wet process using catalysis of single nano-sized gold particle

Subwavelength structure (SWS) was formed by simple wet chemical etching using catalysis of gold (Au) nanoparticle. Single nano-sized Au particle dispersion solution was coated onto silicon (Si)(1 1 1) substrate with polished surface. Then, the samples were soaked in an aqueous etching solution of hydrofluoric acid and hydrogen peroxide. The surface of 15-min-etched Si substrate appeared black. The reflectivity of the Si substrate was reduced to below 5% throughout the entire spectrum from 300 to 800 nm owing to SWS. The fractional area occupied by Si as a function of the depth across the textured layer showed a smooth increase of density up to a depth. The observed optical effects were explained by the formation of a subwavelength scale taper structure, representing an effective medium with a smooth transition of the refractive index from air to Si.     

Gigacycle fatigue data sheets for advanced engineering materials

Gigacycle fatigue data sheets have been published since 1997 by the National Institute for Materials Science. They cover several areas such as high-cycle-number fatigue for high-strength steels and titanium alloys, the fatigue of welded joints, and high-temperature fatigue for advanced ferritic heat-resistant steels. Some unique testing machines are used to run the tests up to an extremely high number of cycles such as 10¹⁰ cycles. A characteristic of gigacycle fatigue failure is that it is initiated inside smooth specimens; the fatigue strength decreases with increasing cycle number and the fatigue limit disappears, although ordinary fatigue failure initiates from the surface of a smooth specimen and a fatigue limit appears. For welded joints, fatigue failure initiates from the notch root of the weld, because a large amount of stress is concentrated at the weld toe. The fatigue strength of welded joints has been obtained for up to 10⁸ cycles, which is an extremely high number of cycles for large welded joints. The project of producing gigacycle fatigue data sheets is still continuing and will take a few more years to complete.     

SPR sensor chip for detection of small molecules using molecularly imprinted polymer with embedded gold nanoparticles

Molecularly imprinted polymer gel with embedded gold nanoparticle was prepared on a gold substrate of a chip for a surface plasmon resonance (SPR) sensor for fabricating an SPR sensor sensitive to a low molecular weight analyte. The sensing is based on swelling of the imprinted polymer gel that is triggered by an analyte binding event within the polymer gel. The swelling causes greater distance between the gold nanoparticles and substrate, shifting a dip of an SPR curve to a higher SPR angle. The polymer synthesis was conducted by radical polymerization of a mixture of acrylic acid, N-isopropylacrylamide, N,N'-methylenebisacrylamide, and gold nanoparticles in the presence of dopamine as model template species on a sensor chip coated with allyl mercaptan. The modified sensor chip showed an increasing SPR angle in response to dopamine concentration, which agrees with the expected sensing mechanism. Furthermore, the gold nanoparticles were shown to be effective for enhancing the signal intensity (the change of SPR angle) by comparison with a sensor chip immobilizing no gold nanoparticles. The analyte binding process and the consequent swelling appeared to be reversible, allowing one the repeated use of the presented sensor chip.     

Evaluation of InGaP/InGaAs/Ge triple-junction solar cell and optimization of solar cell's structure focusing on series resistance for high-efficiency concentrator photovoltaic systems

The series resistance of an InGaP/InGaAs/Ge triple-junction solar cell was evaluated in detail. Series resistance components such as electrode resistance, tunnel junction resistance and lateral resistance between electrodes were estimated separately. The characteristics of the triple-junction solar cell under concentrated light were evaluated by equivalent circuit calculation with a simulation program with integrated circuit emphasis (SPICE). By equivalent circuit calculation, the optimization of cell designs was performed, focusing on series resistance and cell current in order to realize high-efficiency concentrator cells.     

Performance of an MEG adaptive-beamformer source reconstruction technique in the presence of additive low-rank interference

The influence of external interference on neuromagnetic source reconstruction by adaptive beamformer techniques was investigated. In our analysis, we assume that the interference has the following two properties: First, it is additive and uncorrelated with brain activity. Second, its temporal behavior can be characterized by a few distinct activities, and as a result, the spatio-temporal matrix of the interference has a few distinctly large singular values. Namely, the interference can be modeled as a low-rank signal. Under these assumptions, our analysis shows that the adaptive beamformer techniques are insensitive to interference when its spatial singular vectors are so different from a lead field vector of a brain source that the generalized cosine between these two vectors is much smaller than unity. Four types of numerical examples verifying this conclusion are presented.     

Estimation of flooding in PEMFC gas diffusion layer by differential pressure measurement

The flooding, especially in gas diffusion layer (GDL), is one of the critical issues to put PEMFC to practical use. However, the experimental data of the flooding in GDL is so insufficient that the optimization design related to the water management for GDL has not established. In this study we developed a method to estimate the water saturation, namely the ratio of liquid water to pore volume in GDL. We fabricated a simple interdigitated cell where the supply gas is enforced to flow under rib. This structure enables to estimate the liquid water ratio in GDL by the measurement of differential pressure through the cell. We operated the cell and measured the differential pressure, and succeeded in estimating the water saturation, which changed largely with changing cell operation condition. In addition to this deferential pressure measurement, we measured the ionic resistance in polymer electrolyte membrane by ac impedance method. We evaluated and discussed the influence of the water saturation on cell voltage.     

Photochromic organic-inorganic polymer hybrids from spiropyran-modified poly(N,N-dimethylacrylamide)

Summary Photochromic organic-inorganic polymer hybrids were prepared by the sol-gel reaction of tetramethoxysilane (TMOS) in the presence of spiropyran-modified poly(N,N-dimethylacrylamide) 3. The obtained polymer hybrids were characterized by thermogravimetric analysis (TGA) and FT-IR, and photochromic behavior was followed by electronic absorption spectroscopy. Upon an irradiation of ultraviolet light, an absorption around 557 nm appeared in the visible region and the color of the hybrid turned to be violet. The effect of silica gel on the isomerization behavior seemed to be relatively small. Received: 8 November 1999/Revised version: 13 December 1999/Accepted: 15 December 1999     

Electrical Properties of (110)-Oriented Nondoped Mg2Si Films with p-Type Conduction Prepared by RF Magnetron Sputtering Method

Magnesium silicide (Mg₂Si) thick films with (110) orientation were fabricated on (001) sapphire substrate using radiofrequency magnetron sputtering. Stoichiometric Mg₂Si films with composition Si/(Mg + Si) = 0.33 were achieved over a range of vacuum from 10 mTorr to 140 mTorr and 300°C. On postannealing the film at 500°C, the out-of-plane lattice parameter shifted to lower values and the electrical conductivity increased by two orders of magnitude. A room-temperature Seebeck coefficient of 517 μV K^?1 was observed and found to decrease with increasing temperature; the Seebeck coefficient remained at a constant positive value of 212 μV K^?1 at 500°C. This can be related to the possibility of p-type conduction in this temperature range.