Main‐chain smectic liquid crystalline polymer exhibiting unusually high thermal conductivity in an isotropic composite

The thermal conductivity (TC) of an isotropic composite comprising of a main‐chain smectic liquid crystalline PB‐10 polyester and 50‐μm‐sized roughly spherical magnesium oxide (MgO) particles is investigated. The increase in the composite TC with higher MgO fractions is steeper than that expected by Bruggeman's theory for the TC of a polydomain PB‐10 polyester (0.52 W m^?1 K^?1). When the filler content is larger than 30 vol %, the composite TC approaches a value that can be explained only if the polyester functions as a matrix with 1.0 W m^?1 K^?1, which is five times as high as those of isotropic common polymers (0.2 W m^?1 K^?1). Such an unusually high TC for a polymer matrix is attributed to some polymer lamellae that lie parallel to the particle surface and are stacked toward neighboring particles, thus creating effective heat paths between the particles and a continuous thermal network in a composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39896.     

Effects of Water and Gelatinized Starch on the Viscoelasticity of Pizza Dough and the Texture of Pizza Crust

The soft texture of the pizza crust rim is generated by baking at a high temperature for a short period in a stone oven. In the case of baking in an electric oven, the pizza dough is baked at a much lower temperature and for a longer period, resulting in a harder texture. To improve the texture of electric oven-baked pizza crust, the effects of water and gelatinized starch on the viscoelasticity of pizza dough and the texture of pizza crust were investigated. Rheological properties (storage modulus, loss modulus, and yield stress) of pizza dough decreased with an increase in water content. When wheat flour in the dough was partially replaced with pre-gelatinized wheat starch, the rheological properties of the dough were maintained even at a high-water content. These results indicate that water-enriched dough can be prepared with gelatinized starch and baked using an electric oven. There was no significant difference in apparent density between the conventional and modified pizza crusts. Water content of the crumb part of the modified crust was significantly higher than that of the conventional crust. Texture analysis revealed that the modified pizza crust showed significantly lower stress at high strain than the conventional crust. In addition, sensory evaluation showed that the modified pizza crust exhibited greater firmness and stickiness than the conventional crust, which was attributed to the increased water content with gelatinized starch of the dough.     

Neutron beam design for both medical neutron capture therapy and industrial neutron radiography for TRIGA reactor

Neutron beam designs were studied for TRIGA reactor with a view to generating thermal, epithermal and fast neutron beams for both medical neutron capture therapy (NCT) and industrial neutron radiography (NR). The beams are delivered from thermal and thermalizing columns, and also horizontal beam hole. Several prospective neutron filters (high-density graphite (G), bismuth (Bi), single-crystal silicon (Si), aluminum (Al), aluminum oxide (Al₂O₃), aluminum fluoride (AlF₃) and lead fluoride (PbF₂)) were examined for obtaining sufficiently intense neutron beam for various applications. Monte Carlo calculations indicated that with a suitable neutron filter arrangement, thermal and epithermal neutron beams attaining 2×10⁹ and 7×10⁸ n cm⁻²S⁻¹, respectively, could be obtainable from thermal and thermalizing columns with the reactor operating at 100 kW. These neutron beams could be adopted for boron neutron capture therapy. Compared with these columns, horizontal beam port would deliver neutron fluxes of 10⁻² 10⁻³ lower intensity, but produced thermal and neutron beams would be adequate for different application of nondestructive inspection by neutron radiography.     

Burning Rate Augmentation of BAMO Based Propellants

Thermal decomposition and the burning properties of BAMO based propellants with HMX or AN/HMX have been investigated. The heat generated by the azide binder decomposition initiated and accelerated the thermal decomposition of HMX and AN. Ammonium perchlorate (AP) and lead stearate with carbon black significantly altered the mechanisms of the thermal decomposition and the burning properties of the HMX based propellants. AP showed an increase in burning rate with a slight decrease in burning rate pressure exponent. The lead catalyst yielded high value of the burning rate with the lowest pressure exponent. The ammonium dichromate also influenced the mechanisms of the thermal decomposition and the burning properties of the AN/HMX samples. The combination of ammonium dichromate and copper chromite was the most effective on the burning rate augmentation of AN/HMX based propellants. AN sublimed and evaporated from the condensed phase and mainly reacted exothermically in the gas phase HMX and AN/HMX based propellants showed smokeless burning characteristics in the small rocket motor combustion tests.     

Synthesis and chemical properties of polyethyleneimines crosslinked by penta-2,4-dienylideneammonium unit

The reaction of N-(2,4-dinitrophenyl)pyridinium anion ( salt(A) ; A = Cl⁻, FeCl₄⁻, and (CN)₂N⁻) with linear polyethyleneimine (LPEI; M_n = 20 380) and branched polyethyleneimines (BPEI1; M_n = 600, BPEI2; M_n = 10 000) at various molar feed ratios without using a catalyst resulted in pyridinium ring opening to yield ionic LPEI and BPEIs that were crosslinked by conjugated penta-2,4-dienylideneammonium (PDA) units, LPEI-PDA , BPEI1-PDA , and BPEI2-PDA , respectively. A model compound was synthesized by the reaction of salt(Cl) with diethylamine. The solubilities of BPEI1-PDA and BPEI2-PDA depended on the feed ratios between salt(Cl) and BPEI1 or BPEI2. Dipping LPEI-PDA into water and methanol yielded hydro- and organogels, respectively. UV–vis and reflection measurements revealed an expanded π-conjugation length between the polymer chains due to the through-space orbital interaction of the electrons on the two nitrogen atoms at the crosslinked positions in LPEI-PDA , BPEI1-PDA , and BPEI2-PDA . Cyclic voltammetry analysis suggested that the polymers underwent electrochemical oxidation. Measurement using a superconducting quantum interference device (SQUID) indicated that LPEI-PDA having FeCl₄⁻ anions was paramagnetic. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48712.     

Visible-light-active titanium oxide photocatalyst realized by an oxygen-deficient structure and by nitrogen doping

A visible-light (vis)-active titanium oxide photocatalyst was prepared by a simple wet process: the calcination of the hydrolysis product of Ti(SO₄)₂ with ammonia using an ordinary electric furnace in dry air at 400 °C. The color of this photocatalyst was vivid yellow and absorbed light in the blue (400 nm) to bluish-green (550 nm) region exclusively. Its structure was characterized to anatase with oxygen-deficient stoichiometry by XRD and X-ray photoelectron spectroscopy. Nitrogen was also detected, but only in trace amounts. Using blue-light-emitting diodes as a light source, 540 ppm of acetone was decomposed within 36 h and a stoichiometric yield of CO₂ was obtained. From the results of the crystalline size D, it was found that vis-activity could be realized on polycrystalline particles and the grain-boundaries (GBs) are thought to be important, since oxygen vacancies are easily created in GBs, which could form a GB state. Finally, we concluded that oxygen-deficient sites formed in GBs are important to emerge vis-activity, and nitrogen doped in the part of oxygen-deficient sites are important as a blocker for reoxidation.     

Sterol composition of 19 vegetable oils

The unsaponifiables from 19 vegetable oils were divided into a sterol and three other fractions by thin-layer chromatography. All except olive and palm kernel oils gave the sterol fraction in a large quantity. Compositions of the sterol fractions were determined by gas liquid chromatography. Identification of each sterol was carried out by gas liquid chromatography and combined gas chromatograph-mass spectrometry. Campesterol, stigmasterol and β-sitosterol were present in all oils, and a minor amount of cholesterol in majority of the oils. Brassicasterol occurrence was widespread but its content was extremely small in oils other than rapeseed oil. Other sterols, presumably δ⁷-stigmastenol and δ⁵- and δ⁷-avenasterol were detected in most of the oils.     

Sterols,methylsterols, and triterpene alcohols in threeTheaceae and some other vegetable oils

The unsaponifiables from threeTheaceae (Camellia japonica L.,Camellia Sasanqua Thunb., andThea sinensis L.) oils and alfalfa, garden balsam, and spinach seed oils and shea fat were separated into four fractions: sterols, 4-methylsterols, triterpene alcohols, and less polar compounds by thin layer chromatography. While the sterol fraction was the major one for the unsaponifiables from alfalfa and spinach seed oils, the triterpene alcohol fraction was predominant for the unsaponifiables from all other oils. The sterol, 4-methylsterol, and triterpene alcohol fractions were analyzed by gas chromatography. All the sterol fractions were alike in their compositions, consisting exclusively of Δ⁷-sterols, such as α-spinasterol and Δ⁷-stigmastenol as predominant components together with Δ⁷-avenasterol and 24-methylcholest-7-enol. Obtusifoliol, gramisterol (occasionally accompanied with cycloeucalenol), and citrostadienol, together with several other unidentified components, were found in the 4-methylsterol fractions from all of the oils except shea fat. The 4-methylsterol fraction from shea fat showed a characteristic composition containing a large proportion of unidentified components which had relative retention time greater than that of citrostadienol, while no citrostadienol was detected. β-Amyrin, lupeol, and butyospermol were major components of the triterpene alcohol fractions from most of the oils, but the fraction from spinach seed oil contained cycloartenol and 24-methylene-cycloartanol as predominant components. There is a close similarity in the compositions of unsaponifiables (sterols, 4-methylsterols, and triterpene alcohols) of the threeTheaceae oils. Two sterols, α-spinasterol and Δ⁷-stigmastenol, and five triterpene alcohols were isolated from tea seed oil. Moreover, five unidentified components beside parkeol, butyrospermol, α-amyrin, and lupeol were isolated from the triterpene alcohol fraction of shea fat.     

Experimental investigation of melt pool behaviour during selective laser melting by high speed imaging

Melt pool behaviour and the characteristics of the surrounding metal powder during selective laser melting (SLM) are captured using high-speed imaging, and the influence of the substrate temperature and the line building sequence on the formation of the built structure and the generation of spatter particles is experimentally investigated. The results indicate that the substrate temperature has a measurable effect on the formation of droplets and the generation of spatter particles, while the volume specific energy density of the process was the principal factor affecting the built structure.     

Analysis and optimization of high-power pulse transformer for SXFEL

Longitudinal injection is a promising on-axis injection scheme for diffraction-limited storage rings. In the latest version of the Hefei advanced light source(HALS), both the dynamic aperture and momentum aperture have been optimized. A longitudinal injection scheme was investigated on the HALS using a doublefrequency radio frequency system. To evaluate the injection performance, various errors were considered. A series of tracking simulations were conducted, and the injection efficiency was obtained under different error levels.