Methacrylate-based ionic liquid: radical polymerization/copolymerization with methyl methacrylate and evaluation of molecular weight of the obtained homopolymers

Azobisisobutyronitlite (AIBN)-induced free radical polymerization of a methacrylate-based ionic liquid monomer, 1-(2-methacryloxyethyl)-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (Met-IL) was carried out in a common organic solvent, N,N-dimethylformamide (DMF), and an ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (EMImTFSI). The molecular weight of the obtained poly(Met-IL) was evaluated by transforming it to non-ionic poly(methyl methacrylate) with hydrolysis of the imidazolium-salt-substituted pendant ester groups and methyl esterification. Radical copolymerization with methyl methacrylate (MMA) was also carried out in both DMF and EMImTFSI. Analysis of copolymer composition revealed that the reactivity of Met-IL was lower than that of MMA in both DMF and EMImTFSI solutions.     

In situ binary sol–gel reaction of various trifunctional alkoxysilane in the silane‐grafted polyolefin matrix and its effect upon the mechanical properties

The vinyltrimethoxysilane‐grafted ethylene‐propylene copolymer/trifunctional methoxysilane (EPR‐g‐VTMS/RTMS) composites were prepared via in situ silica sol–gel reactions. Five trifunctional methoxysilane compounds (n‐hexyltrimethoxysilane, n‐decyltrimethoxysilane, n‐tetradecyltrimethoxysilane, n‐octadecyltrimethoxysilane, and phenyltrimethoxysilane) have been selected for this study. The water‐cross‐linked EPR‐g‐VTMS/RTMS composites were characterized by attenuated total reflectance‐Fourier transform infrared spectroscopy, gel content, solid‐state ²⁹Si CP/MAS NMR, wide‐angle x‐ray scattering, tensile strength, and field emission scanning electron microscopy measurements. The type of RTMS additive has a substantial influence on the nature of siloxane band networks and eventually the mechanical tensile properties. This finding suggests that the interaction and/or entanglement between the EPR‐g‐VTMS matrix and the substituent of the RTMS additives are crucial for the modifying mechanical properties. Moreover, for the water‐cross‐linked EPR‐g‐VTMS/CnTMS (n = 6, 10, 14, and 18) composites, the joint evidence provided by attenuated total reflectance‐Fourier transform infrared spectroscopy, ²⁹Si CP/MAS NMR, and wide‐angle x‐ray scattering results suggested the formation of ladder‐type poly(n‐alkyl silsesquioxane)s and the presence of the highly ordered structure with a thickness equal to the length of two n‐alkyl groups in all‐trans conformation. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers.     

Visible-light-active titanium oxide photocatalyst realized by an oxygen-deficient structure and by nitrogen doping

A visible-light (vis)-active titanium oxide photocatalyst was prepared by a simple wet process: the calcination of the hydrolysis product of Ti(SO₄)₂ with ammonia using an ordinary electric furnace in dry air at 400 °C. The color of this photocatalyst was vivid yellow and absorbed light in the blue (400 nm) to bluish-green (550 nm) region exclusively. Its structure was characterized to anatase with oxygen-deficient stoichiometry by XRD and X-ray photoelectron spectroscopy. Nitrogen was also detected, but only in trace amounts. Using blue-light-emitting diodes as a light source, 540 ppm of acetone was decomposed within 36 h and a stoichiometric yield of CO₂ was obtained. From the results of the crystalline size D, it was found that vis-activity could be realized on polycrystalline particles and the grain-boundaries (GBs) are thought to be important, since oxygen vacancies are easily created in GBs, which could form a GB state. Finally, we concluded that oxygen-deficient sites formed in GBs are important to emerge vis-activity, and nitrogen doped in the part of oxygen-deficient sites are important as a blocker for reoxidation.     

Fabrication and Pore Size Control of Large-Pore Mesoporous Silica Particles through a Solvent Evaporation Process

Large-pore mesoporous silica particles were synthesized through a solvent evaporation process using hydrophobic fumed silica particles and tetraethyl orthosilicate (TEOS) as silica sources. The solvent evaporation of an ethanol solution of fumed silica particles, TEOS, HCl and triblock copolymer (F127) resulted in mesoporous silica particles with pores with sizes of about 7 nm. In addition, the interplanar spacing of the mesoporous silica particles can be controlled by changing the solvent evaporation temperatures.     

硅橡胶膜生物反应器降解甲苯的细胞生长动力学

用新型硅橡胶膜生物反应器和假单孢菌(Pesudomonas putida mt-2)作为降解微生物,研究了溶解于废水中的甲苯的生物降解。实验测定了废水中甲苯的浓度,培养液中的细胞浓度和溶解氧浓度等。根据废水中甲苯浓度变化计算出的甲苯降解率在废水对培养液流量比为200/100mL h-1时达到93%,根据细胞浓度变化和甲苯浓度变化计算出的细胞比产率在流量比为30/100mL h-1时达到0.00221OD660 (mg L-1) -1。对细胞生长情况进行的分析表明,Monod方程难于描述这种反应器中的细胞生长动力学表现。在关于膜传质动力学问题研究的基础上,通过质量平衡方法构造了一个关于细胞生长的反应动力学模型,用模型进行的细胞生长理论计算与实验结果有较高的吻合程度。     

Measurement of High-Temperature Elastic Properties of Ceramics Using a Laser Ultrasonic Method

Young's modulus and Poisson's ratio of SiC ceramics at temperatures >1400°C were obtained using a laser ultrasonics method that included a Fabry-Pérot interferometer (LUFP). At temperatures <1000°C, Young's modulus and Poisson's ratio measured using the LUFP method agreed well with those measured using standard contact methods, such as the resonance method and the ultrasonic pulse method. These results showed that the LUFP method is a powerful tool for measuring high-temperature elastic properties of advanced ceramics in a noncontact manner.     

One‐shot radical polymerization of vinyl monomers with different reactivity accompanying spontaneous delay of polymerization for the synthesis of double‐network hydrogels

Double‐network hydrogels were conveniently synthesized by the one‐shot radical polymerization of an ionic monomer for the first network and a non‐ionic monomer for the second network in the presence of crosslinkers by simultaneous addition of the monomers, that is, one‐shot and spontaneous two‐step polymerization accompanying the delay of polymerization of a second network monomer. We analyzed the polymerization process based on the conversion of each monomer during the reaction in the absence of crosslinkers. Then we fabricated the double‐network hydrogels using several polymerization systems consisting of a conjugated monomer and a non‐conjugated monomer in the presence of the dual crosslinkers. We analyzed the swelling, mechanical and viscoelastic properties of hydrogels synthesized by one‐shot radical polymerization to confirm the production mechanism and the network structure of the hydrogels. © 2020 Society of Chemical Industry     

Synthesis and chemical properties of polyethyleneimines crosslinked by penta-2,4-dienylideneammonium unit

The reaction of N-(2,4-dinitrophenyl)pyridinium anion ( salt(A) ; A = Cl⁻, FeCl₄⁻, and (CN)₂N⁻) with linear polyethyleneimine (LPEI; M_n = 20 380) and branched polyethyleneimines (BPEI1; M_n = 600, BPEI2; M_n = 10 000) at various molar feed ratios without using a catalyst resulted in pyridinium ring opening to yield ionic LPEI and BPEIs that were crosslinked by conjugated penta-2,4-dienylideneammonium (PDA) units, LPEI-PDA , BPEI1-PDA , and BPEI2-PDA , respectively. A model compound was synthesized by the reaction of salt(Cl) with diethylamine. The solubilities of BPEI1-PDA and BPEI2-PDA depended on the feed ratios between salt(Cl) and BPEI1 or BPEI2. Dipping LPEI-PDA into water and methanol yielded hydro- and organogels, respectively. UV–vis and reflection measurements revealed an expanded π-conjugation length between the polymer chains due to the through-space orbital interaction of the electrons on the two nitrogen atoms at the crosslinked positions in LPEI-PDA , BPEI1-PDA , and BPEI2-PDA . Cyclic voltammetry analysis suggested that the polymers underwent electrochemical oxidation. Measurement using a superconducting quantum interference device (SQUID) indicated that LPEI-PDA having FeCl₄⁻ anions was paramagnetic. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48712.