Wheel/rail contact dynamics in turnout negotiations with combined nodal and non-conformal contact approach

In railroad turnouts, geometries of tongue and crossing rails are very complex and their shapes are changing along the track. Therefore, wheels are subjected to not only tread and flange contacts, but also the back-of-flange and top-of-flange contacts in the case of spring switches of tram vehicles. For this reason, one needs to deal with significant jumps in contact points for solving wheel/rail contact problems in turnout, and an accurate prediction of jumps in contact points is one of the most important issues that need to be carefully handled in the dynamic simulation of vehicle/turnout interactions. In this investigation, a numerical procedure that can be used for solving such a complex wheel/rail contact problem in turnout is proposed. In particular, a combined nodal and non-conformal contact approach is developed such that significant jumps in contact points are detected using the nodal search, while the exact location of contact point is then determined with continuous surface parameterizations using non-conformal contact equations. With this combined nodal and non-conformal contact approach for the contact geometry analysis of vehicle/turnout interactions, multiple look-up contact tables can be generated in an efficient way without losing accuracy. Since detailed contact search is performed off-line to obtain look-up contact tables, significant changes in contact points in turnout can be efficiently predicted on-line with tabular data to be interpolated in a standard way. Several numerical examples are presented in order to demonstrate the use of the numerical procedure developed in this investigation.     

Disinfection of Legionella pneumophila by ultrasonic treatment with TiO2

An ultrasonic treatment system, using a TiO₂ photocatalyst, was used to disinfect Legionella pneumophila. A kinetic study of the process indicates that TiO₂ significantly improves the disinfection process. The concentrations of viable cells were reduced to 6% of the initial concentrations in the presence of 0.2 g/ml TiO₂ after a 30 min of treatment period, while only an 18% reduction was observed in the absence of TiO₂. The potency of the disinfection could be enhanced, to some extent, by increasing the amount of TiO₂ used. Cell concentrations were decreased by an order of 3 within 30 min of treatment in the presence of 1.0 g/ml TiO₂. The disinfection power in the presence of TiO₂ versus Al₂O₃ was also compared and the findings showed that TiO₂ induced a higher cell killing. No significant effect of initial cell concentration on the disinfection was found in the range of 10²-10⁷ CFU/ml after a 30 min of treatment period. The mechanism of cell killing was investigated by examining the effects of OH radical scavengers such as ascorbic acid, histidine and glutathione. The disinfection power was reduced in samples that contained these radical scavengers, thus indicating the importance of OH radicals.     

A full‐color eyewear display using planar waveguides with reflection volume holograms

Abstract— A full‐color eyewear display with over 85% see‐through transmittance with a 16° horizontal field of view was developed. Very low color crosstalk, less than 0.008 Δu′v′ uniformity, and 120% NTSC color gamut were achieved. Waveguides with two in‐ and out‐coupling reflection volume hologram elements enabled a simple configuration that has an optical engine beside the user's temples. The reflection volume hologram elements used on the waveguides realized a small thickness of 1.4 mm for each waveguide, and an out‐coupling reflection volume hologram used as an optical combiner contributed a high see‐through transmittance of 85% due to its wavelength selectivity. However, there are technical challenges in achieving a reasonable screen size and quality color images with optics that utilize holographic waveguides because holograms have large chromatic dispersions compared to conventional optical elements such as lenses and mirrors. Approaches to overcome these issues are described.     

Effects of Neodymium Concentration on Optical Characteristics of Polycrystalline Nd:YAG Laser Materials

A neodymium-doped yttrium-aluminum garnet (Y₃A1₅O₁₂, YAG) (Nd:YAG) ceramic that contained 0.3–4.8 at.% neodymium additives and exhibited nearly the same optical properties as those of a single crystal was fabricated by a solid-state reaction method using high-purity powders. Although the integrated absorption intensity of the ²H_9/2+⁴F_5/2 bands simply increased as the neodymium concentration in the YAG ceramics decreased, the fluorescence intensity of the 2.4 at.% Nd:YAG ceramic was the strongest among Nd:YAG ceramics with various neodymium concentrations and a 0.9 at.% Nd:YAG single crystal. An oscillation experiment was performed on a continuous-wave (cw) laser with a diode-laser exciting system using those ceramics and the single crystal. The oscillation threshold and slope efficiency in that analysis were 309 mW and 28%, respectively, for the 1.1 at.% Nd:YAG ceramics and 356 mW and 40%, respectively, for the 2.4 at.% Nd:YAG ceramics. The lasing characteristics of the ceramics in the present work were superior to those of a 0.9 at.% Nd:YAG single crystal that was fabricated by the Czochralski (Cz) method.     

Re-evaluation of Radiation-Energy Transfer to an Extraction Solvent in a Minor-Actinide-Separation Process Based on Consideration of Radiation Permeability

ABSTRACT

Absorbed-dose estimation is essential for evaluation of the radiation tolerance of minor-actinide-separation processes. We propose a dose-evaluation method based on radiation permeability, with comparisons of heterogeneous structures seen in the solvent-extraction process, such as emulsions forming in the mixture of the organic and aqueous phases. A demonstration of radiation-energy-transfer simulation is performed with a focus on the minor-actinide-recovery process from high-level liquid waste with the aid of the Monte Carlo radiation-transport code PHITS. The simulation results indicate that the dose absorbed by the extraction solvent from alpha radiation depends upon the emulsion structure, and that from beta and gamma radiation depends upon the mixer-settler-apparatus size. Non-negligible contributions of well-permeable gamma rays were indicated in terms of the plant operation of the minor-actinide-separation process.     

Long-term results of mitral valvuloplasty for mitral regurgitation

From July 1979 to February 1995, 126 patients, including 4 reoperations, aged between 6 months and 77 years underwent mitral valve repair for mitral regurgitation. The patients were divided in two groups, 46 patients aged less than 16 years in pediatric age group and the other 80 patients in a dult group. The methods consisted of asymmetric annuloplasty (Kay-Reed method) in 98 patient, Carpentier-Edwards ring annuloplasty in 14, quadrangular resection of the posterior leaflet with annuloplasty in 9, and chordal and leaflet repair in 5. There was no hospital nor late death in pediatric age group. Three hospital deaths and one late death were in adult group. Follow-up was 96% complete and totaled 812.1 patient years. Reoperations underwent in 3 pediatric patients and 9 adults. At 15 years' follow-up, freedom from reoperation was 91.5 +/- 4.7% in pediatric age group and 67.1 +/- 12.7% in adults. Freedom from event was 63.5 +/- 12.1% in adult group. These results suggest that mitral repair with Kay-Reed method in pediatric age group is favorable for long-term. In contrast, indications for mitral reconstraction with other methods including ring annuloplasty should be extended for aged patients with severely dilated annuls and degenerated leaflets.     

Formation process of Na-X zeolites from coal fly ash

In order to synthesize Na-X zeolite from coal fly ash (Fa), Fa was pretreated under stirring condition at various temperatures of 20–50°C for 72 h and then aged at 85°C for a given period with NaOH solutions. The resulting materials were characterized by various means. When Fa was aged for 72 h without pretreatment, species P were formed. As the pretreating temperature raised from 20 to 50°C, the degree of crystallinity of faujasite increased, while that of species P decreased. The faujasite species formed was identified as Na-X zeolite with molar ratio SiO₂/Al₂O₃ = 2.4. When Fa was pretreated at 50°C and aged for 60 h, the only species formed was Na-X zeolite. Increasing the pretreating temperature up to 50°C results in the increase of Si⁴⁺ and Al³⁺ concentrations in the treating solution by dissolution of amorphous material in Fa. With the conditions used, the crystalline phase, such as -quartz and mullite, was poorly dissolved during the treatment. Hence, the higher pretreating temperature would give the uniform nucleation and crystal growth of Na-X zeolite during the aging.     

Development of new‐type outdoor termination using composite insulator with SF6 gas: Commercial use for 77‐kV transmission lines and development for 154‐kV XLPE cable

Recently, composite insulators have been increasingly employed mainly for economic reasons. We have developed a new type of outdoor termination using a composite insulator, which can be installed horizontally on a steel tower in order to reduce the construction cost. In this outdoor termination, SF₆ gas is filled in the composite insulator and a cold shrinkable premolded rubber unit is applied instead of the combined use of a rubber‐molded stress relief cone, epoxy resin insulator and spring unit. The application of the composite insulator, SF₆ gas and cold shrinkable premolded rubber unit reduces the total weight and makes it possible to install the termination horizontally on the tower. The new‐type outdoor termination for 77‐kV XLPE cable has already been applied in commercial use and enabled a reduction of the construction costs for power transmission lines. A 154‐kV new‐type outdoor termination has been developed and its initial electrical tests were successfully completed. This paper describes the design and performance of both 77‐kV and 154‐kV new‐type outdoor termination, and a follow‐up survey of the 77‐kV new termination in a commercial use. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(4): 18– 26, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20511     

Future prospect of remote Cat-CVD on the basis of the production, transportation and detection of H atoms

The future prospect of remote Cat-CVD, in which the decomposition and the deposition chambers are separated, is discussed on the basis of the absolute density measurements of H atoms. It is now well recognized that uniform deposition is possible on a large area without plasma damages by Cat-CVD. However, we may not overlook the demerits in Cat-CVD. One of the demerits is the poisoning of the catalyzer surfaces by the material gases, both temporary and permanent. One technique to overcome this problem is remote Cat-CVD. The question is how to separate the decomposition and deposition areas. If the separation is not enough, there should be back diffusion of the material gases, which will poison the catalyzers. If the separation is too tight, radicals may not effuse out from the decomposition chamber. These problems are discussed and it is shown that SiO₂ coating to reduce the radical recombination rates on walls is promising. The possibility of the polytetrafluoroethene coating by Cat-CVD is also discussed.