Surface Orientation and Wetting Phenomena in Si/α-Alumina System at 1723 K

Wetting phenomena and the effect of alumina surface orientation on the wettability in Si/α-Al₂O₃ system were studied by an improved sessile drop method using     ,     , C(0001) faces of single crystals and polycrystals at 1723 K in a reducing Ar–3% H₂ atmosphere. The contact angles show a vibration behavior for all the single crystals but to a less extent for the polycrystals. The extent of the vibration correlates not only with the reaction intensity but also with the stability of the Si droplet on the alumina surfaces. The interfacial reaction leads to the formation of a series of reaction rings, which is more serious at the single crystal surfaces. More importantly, the wettability is dependent on the alumina surface orientation, with the intrinsic contact angles being about 98±2°, 101±1°, 69±1°, and 98±2°, respectively, for the     ,     , C(0001) and polycrystal α-Al₂O₃ substrates. The much smaller contact angle for molten Si on the C(0001) surface is explained by the favorable reduction in the Si/α-Al₂O₃ interfacial free energy by the terminated and enriched aluminum atoms at the reconstructed     surface. The importance of the aluminum presence at the Si/α-Al₂O₃ interface to the wettability of this system was further demonstrated by a substantial improvement in the wettability of the     α-Al₂O₃ substrates by Si–Al alloys.     

Highly anisotropic thermal conductivity of mesogenic epoxy resin film through orientation control

To develop insulating materials with a high thermally conductive anisotropy, planarly aligned mesogenic epoxy (ME) resin film was fabricated by uniaxial coating on a hydrophobic polyethylene terephthalate substrate. Grazing incidence small-angle X-ray scattering (GISAXS) and transmission SAXS measurements exhibited that the films spontaneously formed uniaxially aligned monodomain-like smectic structures by curing on the hydrophobic substrate. Then, an in- and out-of-plane thermal conductivity of 10 and 0.048 W m⁻¹ K⁻¹ and outstanding thermal conductivity anisotropy of 208 have been confirmed, respectively. The ME resin films with high thermal conductivity can be applied as insulating materials for multiple-layer electrical and electronic devices.     

High-temperature oxidation of pure titanium in CO2 and Ar-10%CO2 atmospheres

The oxidation behavior of pure titanium has been investigated in the temperature range of 1000 K to 1300 K in CO₂ or Ar-10%CO₂. Optical microscopy, electron probe microanalyses, and X-ray measurements on the oxide scales formed during oxidation indicate that their structures are nearly independent of temperature and the corrosion atmosphere. The scales consisted of two layers, an external one and an internal one, having a rutile (TiO₂) structure. The parabolic rate law was confirmed for growth of the external scale and the permeation depth of oxygen in titanium with apparent activation energies of 266 and 226 kJ/mol, respectively. The rate-determining diffusion species in the oxidation processes are discussed.     

Difference between mechanical alloying and mechanical disordering in the amorphization reaction of Al50Ta50 in a rod mill

Amorphous Al₅₀Ta₆₀ alloy powders have been synthesized by mechanical alloying (MA) from elemental powders of aluminium and tantalum, and mechanical disordering (MD) from crystalline intermetallic compound powders of AlTa respectively using the rod milling technique. The mechanically alloyed and the mechanically disordered alloy powders were characterized by X-ray diffraction, scanning electron microscopy, electron probe microanalysis, transmission electron microscopy, differential thermal analysis, differential scanning calorimetry and chemical analysis. The results have shown that the crystal-to amorphous transformation in the MD process occurs through one stage, while the crystallineto-amorphous formation in the MA process occurs through three stages. At the early and intermediate stages of the MA time, heating the alloy powders to 700 K leads to the formation of an amorphous phase by a solid-state amorphizing reaction. At the final stage of the MA time, the amorphous phase is crystallized through a single sharp exothermic peak. Contrary to this, amorphous alloy powders produced by MD are crystallized through two broad exothermic peaks.     

Set-based particle swarm optimization with status memory for knapsack problem

Set-based particle swarm optimization (S-PSO) operates on discrete space. S-PSO can solve combinatorial optimization problem with high quality and is successful to apply to the large-scale problem. In S-PSO, a velocity is a set with possibility and a position is a candidate solution. In this paper, we present a novel algorithm of set-based particle swarm optimization with status memory (S-PSOSM) to decide the position based on the previous position for solving knapsack problem. Some operators are redefined for S-PSOSM. S-PSOSM is a simple algorithm because the state of probability reduces. In addition, the weight of S-PSOSM is discussed. S-PSOSM shows high qualities in experimental results.     

Generalized measuring-worm algorithm: high-accuracy mapping and movement via cooperating swarm robots

Recently, many extensive studies have been conducted on robot control via self-positioning estimation techniques. In the simultaneous localization and mapping (SLAM) method, which is one approach to self-positioning estimation, robots generally use both autonomous position information from internal sensors and observed information on external landmarks. SLAM can yield higher accuracy positioning estimations depending on the number of landmarks; however, this technique involves a degree of uncertainty and has a high computational cost, because it utilizes image processing to detect and recognize landmarks. To overcome this problem, we propose a state-of-the-art method called a generalized measuring-worm (GMW) algorithm for map creation and position estimation, which uses multiple cooperating robots that serve as moving landmarks for each other. This approach allows problems of uncertainty and computational cost to be overcome, because a robot must find only a simple two-dimensional marker rather than feature-point landmarks. In the GMW method, the robots are given a two-dimensional marker of known shape and size and use a front-positioned camera to determine the marker distance and direction. The robots use this information to estimate each other’s positions and to calibrate their movement. To evaluate the proposed method experimentally, we fabricated two real robots and observed their behavior in an indoor environment. The experimental results revealed that the distance measurement and control error could be reduced to less than 3 %.     

Variable space diversity, crossover and mutation in MOEA solving many-objective knapsack problems

In this work, we analyze variable space diversity of Pareto optimal solutions (POS) and study the effectiveness of crossover and mutation operators in evolutionary many-objective optimization. First we examine the diversity of variables in the true POS on many-objective 0/1 knapsack problems with up to 20 items (bits), showing that variables in POS become noticeably diverse as we increase the number of objectives. We also verify the effectiveness of conventional two-point and uniform crossovers, Local Recombination that selects mating parents based on proximity in objective space, and two-point and uniform crossover operators which Controls the maximum number of Crossed Genes (CCG). We use NSGA-II, SPEA2, IBEA _??+? and MSOPS, which adopt different selection methods, and many-objective 0/1 knapsack problems with $n=\{100,250,500,750,\mbox{1,000}\}$ items (bits) and m?=?{2,4,6,8,10} objectives to verify the search performance of each crossover operator. Simulation results reveal that Local Recombination and CCG operators significantly improve search performance especially for NSGA-II and MSOPS, which have high diversity of genes in the population. Also, results show that CCG operators achieve higher search performance than Local Recombination for m?≥?4 objectives and that their effectiveness becomes larger as the number of objectives m increases. In addition, the contribution of CCG and mutation operators for the solutions search is analyzed and discussed.     

A content search system considering the activity and context of a mobile user

People routinely carry mobile devices in their daily lives and obtain a variety of information from the Internet in many different situations. In searching for information (content) with a mobile device, a user’s activity (e.g., moving or stationary) and context (e.g., commuting in the morning or going downtown in the evening) often change, and such changes can affect the user’s degree of concentration on his or her mobile device’s display and information needs. Therefore, a search system should provide the user with an amount of information suitable for the current activity and a type of information suitable for the current context. In this study, we present the design and implementation of a content search system that considers a mobile user’s activity and context, with the goal of reducing the user’s operation load for content search. The proposed system switches between two kinds of content search systems according to the user’s activity: the location-based content search system is activated when the user is stationary (e.g., standing and sitting), while a menu-based content search system is activated when the user is moving (e.g., walking). Both systems present information according to user context. The location-based system presents detailed information via menus and a map according to location-based categories. The menu-based system presents only a few options to enable users to get content easily. Through user experiments, we confirmed that participants could get desired information more easily with this system than with a commercial search system.     

Some properties of mullite powders prepared by chemical vapour deposition

The sinterability of mullite (3Al₂O₃·2SiO₂) powder prepared by chemical vapour deposition was examined to improve the conditions for fabricating dense mullite ceramics. The starting powder contained not only mullite, but also a small amount of -Al₂O₃ (Al-Si spinel) and amorphous material. Although the compressed powder was fired at a temperature between 1550 and 1700 °C for 1, 3 and 5 h, the relative densities of the sintered compacts were limited to 90%: (i) due to the creation of pores/microcracks during the solid state reaction (1100–1350 °C), and (ii) due to restriction on the rearrangement of grains because the amount of liquid phase (1550–1700 °C) was insufficient. Calcination of the starting powder was effective for preparation of easily sinterable powder with homogeneous composition. When the compact formed by compressing the calcined powder at 1400 °C for 1 h was fired at 1650 °C for 3 h, the relative density was raised up to 97.2%; moreover, mullite was the only phase detected from the sintered compact. The sintered compact was composed of polyhedral grains with sizes of 1–2 m and elongated grains with long axes of 6 m.     

Effects of fiber orientation angles of fiber-reinforced plastic on sand solid particle erosion behaviors

Solid particle erosion in industrial applications has been a serious problem in many engineering fields. Earlier studies on fiber-reinforced plastic (FRP) composites were mainly focusing on the erosive wear behavior at several different impact angles. However, the effect of fiber orientation on FRP composites has not been thoroughly investigated. Since fiber orientation is one of the important factors in which causing erosive wear damages to FRP composites, in order to understand the virtue of this problem, it is important to investigate the effect of fiber orientation at different impact angles. In this research, the effect of fiber orientation of unidirectional fiber-reinforced plastic composites on erosive wear behavior was studied. Sandblasting-type erosion tests were conducted on the FRP composites with fiber orientation ranging at three impact angles to clarify the relation between fiber orientation and erosive wear behavior. The Dyneema fiber (ductile material) and the carbon fiber (brittle material) were used for the reinforcement fiber in FRP. From the result, it is confirmed that CFRP composites with higher fiber orientation angle erode faster than the composites with lower fiber orientation angle. But the erosion characteristic of DFRP was almost the same regardless of the fiber orientation angle. The damaged surfaces of the FRP composites were then analyzed using scanning electron microscopy and the possible erosion wear mechanisms were investigated.