Intra-body data transmission for the personal area network

Intra-body communication is a wireless means of exchanging information within a personal area network (PAN) between wearable electronic sensors and devices. The feasibility of intra-body communication is confirmed through several experiments on signal propagation within the human body, and a human phantom is designed and used to obtain reproducible results over repeated experiments. Based on the results of these experiments, a prototype transmission system is constructed using aluminum electrodes powered by 3 V DC and operating in the 10.7 MHz frequency modulation (FM) band. This prototype is demonstrated to be capable of transmitting analog signals through the human subjects in the presence of external noise. Digital data transmission at 9600 bps is also achieved using newly fabricated 10.7 MHz frequency shift keying (FSK) transmitter and receiver devices. The carrier frequency of 10.7 MHz is the intermediate frequency of FM radio receivers, meaning that the proposed system can make use of a wide selection of inexpensive, commercial radio frequency devices.     

Address‐While‐Display technique combined with gas‐discharge AND logic for driving AC‐PDPs

A hybrid AWD/AND drive technique has been developed in which an Address‐While‐Display (AWD) scheme is combined with an AND logic characteristic that gas discharges demonstrate. The AWD technique enables AC‐PDPs to be driven at high luminance, while the AND logic reduces the number of scan drivers by an order of magnitude. A detailed analysis of the addressing operation has been made. The hybrid drive utilizes the AND logic in two ways: (1) a combination of two voltage pulses and (2) a combination of a voltage pulse and discharge‐priming particles. It was found that the addressing operation requires the establishment of a discharge between the scan and data electrodes, and also between the scan and display electrodes.     

Preparation of BaTiO3 ultrafine particles by micro-emulsion charring method

Ultrafine BaTiO₃ particles were prepared by a micro-emulsion charring (MEC) method. The MEC method consisted of two steps. The first step is the preparation of a water/oil micro-emulsion with BaTiO₃ elements, and the second is a low temperature firing process in N₂ atmosphere, which includes charring of oil in an emulsion and powdering BaTiO₃ particles with the char. The char formed around BaTiO₃ particles prevents an agglomeration of BaTiO₃ particles during firing. In the present experiment, the W/O ratio and the amount of emulsifier greatly influenced the size of droplets of the emulsion. The charring temperature was another important experimental factor in order to obtain the desired BaTiO₃ particles. The finally obtained BaTiO₃ charring powders were monodispersed spherical particles and the particle size was 0.1 m to 0.5 m.     

Synthesis of Hadamard transformers by use of multimode interference optical waveguides

We propose a synthesis method of optical Hadamard transformer using multimode interference (MMI) couplers. By using the signal transfer matrix of 2 x 2, 4 x 4, and 8 x 8 MMI couplers, we show that sum and difference units of input signals can be synthesized. An interchange unit of two signals can also be synthesized. One synthesis method of Hadamard transformers is a combination of only 2 x 2 units, and the other is a combination of N x N(N > or = 4) units as well as 2 x 2 units. The design examples of operation units are shown, and the size and the output power of Hadamard transformers are estimated.     

Tunable Continuous-Wave Yb:YLF Laser Operation with a Diode-Pumped Chirped-Pulse Amplification System

We have demonstrated a diode-pumped Yb:LiYF(4) (Yb:YLF) laser oscillator for the first time to our knowledge. A wide tuning range of 25 nm and a high slope efficiency of 50% were obtained at a high laser-diode pump intensity of 100 kW/cm(2). Emission and absorption spectra of the Yb:YLF crystal at 8 K represent a wide laser gain width of 38 nm, indicating efficient laser operation similar to that of a four-level laser system with a reduced saturation fluence of 11 J/cm(2).     

An 8.1-ns Column-Access 1.6-Gb/s/pin DDR3 SDRAM With an 8:4 Multiplexed Data-Transfer Scheme

Three circuit techniques for an 8.1-ns column-access 1.6-Gb/s/pin 512-Mb DDR3 SDRAM using 90-nm dual-gate CMOS technology were developed. First, an 8:4 multiplexed data-transfer scheme, which operates in a quasi-4-bit prefetch mode, achieves a 3.17-ns reduction in column-access time, i.e., from 11.3 to 8.13 ns. Second, a dual-clock latency counter reduces standby power by 22% and cycle time from 1.7 to 1.2 ns. Third, a multiple-ODT-merged output buffer enables selection of five effective-resistance values Rtt (20, 30, 40, 60, and 120 Omega) without increasing I/O capacitance. Based on these techniques, 1.6-Gb/s/pin operation with a 1.36-V power supply and a column latency of 7 was accomplished     

ADAPTIVE CONTROL DESIGN FOR NONLINEARLY PARAMETERIZED SYSTEMS WITH A TRIANGULAR STRUCTURE

A novel adaptive backstepping design for a class of nonlinearly parameterized systems with a triangular structure is proposed. Under the Lipschitz condition with respect to unknown parameters of the system, an effective adaptive controller is designed without the requirement on the compactness of the unknown parametric set. Especially, the proposed adaptive control enables the advantage of “tuning function concept”, which results in only one estimation law for the unknown parameters. Our simulation with induction motor model particularly shows the viability of the obtained results.     

Development of spectral band cloning techniques for soil nutrients estimation

Satellite‐based monitoring is an indispensable tool to guide soil‐specific crop management. However, it has attained little success in the estimation of soil nutrients due to the limitations incurred from inherent spectral characteristics. In this study, spectral band cloning (SBC) is developed and proposed to augment the soil nutrient predictive capabilities of broadband satellite data. Fine‐spectral channels of spectrometers were synchronized with coarse resolution of IRS satellite data to generate nutrient‐sensitive cloned IRS bands. Soil samples, collected at the time of satellite image acquisition in Lop Buri, Thailand, were analyzed both spectrally and chemically, viz., soil organic matter (OM), phosphorus, potassium and iron. The resulting SBC‐based models showed acceptable correlations, which otherwise were unattainable from raw IRS bands through prevailing models. Accuracy and validation measures showed good agreements between the measured and estimated nutrient surfaces. It is concluded that the SBC is a promising method of quantitative soil nutrient mapping, and could further be used for identification and mapping of other indiscernible biophysical parameters.