A Novel Gateway Selection Technique for Throughput Optimization in Configurable Wireless Mesh Networks

Wireless mesh networks (WMNs) have attracted much attention due to their low up-front cost, easy network deployment, stable topology, robustness, reliable coverage, and so forth. These advantages are suitable for the disaster recovery applications in disaster areas, where WMNs can be advantageously utilized to restore network collapse after the disaster. In this paper, based on a new network infrastructure for WMNs, to guarantee high network performance, we focus on the issue of throughput optimization to improve the performance for WMNs. Owing to selecting different mesh router (MR) as the gateway will lead to different network throughput capacity, we propose a novel gateway selection technique to rapidly select the optimal MR as the gateway, in order to maximize the network throughput. In addition, we take into account the traffic distribution for the MR to eliminate traffic congestion in our method. The performance of our proposed method is evaluated by both numerical and simulated analysis. The simulation results demonstrate that the gateway selection method is effective and efficient to optimize the throughput for WMNs.     

A 1.0-V 230-MHz column access embedded DRAM for portable MPEGapplications

This paper describes a 32-Mb embedded DRAM macro fabricated using 0.13-μm triple-well 4-level Cu embedded DRAM technology, which is suitable for portable equipment of MPEG applications. This macro can operate 230-MHz random column access even at 1.0-V power supply condition. The peak power consumption is suppressed to 198 mW in burst operation. The power-down standby mode, which suppresses the leakage current consumption of peripheral circuitry, is also prepared for portable equipment. With the collaboration of array circuit design and the fine Cu metallization technology, macro size of 18.9 mm² and cell efficiency of 51.3% are realized even with dual interface and triple test functions implemented     

Effects of base layer thickness on reliability of CVD Si3N4 stack gate dielectrics

Effects of the base layer in Si₃N₄/SiON stack gate dielectrics, in particular, the physical thickness of the base layer, on the dielectric reliability, MOSFET performance and process controllability are investigated. It is found that the electrical characteristics such as TDDB lifetime as well as the Si₃N₄ film property in Si₃N₄/SiON stack dielectrics with the same capacitance oxide equivalent thickness strongly depend on the SiON-base layer thickness. From the TDDB measurements for both stress polarities and from the Si₃N₄ stoichiometry by the X-ray photoelectron spectroscopy analysis, the optimum SiON-base layer thickness is determined to be approximately 1 nm, in order to obtain longer TDDB lifetime and surperior n-ch MOSFET performance. The obtained results are considered to attribute to the nitrogen profile in the Si₃N₄/SiON stack dielectrics and the strained layer thickness near SiON/Si interface.     

Measurement of RF Transmission Mode in ITER Relevant EC H&;CD Transmission Line

The preliminary results of mode measurement in the ITER relevant 40 m long transmission test line composed from 63.5 mm diameter corrugated waveguides and miter bends are presented. The field patterns were measured by taking temperature profiles on a paper screen placed in front of the waveguide end using an infrared imaging camera. The complex electric field at the waveguide end was retrieved from the measured temperature profiles. As a result, the transmission power includes 87% of HE₁₁ mode and 6% of LP₁₁ odd (HE₂₁+TE₀₁) mode and small ratios of other modes. The mode content had small dependence on length of the transmission line. This result indicated that the higher order mode content generated at the input of the transmission line is conserved and propagated through the transmission line. This suggests that the initial RF coupling to the waveguide is critical since it affects the launcher efficiency.     

Subcellular localization of fructosyl amino acid oxidases in peroxisomes of Aspergillus terreus and Penicillium janthinellum

Fructosyl amino acid oxidase (FAOD) is the enzyme catalyzing the oxidative deglycation of Amadori compounds, such as fructosyl amino acids, yielding the corresponding amino acids, glucosone, and H(2)O(2). In a previous report, we determined the primary structures of cDNAs coding for FAODs from two fungal strains Aspergillus terreus AP1 and Penicillium janthinellum and we found that both fungal FAODs included the putative peroxisome targeting signal 1 (PTS1) at the carboxyl terminal (Yoshida, N. et al., Eur. J. Biochem., 242, 499-505, 1996). In this study, we determined the intracellular localization of FAODs in these two fungi. Subcellular fractionation experiments and immuno-electronmicroscopic observations, together with the previous findings indicated that the FAODs were localized in peroxisomes of A. terreus AP1 and P. janthinellum. These FAODs were also found to belong to a new member of "peroxisomal sarcosine oxidase family protein" in eucaryotic cells.     

A novel hemiacetal dehydrogenase activity involved in ethyl acetate synthesis in Candida utilis

Acetate ester synthesis was studied in vitro with the ethyl acetate-producing yeast Candida utilis. The level of enzyme activity observed for the NAD+-dependent hemiacetal dehydrogenase acting on hemiacetal, which was produced non-enzymatically from an alcohol and an aldehyde, was much greater than that for the other enzyme involved in ester synthesis, alcohol acetyltransferase. The level of ethyl acetate synthesis in vivo approximately paralleled the hemiacetal dehydrogenase (HADH) activity. The results suggest that the main pathway for ethyl acetate synthesis in C. utilis involves a novel hemiacetal dehydrogenase activity.     

Adaptive Fault Diagnosis of Analog Circuits by Operation-Region Model and X–Y Zoning Method

We have proposed a method for diagnosing analog circuits that is realized by combining the operation-region model and the X–Y zoning method. In the method, we could implement a diagnosis procedure based on a diagnostic method for digital circuits because we developed a data processing method to handle data discretely. In this paper, we improve the method by using an adaptive test to obtain a shorter diagnostic sequence length and show its characteristics. Moreover, we propose a new data processing method that utilizes the output response of a circuit to obtain better diagnostic performance. We demonstrate the effectiveness of the proposed methods by applying them to ITC’97 benchmark circuits with hard faults and soft faults. These improved methods can reduce the diagnostic sequence length without degrading the performance of diagnostic resolution and CPU time.     

Theatre in the Sky: a ubiquitous broadband multimedia‐on‐demand service over a novel constellation composed of quasi‐geostationary satellites

To meet an ever‐growing demand for wideband multimedia services and electronic connectivity across the world, development of ubiquitous broadband multimedia systems is gaining a tremendous interest at both commercial and academic levels. Satellite networks will play an indispensable role in the deployment of such systems. A significant number of satellite communication constellations have been thus proposed using Geostationary (GEO), Medium Earth Orbit (MEO), or Low Earth Orbit (LEO) satellites. These constellations, however, either require a potential number of satellites or are unable to provide data transmission with high elevation angles. This paper proposes a new satellite constellation composed of Quasi‐GeoStationary Orbit (Quasi‐GSO) satellites. The main advantage of the constellation is in its ability to provide global coverage with a significantly small number of satellites while, at the same time, maintaining high elevation angles. Based on a combination of this Quasi‐GSO satellites constellation and terrestrial networks, the paper proposes also an architecture for building a global, large‐scale, and efficient Video‐on‐Demand (VoD) system. The entire architecture is referred to as a ‘Theatre in the Sky’. Copyright © 2006 John Wiley & Sons, Ltd.     

Simple plunge freezing applied to plant tissues for capturing the ultrastructure close to the living state

In order to observe the ultrastructure close to the living state, simple plunge freezing in liquid propane was applied to plant tissues. The method yielded a well-preserved ultrastructure to a depth of up to 40 microm from the surface of the young pea leaves, which were used as the specimen. Within the well-frozen area all membranes appeared smooth and the ultrastructural details of each organelle were similar to those obtained by high-pressure freezing. Several physical connections between the membranes were visualized. The relative simplicity and the satisfactory freezing performance of the method render it suitable for capturing the features of actively functioning cells in routine ultrastructural studies.     

A Terahertz Video Camera Patch Sheet with an Adjustable Design based on Self-Aligned, 2D,Suspended Sensor Array Patterning

Terahertz (THz) imaging is expected to become powerful tools for non-destructive inspections. To ensure the practical use of THz non-destructive monitoring, versatile THz imagers with adjustable designs that can eliminate the complexities and the bulkiness of the device are urgently required. Herein, a self-aligned filtration process for a 2D, free-standing carbon nanotube film array and its application to a THz video camera patch are reported. The presented techniques enable a) to freely design the camera size, sensor array pattern, and suspended shape according to its applications, b) to cut the camera patch into desired shapes, and c) to attach them to the objects that are intended to be measured. Real-time, non-destructive monitoring of various infrastructures is demonstrated. These results indicate that it can function regardless of restrictions, such as the shapes and locations of the measurement samples, thus providing a strong possibility for use in future non-destructive sensor networks.