直接拉伸试验及Superpave规范系统研究蜡对沥青低温性能的影响

用两种不同分子量的石蜡及一种微晶蜡掺和在沥青中,来研究蜡的性能(如分子量分布、平均分子量等)对沥青低温性能的影响.用Superpave沥青胶结料性能规范系统的BBR、DTT、临界龟裂温度(Tcritical)及玻璃转换温度(Tg)来研究掺有3%或6%蜡的沥青低温性能,低分子量及分子量分布窄的石蜡降低了沥青的DTT破坏应力,同时增加了正割模量(Secant Modulus)及BBR的热应力.微晶蜡对沥青的DTT破坏应力的影响比较少,并且不影响正割模量,但增加了BBR的热应力;但当将不同蜡的沥青混合,即将蜡的分子量分布扩大,则DTT破坏应力略为降低,正割模量不变,而BBR的热应力则减少.换言之,如果将含不同蜡的沥青混合,则蜡对沥青低温性能的影响降低,这会改善含蜡沥青的低温性能,原因可能是蜡的凝结受其分子量所影响,较宽的分子量分布会导致蜡在较宽的温度范围内慢慢凝结,缓和了蜡突然结晶对沥青低温性能的有害反应.     

Assessment of allelopathic potential inArtemisia princeps var.Orientalis residues

Field and laboratory studies were conducted to examine the differential phytotoxicity of residues ofArtemisia princeps var.orientalis (wormwood) using various plants as test species. Seedling elongation and dry weights of receptor plants were inversely proportional to the concentration and incubation time of dry leaves ofA. princeps var.orientalis in vermiculite. In seedling growth tests with abandoned field soils (control) and soil underneath wormwood plants (test), the elongation, dry weight, and caloric content of seedlings grown in the soil from under wormwood plants were severely inhibited, thereby suggesting that certain growth inhibitors were released from wormwood and the inhibitor remained in the soil.     

Hemostatic risk factors of coronary artery disease in the Chinese

Induction of the mitochondrial permeability transition in vitro is well-characterized and widely implicated in the mechanism of oxidant-induced cell death. Despite an abundance of in vitro evidence, implication of mitochondrial dysfunction in the mechanism of chemical toxicity in vivo awaits demonstration of the induction of the mitochondrial permeability transition in tissues from intoxicated animals. Menadione (2-methyl-1,4-naphthoquinone), an agent known to induce the permeability transition in isolated liver mitochondrial in vitro, was administered as a single bolus to adult male rats, and hepatic mitochondria were isolated 24 h later. Mitochondria from menadione-treated rats exhibited an increased sensitivity to calcium-induced inhibition of state 3 respiration and loss of respiratory control, as well as a greater sensitivity to calcium-induced calcium release that was inhibited by cyclosporine A. Associated with this was the depolarization of membrane potential and swelling of mitochondria from menadione-treated animals, but not control animals. Both the calcium-dependent depolarization and swelling of mitochondria from menadione-treated rats were inhibited by adding either cyclosporine A or ruthenium red. The results are consistent with the induction of the mitochondrial permeability transition and provide the first evidence for the manifestation of an increased sensitivity to this response as a result of chemical exposure in vivo.     

Fabrication of a highly bendable LCD with an elastomer substrate by using a replica‐molding method

Abstract— A highly bendable liquid‐crystal display was fabricated by using a multi‐functional elastomer substrate of self‐aligning LC molecules without any surface treatment. One of the two substrates is a plastic substrate while the other is a multi‐functional elastomer substrate produced by a replica‐molding technique. The multi‐functional elastomer substrate has pixel‐encapsulating walls that serve as spacers and provide mechanical stability and reproducibility against bending deformations. The highly bendable LCD demonstrates great flexibility, durability, and excellent electro‐optic performances in a highly bent state.     

TEM studies of strain-induced martensitic formation in fatigued Fe-18Mn alloy

Austenitic Fe-18Mn alloy was cyclically deformed at various total strain amplitudes. The structural changes induced by cyclic straining in Fe-18Mn alloy were investigated by transmission electron microscopy. At a low strain amplitude of 0.4%, the formation ofε-martensite associated with deformation twins and stacking faults was observed in this alloy. As the applied strain amplitude was increased to 1.0%,α′-martensite embryos were induced in the alloy investigated. These embryos coalesce into a lath structure upon subsequent cyclic deformation.     

Optical backplane system using waveguide-embedded PCBs and optical slots

As discussed in this paper, a practical optical backplane system was demonstrated, using a waveguide-embedded optical backplane board, processing boards, and optical slots for board-to-board interconnection. A metal optical bench was used as a packaging die for the optical devices and the integrated circuit chips in both the transmitter and the receiver processing boards. The polymer waveguide was produced by means of a hot-embossing technique and was then embedded following a conventional lamination processes. The average propagation loss of these waveguides was approximately 0.1 dB/cm at 850 nm. The dimension and optical properties of the waveguide in an optical backplane board were unchanged after lamination. As connection components between transmitter/receiver processing boards and an optical backplane board, optical slots were used for easy and repeatable insertion and extraction of the boards with a micrometer-scale precision. A 1/spl times/4 850-nm vertical-cavity surface-emitting laser array was used with 2 dBm of output power for the transmitter and a p-i-n photodiode array for the receiver. This paper successfully demonstrates 8 Gb/s of data transmission between the transmitter processing board and the optical backplane board.