An immune oriented multi-agent system for biological image processing

In this article, we present a parallel image processing system based on the concept of reactive agents. Our system lies in the oRis language, which allows to describe finely and simply the agents’ behaviors to detect image features. We also present a method of segmentation using a multi-agent system, and two biological applications made with oRis. The stopping of this multi-agent system is implemented through a technique issued from immunology: the apoptosis.     

Neural-Net Analysis of the Plasticity of ÉP-450 Ferrite–Martensite Steel with Different Alloying Element Concentrations

The results of a computational experiment with a neural-net model simulating the effect of the chemical composition on the plastic properties of ÉP-450 steel are presented. It is shown that computer-aided development of reactor steel with prescribed properties is, in principle, possible.     

Mechanisms and Special Features of the Thermodeformational Behavior of a Channel Pipe and Graphite Elements in RBMK Reactors During Heating Due to an Accident

Two- and three-parameter quadratic fitting curves, characterizing the basic thermal and deformational parameters of the state of the structural components of a RBMK technological channel heated as a result of an accident, are constructed on the basis of numerical simulation. The parameters characterizing the accidental heating are assumed to be the heat flux density on the inner surface of the channel pipe, the pressure in the channel, and the thermal resistance on contact surfaces. The output functions are the temperature of the channel pipe at the moment it sets on the graphite, the rate of heating, the average rate of radial expansion of the pipe before and after it sets on the graphite, and the temperature of the surface of the opening in the block at the moment the pipe sets on the graphite. The fitting relations constructed can be used to obtain real-time estimates of the basic thermal and deformational characteristics of the heating process due to the accident and to develop new integral criteria for the integrity of a damaged RBMK channel.     

SVBR-75/100 Multipurpose Modular Low-Power Fast Reactor with Lead–Bismuth Coolant

The results of development work on the SVBR-75/100 modular fast reactor cooled by lead–bismuth coolant are presented. The design is based on the experience gained operating reactors in nuclear-powered submarines. The SVBR-75/100 reactor is inherently safe because of its low power, the chemical inertness and high boiling point of the lead–bismuth coolant, and the integrated basin-type arrangement of the first-loop equipment. This eliminates the conflict between the safety and economic requirements that is characteristic of conventional-type reactors. The lower power makes it possible to build the reactor in a factory and deliver the reactor using any form of transportation to the nuclear power plant site. All safety systems operate passively. Most of these systems are used as normal-operating systems. This creates conditions for multipurpose applications of such reactor modules in developed and developing countries.     

Reliability of the Coolant Flow Rate Measuring System at the Ignalina Nuclear Power Plant

Age assessment and control of the reliability of the coolant flow-rate measurement system of the RBMK-1500 reactor at the Ignalina nuclear power plant are examined. A statistical analysis is made of the data obtained from measurements of the techanical characteristics of SHADR-32M flow meters. A mathematical model of the aging of flow meters and reliability estimates is constructed. A strategy is developed for replacing SHADR; this strategy makes it possible to support the required relaibility of the entire coolant flow-rate measurement system.     

Structured optimal and robust control with multiple criteria: a convex solution

In this paper, the design of controllers that incorporate structural and multiobjective performance requirements is considered. The control structures under study cover nested, chained, hierarchical, delayed interaction and communications, and symmetric systems. Such structures are strongly related to several modern-day and future applications including integrated flight propulsion systems, platoons of vehicles, micro-electro-mechanical systems, networked control, control of networks, production lines and chemical processes. It is shown that the system classes presented have the common feature that all stabilizing controllers can be characterized by convex constraints on the Youla-Kucera parameter. Using this feature, a solution to a general optimal performance problem that incorporates time domain and frequency domain constraints is obtained. A synthesis procedure is provided which at every step yields a feasible controller together with a measure of its performance with respect to the optimal. Convergence to the optimal performance is established. An example of a multinode network congestion control problem is provided that illustrates the effectiveness of the developed methodology.     

Mg AZ80/SiC composite bars fabricated by infiltration of porous ceramic preforms

Semi-industrial samples of Mg AZ80/SiC/50p composites (machined bars with o.d.=80 mm and length=150 mm, having a maximum 2 vol pct of retained porosity) were successfully fabricated by pressureless, low-pressure (under overpressure of about 0.3 MPa) and moderate-pressure (under overpressure of about 0.8 MPa) infiltration. Pressureless infiltration was completed in 24 hours under the flowing atmosphere of nitrogen, whereas the moderate and low-pressure infiltrations were performed under a static atmosphere of pressurized nitrogen for 7 and 0.5 hours, respectively. The composite samples obtained by all applied infiltration paths posessed a homogeneous microstructure and superior mechanical properties as compared to the nonreinforced matrix. Due to the improved productivity of composite fabrication in comparison with the other two infiltration paths investigated in this work, the moderate-pressure infiltration process was recognized as the most competitive.     

Choice With Initial and Terminal Link Reinforcement: An Alternative Self-Control Paradigm.

Self-control is demonstrated when a less desirable immediate outcome is chosen to ensure a substantially better future. In a novel animal analogue of this situation, primary reinforcement was delivered in both the initial and terminal links of a concurrent chain schedule. Rats made initial link choices between equal amounts of ethanol-free or ethanol-containing milk. Choosing the ethanol-free reinforcer resulted in delivery of the larger terminal link reinforcer and was thus analogous to self-control. Self-control decreased as the delay between initial and terminal links increased. The results have implications for human choice situations where decisions are made between two immediately available reinforcement alternatives each associated with a different delayed outcome. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Second-order stresses and strains in heterogeneous steels: Self-consistent modeling and X-ray diffraction analysis

Theoretical and experimetal methods have been developed to characterize the effect of mechanical loading on the mesoscopic and macroscopic mechanical state of polycrystalline materials. Ferritic and austenitic single-phase materials were first analyzed, then phase interaction was studied in a multiductile phase material (austeno-ferritic duplex steel) and a natural reinforced composite (pearlitic steel). The theoretical method is based on the self-consistent approach in which elastic and plastic characteristics of the phases have been applied through the micromechanical behavior of single-crystal-using slip systems and microscopic hardening. The effects of a crystallographic texture and phase interaction during loading and after unloading were studied. The elastic and plastic anisotropy of the grains having the same crystallographic orientation were assessed by diffraction strain analysis. The simulation was compared with the experiments performed using the X-ray diffraction technique. In the considered duplex and pearlitic steels, it was observed that the ferrite stress state is much lower than the austenite and cementite ones. The results of diffraction strain distribution have showed the pertinence of the models and give valuable information, for example, for the yield stress and the hardening parameters of each phase in a two-phase material.